BMBQK - X-63

  • MSDS: BMBQK
  • Manufacturer: TECHNI CAST CORP
  • Product Name: X-63
  • National Stock Number: 3439-00N025762
Product Identification

Product ID:X-63
MSDS Date:03/16/1989
FSC:3439
NIIN:00N025762
MSDS Number: BMBQK

Responsible Party
TECHNI-CAST CORP
11220 SOUTH GARFIELD
SOUTH GATE, CA 90280
US

Emergency Phone: 213-923-4585

Info Phone: 213-923-4585

Preparer: ROBERT CONGER

Cage: 5E264

Contractor
TECHNI-CAST CORP
SOUTH GATE, CA 90280-7508 US

Telephone: 213-923-4585

Cage: 5E264

Ingredients

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IDLH LEVEL HAS NOT BEEN ESTAB
FOR CU DUSTS/MISTS. MAY CAUSE METAL FUME FEVER. CHRONIC:PNEUM &
ALLERGIC ASTHMA. LEAD MAY CAUSE POISONING WHEN INGESTED. CERTAIN
FORMS OF CR IV HAVE BEEN FOUND TO C AUSE INCR RESP CANCER. CERTAIN
OTHER FORMS MAY NOT BE CARCIN. NIOSH REC REG AS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CHROMIUM & CERTAIN CR CMPDS:IARC GRP 1,
NTP GRP 1. NICKEL & NI CMPDS:IARC GRP 1, NTP GRP 2. (SUPP DATA)
Effects of Overexposure:HLTH HAZ:CARCIN & CONSIDERED IN WORKPLACE AS
CARCINOGENIC UNLESS DEMONSTRATED ONLY NON-CARCIN CMPDS ARE PRESENT.
UNCONTROLLED ABRASIVE BLASTING W/SILICA SAND PRESENTS A SEVERE
SILICOSIS HAZARD. NIOSH HAS REC SILICA SAND/OTHER MATLS CONTAINING
>1% FREE SILICA, BE PROHIB IN ABRASIVE BLASTING OPERATIONS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:IRRIGATE IMMEDIATELY W/LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. SKIN:WASH W/SOAP & WATER PROMPTLY. INHAL:ARTF
RESP IF BREATHING HAS STOPPED. INGEST:ADMINISTER WATER & INDUCE
VOMIT.

Fire Fighting

Flash Point:NONE
Extinguishing Media:DRY POWDER OR SAND.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:CLEAN SPILLS IMMEDIATELY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE.
Other Precautions:CASTINGS MAY HAVE SHARP EDGES.

Exposure Controls

Respiratory Protection:AVOID BRTHG FUMES. ALL RESPS MUST BE NIOSH/MSHA
APPRVD:USE HIGH EFFICIENCY PARTIC RESP W/DUST CONCS >50 MG/M3. IF
DUST CONCS REACH LEVEL >2000 MG/M3 O*2 BRTHG APPARATUS IS REQD.
RESP USE CNDTNS ARE RE COM SEPARATELY FOR NICKEL METAL (SUPDAT)
Ventilation:USE MECHANICAL VENTILATION IN CLOSED AREAS. LOCAL EXHAUST
VENTILATION REQUIRED.
Protective Gloves:CASTINGS MAY HAVE SHARP EDGES.
Eye Protection:CHEM WORK GOGG WHEN GRINDING.
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLAN OF CARCIN:CRYSTALLINE SILICA:IARC GRP 2A,NTP GRP 2; LEAD IARC
GRP 2B. RESP PROT:& SOLUBLE CMPDS:@ 5 MG/M3, DUST/MIST RESP.@ 10
MG/M3,DUST/MIST RESP EXCEPT SINGLE USE/QUARTER MASK RESPS.@ 50 MG/
M3,HIGH EFFIC PARTIC RESP.@ 1000 MG/M3,POWERED AIR PURIFYING RESP
W/HIGH EFFICIENCY FILTER.@ 2000 MG/M3 SUPPL (ING 19)

Chemical Properties

HCC:T6
Melt/Freeze Pt:M.P/F.P Text:2500F,1371C
Vapor Pres:SOLID
Vapor Density:SOLID
Spec Gravity:7.58
Evaporation Rate & Reference:SOLID
Solubility in Water:NOT SOLUBLE
Appearance and Odor:GRAYISH METAL W/BLUISH TINGE. COLOR MAY VARY
W/COMPOSITION.
Percent Volatiles by Volume:NONE

Stability

Stability Indicator/Materials to Avoid:YES
HALOGENATED ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE I/A/W STATE, FEDERAL & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.