BLXVQ - HIGH VISCOSITY LOWER UNIT GEAR LUBE, SB 836

  • MSDS: BLXVQ
  • Manufacturer: WITCO CORP
  • Product Name: HIGH VISCOSITY LOWER UNIT GEAR LUBE, SB 836
  • National Stock Number: 9150-00N019280
Product Identification

Product ID:HIGH VISCOSITY LOWER UNIT GEAR LUBE, SB 836
MSDS Date:01/18/1988
FSC:9150
NIIN:00N019280
MSDS Number: BLXVQ

Responsible Party
WITCO CORPORATION
1400 S HARRISON
OLATHE, KS 66061
US

Emergency Phone: 913-782-5800;800-424-9300(CHEMTREC)

Info Phone: 913-782-5800

Preparer: RAY D. LAWSON

Cage: 2M865

Contractor
WITCO CORPORATION
1974 BROOKLYN, NY 11231-2193 US

Telephone: 718-858-5678

Cage: 2M865

Ingredients

5MG/M3 TWA/PEL


ADDITIVES

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NO DATA AVAILABLE. CHRONIC:
NONE WHEN USED WITH GOOD PERSONAL HYGIENE PRACTICES, MAY OTHERWISE
CAUSE SKIN AND EYE IRRITATION UPON PROLONGED OR REPEATED EXPOSURE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: IMMED FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST
15 MIN. SKIN: REMOVE EXCESS WITH CLOTH OR PAPER. WASH THOROUGHLY
WITH SOAP AND WATER. INHAL: REMOVE VICTIM TO FRESH AIR. INGEST:
CONTACT P HYS IMMED.

Fire Fighting

Flash Point Method:COC
Flash Point:180F,82C
Extinguishing Media:DRY CHEMICAL, WATERFOG, CO2, FOAM OR SAND/EARTH.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:DENSE SMOKE.

Accidental Release

Spill Release Procedures:TRANSFER BULK OF MIXTURE INTO ANOTHER
CONTAINER. ABSORB RESIDUE WITH AN INERT MATERIAL SUCH AS EARTH,
SAND, OR VERMICULITE. SWEEP UP AND DISPOSE AS SOLID WASTE IN
ACCORDANCE WITH LOCAL, STATE, AND FED ERAL REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED UNTIL READY FOR
USE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V4
Spec Gravity:.897
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OILY AMBER FLUID WITH MINERAL OIL ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS HYDROGEN PEROXIDE, BROMINE, AND CHROMIC ACID.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO2 & CO FROM BURNING. OXIDES OF
PHOSPHORUS FROM BURNING. OXIDES OF SULFUR, OXIDES OF NITROGEN,
ALDEHYDES, KETONES.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.