BLYZZ - JOINT COMPOUND - ALL PURPOSE

  • MSDS: BLYZZ
  • Manufacturer: UNITED STATES GYPSUM CO
  • Product Name: JOINT COMPOUND - ALL PURPOSE
  • National Stock Number: 5640-01-096-9980
Product Identification

Product ID:JOINT COMPOUND - ALL PURPOSE
MSDS Date:09/08/1989
FSC:5640
NIIN:01-096-9980
MSDS Number: BLYZZ

Responsible Party
UNITED STATES GYPSUM CO
101 S WACKER DR
CHICAGO, IL 60606-4385
US

Emergency Phone: 312-606-4542

Info Phone: 312-606-4542

Cage: 61357

Contractor
UNITED STATES GYPSUM CO
CHICAGO, IL 60606-4302 US

Telephone: 312-606-4000 (EMERG /4542)

Cage: 61357

Ingredients

CALCIUM CARBONATE; (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 50-85%

OSHA PEL 15 MG/M3 TDUST;5RESP

ACGIH TLV: 10 MG/M3 TDUST


SILICATE, MICA; (MICA-SILICATES (< 1% CRYSTALLINE SILICA))

CAS: 12001-26-2

RTECS: VV8760000

Fraction By Weight: 0-20%

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3 RDUST; 9293


TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 0-10%

OSHA PEL 2 MG/M3 RESP

ACGIH TLV: 2 MG/M3 RESP


KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 0-7%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293


POLYVINYL ALCOHOL

CAS: 9002-89-5

RTECS: TR8100000

Fraction By Weight: 0-3%


ACETIC ACID, VINYL ESTER, POLYMER; (POLYVINYL ACETATE)

CAS: 9003-20-7

RTECS: AK0920000

Fraction By Weight: 0-2%


HYDROXYPROPYL METHYLCELLULOSE; (M-HYDROXYPROPYL CELLULOSE)

CAS: 9004-65-3

RTECS: NF9125000

Fraction By Weight: 0-0.5%


CORN STARCH; (STARCH)

CAS: 9005-25-8

RTECS: GM5090000

Fraction By Weight: 0-0.3%

OSHA PEL 15 MG/M3 TDUST;5RESP

ACGIH TLV: 10 MG/M3


CELLULOSE, 2-HYDROXYETHYL ETHER; (HYDROXYETHYL CELLULOSE)

CAS: 9004-62-0

RTECS: FJ5958000

Fraction By Weight: 0-0.3%


ZINC, BIS(DIMETHYL DI THIOCARBAMATO)-; (ZIRAM)

CAS: 137-30-4

RTECS: ZH0525000

Fraction By Weight: 0-0.09%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: PARTICLES MAY CAUSE
IRRIT. SKIN: MAY DRY SKIN. INHAL: BRTHG OF MIXING DUST MAY CAUSE
IRRIT TO EYES, NOSE, THROAT/UPPER RESP SYSTEM. INGEST: NONE KNOWN.
CHRONIC: EYES/SKIN/INGEST: NONE KNO WN. INHAL: LONG TERM INHAL OF
LG AMTS OF RESPIRABLE MICA/TALC DUST CAN CAUSE LUNG DAM (PULMONARY
FIBROSIS).
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING UPPER RESPIRATORY AND
LUNG DISEASE SUCH AS, BUT NOT LIMITED TO, BRONCHITIS, EMPHYSEMA AND
ASTHMA.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES TO REMOVE
PARTICLES. IF IRRITATION CONTINUES, SEE MD. SKIN: WASH WITH SOAP
AND WATER. INHAL: REMOVE TO FRESH AIR. INGEST: NONE KNOWN. CALL MD
IF DISCOMFO RT OCCURS.

Fire Fighting

Flash Point:NONE
Extinguishing Media:NOT COMBUSTIBLE. USE MEDIA SUITABLE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:NONE. WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SWEEP UP. AVOID CREATING DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE A NIOSH/MSHA APPROVED DUST RESPIRATOR.
Ventilation:GENERAL MECHANICAL OR LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH WITH SOAP AND WATER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:2.6-2.7
Solubility in Water:0.2-0.25%
Appearance and Odor:GRAY OR BUFF COLORED POWDER; LOW ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:LANDFILL IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.