Product ID:ARAMID-REINFORCED, EPOXY PREPREG
MSDS Date:02/09/1990
FSC:8030
NIIN:00N023453
MSDS Number: BMCJB

NORPLEX OAK

LACROSSE, WI 54602-1448
US

Emergency Phone: 608-784-6070

Info Phone: 608-784-6070

Cage: 0N092

NORPLEX OAK

LACROSSE, WI 54602-1448 US

Telephone: 608-784-6070

Cage: 0N092

ACETONE

CAS: 67-64-1

RTECS: AL3150000

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

FORMAMIDE, N,N-DIMETHYL-; (DIMETHYLFORMAMIDE)

CAS: 68-12-2

RTECS: LQ2100000

OSHA PEL 10 PPM, S

ACGIH TLV: 10 PPM, S

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ETHANOL,2-METHOXY-; (2-METHOXYETHANOL) (EGME) (2MEA)

CAS: 109-86-4

RTECS: KL5775000

OSHA PEL 25 PPM, S

ACGIH TLV: 5 PPM, S

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PRIMARY EXPOSURE ROUTE IS INHALATION
OF DUST WHEN MACHINED/PUNCHED OR FUMES WHEN HEATED. EYE:DUST MAY
CAUSE MODERATE IRRITATION. FUMES MAY IRRITATE EYES. SKIN:DUST MAY
CAUSE MODERATE IRRITATION. SKIN ABSORPTION/INGEST:NOT DETERMINED.
INHAL:ARAMID FIBER DUST AND RESIN DUST MAY BE RELEASED WHEN
MACHINED.
Explanation of Carcinogenicity:DIMETHYLFORMAMIDE: IARC GROUP 2B
Effects of Overexposure:INHALATION OF DUST MAY CAUSE RESPIRATORY
IRRITATION. NIOSH RECOMMENDS 2MEA BE REGARDED IN THE WORKPLACE AS
HAVING POTENTIAL TO CAUSE ADVERSE REPRODUCTIVE EFFECTS IN
MALE/FEMALE WORKERS .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:IRRIGATE WITH WATER FOR AT LEAST 15 MIN. SKIN:WASH IN
FLOWING WATER OR SHOWER. REMOVE CONTAMINATED CLOTHING. INGEST:IF
LARGE AMOUNTS ARE INGESTED, CONSULT PHYS. INHAL:IF OVERECOME BY
DUST/SMOKE, MOVE TO FRESH AIR. IF NOT BREATHING, GIVE MOUTH-TO
MOUTH RESUSCITATION. CALL PHYS.

Extinguishing Media:WATER, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED POSITIVE PRESSURE
SCBA AND FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:MAY GIVE OFF TOXIC HYDROGEN BROMIDE GAS
WHEN THERMALLY DECOMPOSED.

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF RESPIRATORY PROTECTION IS REQUIRED, USE
NIOSH/MSHA APPROVED DUST RESPIRATOR.
Ventilation:CONTROL AIRBORNE DUST CONCENTRATIONS WITH ADEQUATE
VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:BODY-COVERING CLOTHING, APRONS WHEN
PROLONGED OR FREQUENTLY REPEATED CONTACT OCCURS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:1.5+/-0.25
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOW TO AMBER SHEETS, NONE UNLESS HEATED.

Stability Indicator/Materials to Avoid:YES
NOT DETERMINED.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2, HBR, OXIDES OF NITROGEN.

Waste Disposal Methods:BURY IN GOVERNMENT-APPROVED LANDFILL. BE SURE TO
FOLLOW ALL LOCAL, STATE, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.