Product ID:JUPITER/B
MSDS Date:04/01/1991
FSC:3439
NIIN:00N023401
MSDS Number: BLYKJ

Emergency Phone: 201-828-5353

Info Phone: 201-828-5353

Preparer: GARY L DUDA

Cage: 58495

Telephone: 201-828-5353

Cage: 58495

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC WELDING, BRAZING OR
SOLDERING MAY CREATE ONE OR MORE OF THE FOLLOWING HLTH HAZ: FUMES &
GASES CAN BE DANGEROUS TO YOUR HLTH. SHORT-TERM OVEREXP TO WELDING
FUMES MAY RESULT IN DISCOMFORT S UCH AS DIZZ, NAUS/DRYNESS/IRRIT OF
NOSE, THROAT/EYES. ARC RAYS CAN INJURE EYES AND BURN SKIN. (EFTS OF
OVEREXP)
Explanation of Carcinogenicity:NICKEL: GROUP 2B (IARC), GROUP 2 (NTP).
Effects of Overexposure:HLTH HAZ: ELECTRIC SHOCK CAN KILL. HEAT RAYS
(INFRARED RADIATION FROM FLAME OR HOT METAL) CAN INJURE EYES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:CALL FOR MEDICAL AIR. EMPLY FIRST AID TECHNIQUES RECOMMENDED
BY THE AMERICAN RED CROSS. INGEST: CALL MD IMMEDIATELY . INHAL:
REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTIFICIAL
RESPIRATI ON) . EYES: IMMEDIATELY FLUSH EYES WITH POTABLE WATER FOR
A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD . SKIN: FLUSH WITH
COPIOUS AMOUNTS OF WATER. CALL MD .

Flash Point:NON FLAMMABLE
Extinguishing Media:NON FLAMMABLE. USE MEDIA SUITABLE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NON FLAMMABLE: WELDING ARC AND SPARKS CAN
IGNITE COMBUSTIBLES.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:TRAIN THE WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
TRAIN THE WELDER NOT TO TOUCH LIVE ELECTRICAL PARTS AND TO INSULATE
HIMSELF FROM WORK AND GROUND.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WELDING, BRAZING, OR
SOLDERING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR VENT DOES NOT
KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT ARC (OR FLAME)/BOTH, TO
KEEP THE FUMES & GASES FROM WORKER'S BRTHG ZONE & GEN AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:FACESHLD W/FILTER LENS.
Other Protective Equipment:HAND, HEAD, AND BODY PROTECTION, ARM
PROTECTORS, APRONS, HATS, SHOULDER PROTECTION, AS WELL AS DARK
SUBSTANTIAL CLTHG.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
DECOMP PRODS:UPON THE METAL BEING WELDED/BRAZED, THE PROCESS, PROCEDURE
& FILLER METAL USED.OTHER CNDTNS WHICH ALSO INFLUENCE THE
COMPOSITION & QUANTITY OF FUMES & GASES TO WHICH WORKERS MAY BE
EXPSD INCL:COATINGS ON METAL BEING WELDED(SUCH AS PAINT,
PLATING/GALVANIZING), THE NUMBER OF WELDERS & THE VOLUME (ING 8)

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING & BRAZING FUMES & GASES CANNOT
BE CLASSIFIED SIMPLY.THE COMPOSITION & QUANTITY OF BOTH ARE
DEPENDENT (SUPP DATA)

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.