BLZHY - AW 106 AND ARALDITE 2001 COMPONENT A KIT P
- MSDS: BLZHY
- Manufacturer: M AND T CHEMICALS INC FURANE PRODUCTS DIV
- Product Name: AW 106 AND ARALDITE 2001 COMPONENT A KIT P
- National Stock Number: 2010-01-252-8348
Product Identification
Product ID:AW 106 AND ARALDITE 2001 COMPONENT A KIT P
MSDS Date:11/01/1986
FSC:2010
NIIN:01-252-8348
Kit Part:Y
MSDS Number: BLZHY
Responsible Party
LOS ANGELES, CA 90039-1011
US
Emergency Phone: 818-247-6210
Info Phone: 818-247-6210
Cage: 76323
Contractor
Telephone: 818-247-6210/800-873-1138
Cage: 76323
Ingredients
BISPHENOL-A EPOXY RESIN CONTAINING PLASTICISER AND FILLER
Fraction By Weight: 100% %
Hazards
LD50 LC50 Mixture:> 10000 MG/KG ORAL LD50 (RATS)
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:STRONG IRRITANT TO SKIN IN UNCURED
STATE. STRONG EYE IRRITANT. NOT ACCUTELY HARMFUL BY INGESTION. NOT
EXPECTED TO BE AN INHALATION HAZARD.
Explanation of Carcinogenicity:PRODUCT CONTAINS NO INGREDIENTS
CURRENTLY CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA.
Effects of Overexposure:EYE IRRITATION, SKIN IRRITATION
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN CONTACT: IMMEDIATELY REMOVE LIQUIDS BY WIPING WITH
DISPOSABLE TOWELS AND THEN CLEANSE THE SKIN WITH RESIN-REMOVING
CREAM, FOLLOWED BY WASHING WITH SOAPY WATER. DO NOT USE SOLVENTS.
EYE: IMMEDIATE LY FLUSH WITH WATER FOR 15 MINUTES. INHALATION:
REMOVE TO FRESH AIR. INGESTION: IMMEDIATELY RINSE MOUTH WITH WATER.
DRINK PLENTY OF WATER. SEEK MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:CC
Flash Point:>392F,>200C
Lower Limits:NONFLAMMABLE
Upper Limits:NONFLAMMABLE
Extinguishing Media:WATERSPRAY OR FOAM OR CARBON DIOXIDE OR DRY POWDER
OR VAPORISING LIQUID
Fire Fighting Procedures:DO NOT USE WATER JETS. IN A SERIOUS FIRE IT
MAY BE NECESSARY TO WEAR A COMPRESSED AIR BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:AVOID PRODUCTS OF COMBUSTION WHILE
PUTTING OUT THE FIRE.
Accidental Release
Spill Release Procedures:CLEAN UP WITH ABSORBENT MATERIAL (SAND,
SAWDUST, COTTON WASTE, PAPER TOWELS, ETC). REMOVE THE CONTAMINATED
CLEANING MATERIAL TO A SAFE PLACE PENDING DISPOSAL. THE AFFECTED
AREA SHOULD BE WASHED WITH D ETERGENT SOLUTION, PREFERABLEY HOT.
RINSE W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINERS SECURELY CLOSED. STOW
THE CONTAINERS AWAY FROM FOOD, FOOD CONTAINERS AND CLOTHING.
Other Precautions:HANDLING TECHNIQUES MUST ENSURE THAT NO UNCURED EPOXY
MATERIAL COMES INTO CONTACT WITH EYES OR SKIN. CLEANLINESS AND
TIDINESS IN WORKING ARE OF THE UTMOST IMPORTANCE. REMOVE AND
ISOLATE CONTAMINATED C LOTHING; LAUNDER BEFORE REUSE.
Exposure Controls
Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS
Ventilation:THE WORK AREA MUST BE ADEQUATELY VENTILATED. VENTILATED
BENCH HOODS SHOULD BE PROVIDED FOR MIXING.
Protective Gloves:NITRILE, NATURAL RUBBER, POLYETHYLENE
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:OVERALLS, HEAVYDUTY APRONS, EMERGENCY
EYEWASH/SHOWER
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
WHENEVER THE FULLY CURED OR HARDENED MATERIAL IS TO BE MACHINED, THE
EQUIPMENT SHOULD BE PROVIDED WITH AN EFFECTIVE LOCAL EXTRACTION
SYSTEM. OPERATORS SHOULD WEAR EYE PROTECTION AND WHEN NECESSARY, AD
UST MASK PROTECTING THE NOSE AND MOUTH.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:100 UPA
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:INSOLUBLE
Stability
Stability Indicator/Materials to Avoid:YES
AMINE-BASED HARDENERS SUPPLIED WITH KIT UNTIL READY FOR USE
Stability Condition to Avoid:MOISTURE
Hazardous Decomposition Products:CARBON DIOXIDE AND CARBON MONOXIDE
UPON BURNING
Conditions to Avoid Polymerization:CONTACT WITH AMINE-BASED HARDENER
BEFORE READY FOR USE. WHEN BLENDED PRODUCT WILL HARDEN.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE LOCAL,
STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.