BLZHZ - ARALDITE HARDENER HV9530 AND ARALDITE 2001
- MSDS: BLZHZ
- Manufacturer: M AND T CHEMICALS INC FURANE PRODUCTS DIV
- Product Name: ARALDITE HARDENER HV9530 AND ARALDITE 2001
- National Stock Number: 2010-01-252-8348
Product Identification
Product ID:ARALDITE HARDENER HV9530 AND ARALDITE 2001
MSDS Date:04/01/1986
FSC:2010
NIIN:01-252-8348
Kit Part:Y
MSDS Number: BLZHZ
Responsible Party
LOS ANGELES, CA 90039-1011
US
Emergency Phone: 818-247-6210
Info Phone: 818-247-6210
Cage: 76323
Contractor
Telephone: 818-247-6210/800-873-1138
Cage: 76323
Ingredients
FORMULATED POLYAMINOAMIDE
Fraction By Weight: 100% %
Hazards
LD50 LC50 Mixture:LD50 ORAL (RAT) > 5000 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN IRRITANT, EYE IRRITANT
Explanation of Carcinogenicity:PRODUCT CONTAINS NO INGREDIENTS
CURRENTLY CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA.
Effects of Overexposure:SKIN IRRITATION, SEVERE EYE IRRITATION,
RESPIRATORY TRACT IRRITATION
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN: IMMEDIATELY REMOVE LIQUIDS FROM THE SKIN BY WIPING WITH
DISPOSABLE TOWEL; THEN WASH AFFECTED AREA THOROUGHLY WITH WARM
SOAPY WATER. ANY MATERIAL STILL ADHERING SHOULD BE REMOVED WITH
RESIN-REMOV ING CREAM. DO NOT USE SOLVENTS. EYES: FLUSH WITH WATER
FOR 15 MINUTES. INHALATION: REMOVE TO FRESH AIR. INGESTION:
IMMEDIATELY RINSE MOUTH. IF SWALLOWED, DRINK LOTS OF WATER. CONTACT
A PHYSICIAN.
Fire Fighting
Flash Point Method:CC
Flash Point:>230F,>110C
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:WATERSPRAY OR FOAM OR CARBON DIOXIDE OR DRY POWDER
OR VAPORISING LIQUID
Fire Fighting Procedures:DO NOT USE WATER JETS. IN A SERIOUS FIRE IT
MAY BE NECESSARY TO WEAR A COMPRESSED AIR BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:AVOID PRODUCTS OF COMBUSTION WHILE
PUTTING OUT THE FIRE.
Accidental Release
Spill Release Procedures:FLUSH AFFECTED AREA THOROUGHLY WITH WATER.
CLEAN UP WITH ABSORBENT MATERIAL (SAND, SAWDUST, COTTON WASTE,
PAPER TOWELS, ETC.). REMOVE CONTAMINATED ABSORBENT TO A SAFE PALCE
PENDING DISPOSAL. THEN WASH AREA WITH DETERGENT SOLUTION,
PREFERABLY HOT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE CONTAINERS SECURELY IN A COOL,
DRY PLACE. STORE AWAY FROM FOOD AND FOOD CONTAINERS.
Other Precautions:WHENEVER THE FULLY CURED OR HARDENED MATERIALS IS TO
BE MACHINED, THE EQUIPMENT SHOULD BE PROVIDED WITH AN EFFECTIVE
LOCAL EXTRACTION SYSTEM. OPERATORS SHOULD WEAR EYE PROTECTION AND A
DUST MASK.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:GOOD GENERAL (MECHANICAL) VENTILATION SHOULD BE SUFFICIENT.
MIXING SHOULD TAKE PALCE IN A VENTILATED HOOD.
Protective Gloves:NITRILE, NATURAL RUBBER, POLYETHYLENE
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:OVERALLS AND HEAVY-DUTY APRONS, EMERGENCY
EYEWASH AND SHOWER
Work Hygienic Practices:SKIN SHOULD BE THOROUGHLY CLEANSED AS A
STANDARD ROUTINE AFTER WORK AND BEFORE EATING, DRINKING, SMOKING.
Supplemental Safety and Health
WHEN WORK IS TO BE CARRIED OUT IN A TANK OR SIMILAR CONFINED SPACE, A
PERMIT-TO-WORK SYSTEM SHOULD BE IMPLEMENTED. THE SYSTEM SHOULD
INCLUDE BREATHING APPARATUS, A SAFETY HARNESS AND LINE, AND A SECON
D MAN IN ATTENDANCE WITH RESERVE BREATHING APPARATUS. NOTE: KIT
P/N TL5493.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:4 PA @20C
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:INSOLUBLE
Appearance and Odor:PASTE, NO ODOD SPECIFIED
Stability
Stability Indicator/Materials to Avoid:YES
EPOXY RESINS
Stability Condition to Avoid:EXTREME TEMPERATURES
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.
OXIDES OF NITROGEN
Conditions to Avoid Polymerization:AVOID CONTACT WITH EXPOXY RESINS
UNTIL READY FOR USE
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE LOCAL,
STATE AND FEDERAL REGULTIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.