Product ID:GAS ALLOY, 14410
MSDS Date:11/08/1988
FSC:3439
NIIN:00N025500
MSDS Number: BMBND

PREMIER INDUSTRIAL CORPORATION

4500 EUCLID AVE
CLEVELAND, OH 44103
US

Emergency Phone: 216-391-8300

Info Phone: 216-391-8300

Preparer: R.S.

Cage: 18399

PREMIER FARNELL CORPORATION

CLEVELAND, OH 44103-3736 US

Telephone: 216-391-8300

Cage: 18399

COPPER

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 40-70%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ZINC

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 30-60%

OSHA PEL 10 MG/M3 (TDUST)

ACGIH TLV: 10 MG/M3 (TDUST)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

BORIC ACID, DISODIUM SALT; (BORATES)

CAS: 1330-43-4

RTECS: VZ2240000

Fraction By Weight: 10-30%

OSHA PEL 10 MG/M3

ACGIH TLV: 1 MG/M3

WHEN PRESENT AS FUME INGS TOTAL WT% ARE <100% ONLY IF ALL

RTECS: 9999999ZZ

(OSHA, WHMIS, SARA), ANY STATE OR PROVINCE, OR LOCAL

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: IRRITATION. CHRONIC:
RESPIRATORY OVEREXP TO WELDING FUMES MAY RSLT IN DIZZ, NAUS,
DRYNESS, IRRIT OF NOSE, THROAT, EYES. CHRONIC EXCESS WELDING FUMES
ABOVE PEL/TLV MAY BE HAZ BECAUSE PRLNG D/RPTD INHAL MAY BE HARMFUL
TO RESP SYSTEM.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES. CALL MD. SKIN: WASH THOROUGHLY WITH PLENTY OF WATER &
SOAP. INHAL: REMOVE TO FRESH AIR, ADMINISTER O*2 & CALL MD. INGEST:
SEEK MD IMMED, SHOW MSDS OR LABEL, INDUCE VOMITING.

Extinguishing Media:WATER/FOG/FOAM/DRY CHEMICAL/CARBON.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:CONTAIN & PICK-UP WASTE MATERIALS. PUT IN A
SEALED APPROVED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:ARCS, SPARKS, & FLAME MAY BE A SOURCE
OF IGNITION/COMBUST MATLS. DO NOT BREATHE DUSTS. IF VENT IS
INADEQUATE, WEAR NIOSH/MSHA APPRVD RESP EQUIP.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. ALWAYS READ & FOLLOW
DIRECTIONS ON PRODUCT LABEL. ADDITIONAL TECHNICAL DATA SHEETS
AND/MSDS ARE AVAILABLE UPON REQUEST. FOR PROFESSIONAL AND
INDUSTRIAL USE ONLY.

Respiratory Protection:USE NIOSH/MSHA APPROVED HOOD, RESPIRATOR OR
SUPPLIED AIR MASK.
Ventilation:LOCAL AND MECHANICAL REQUIRED.
Protective Gloves:WELDERS PROTECTIVE GLOVES
Eye Protection:FACESHIELD & COLORED ABSORPTIVE LENS.
Other Protective Equipment:WELDERS LEATHER APRON, SLEEVES, AND
LEGGINGS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD: DEPEND ON ALLOY BEING WELDED, PROCESS, PROC &
ELECTRODES USED. CONTITUENTS OF FUME MAY BE DIFFERENT FROM
INGREDIENTS LISTED & MAY INCLUDE PARTICLES CONTAINING IRON,
MANGANESE, SILICON , CHROMIUM, NICKEL OR OTHER AMORPHOUS SLAGS.
GASES MAY INCLUDE CO, OZONE, METAL OXIDES, METAL FLUORIDES.

HCC:N1
Appearance and Odor:SOLID FLUX-COATED ROD

Stability Indicator/Materials to Avoid:YES
NO
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES & GASES FROM WELDING & HIGH TEMP
CUTTING CANNOT BE CLASSIFED SIMPLY. COMPOSITION & QUANTITY OF BOTH
(SUPP DATA)

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.