BMBVQ - AMERLITE IRA-402 RESIN, 69653

  • MSDS: BMBVQ
  • Manufacturer: ROHM AND HAAS CO
  • Product Name: AMERLITE IRA-402 RESIN, 69653
  • National Stock Number: 6810-00-347-4190
Product Identification

Product ID:AMERLITE IRA-402 RESIN, 69653
MSDS Date:12/27/1990
FSC:6810
NIIN:00-347-4190
MSDS Number: BMBVQ

Responsible Party
ROHM AND HAAS CO
INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19105
US

Emergency Phone: 215-502-2000/CHEMTREC 800-424-9300

Info Phone: 215-502-2000/CHEMTREC 800-424-9300

Cage: 77902

Contractor
ROHM AND HAAS CO
PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

Ingredients

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MATERIAL CAN CAUSE THE FOLLOWING:
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH A LARGE AMOUNT OF WATER FOR AT LEAST 15 MIN.
CONSULT PHYS IF IRRITATION PERSISTS. SKIN: FLUSH WITH COPIOUS
AMOUNTS OF WATER. CALL MD . INHAL: REMOVE TO FRESH AIR. SUPPORT
BRTHG. (GIVE O*2/ARTF RESP) . INGEST: CALL MD IMMED .

Fire Fighting

Extinguishing Media:USE FOLLOWING EXTINGUISHING MEDIA WHEN FIGHTING
FIRES INVOLVING THIS MATERIAL: CARBON DIOXIDE-DRY CHEMICAL-WATER
SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTION GENERATED TOXIC FUMES OF
FOLLOWING: NITROGEN OXIDES-HYDROGEN CHLORIDE.

Accidental Release

Spill Release Procedures:FLOOR MAY BE SLIPPERY; USE CARE TO AVOID
FALLING. TRANSFER SPILLED MATERIAL TO SUITABLE CONTAINERS FOR
RECOVERY OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:MAX RECOM OPERATING TEMP FOR MATL IS
77C/170F. PROPERLY DESIGNED EQUIP IS VITAL IF THESE ION EXCHANGE
RESINS ARE TO BE USED IN CONJUNCTION (SUPP DATA)
Other Precautions:MIN RECOM STOR TEMP FOR MATERIAL IS OC/32F. MAX RECOM
STOR TEMP FOR MATERIAL IS 60C/140F. KEEP FROM FREEZING; MATERIAL
STABILITY MAY BE AFFECTED.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION
PROGRAM MEETING OSHA 1910.134 AND ANSI Z88.2 REQUIREMENTS MUST BE
FOLLOWED WHENEVER WORKPLACE CONDITIONS WARRANT A RESPIRATOR'S USE.
NONE REQUIRED UNDER NORM AL OPERATING CONDITIONS.
Ventilation:VENT SYS EMPLOYED IS DEPENDED ON USER'S SPEC APPLICATN OF
MATL. REFER TO CURRENT EDITION OF INDUST VENT:MANUAL (ING 3)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES.
Other Protective Equipment:FACILITIES STORING OR UTILIZING MATERIAL
SHOULD BE EQUIPPED WITH AN EYEWASH FACILITY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:5-9(AQUEOUS SLURRY). HNDLG/STOR PREC:W/STRONG OXIDIZING AGENTS SUCH
AS NITRIC ACID TO PVNT RAPID BUILD-UP OF PRESS/POSS EXPLOS. CONSULT
SOURCE KNOWLEDGEABLE IN HNDLG OF MATL BEFORE PRECEDING. DO NO T
PACK COLUMN W/DRY ION EXCHANGE RESINS. DRY BEADS EXPAND WHEN
WETTED; EXPANSION CAN CAUSE GLASS COLUMNS TO SHATTER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17MM HG
Vapor Density:<1
Spec Gravity:1.05-1.15
pH:SUPDAT
Evaporation Rate & Reference:<1 H*2O(BAC=1)
Solubility in Water:PRACTICALLY SOLUBLE
Appearance and Odor:BEADS.
Percent Volatiles by Volume:45-65

Stability

Stability Indicator/Materials to Avoid:NO
STRONG OXIDIZING AGENTS, PARTICULARLY CONCENTRATED NITRIC ACID.
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 200C/392F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD THE
FOLLOWING: MONOMER VAPORS-OXIDES OF NITROGEN-ALKYLAMINES-HYDROGEN
CHLORIDE.

Disposal

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE AND FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, USER MUST DETERMINE THE HAZARD AND USE AN
APPROPRIATE DISPOSAL METHOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.