Product ID:OMNI-BOND ADHESIVE WITH MIXERS PART B, 4345
MSDS Date:09/27/1988
FSC:8040
NIIN:00N025501
Kit Part:Y
MSDS Number: BMCNC

PREMIER INDUSTRIAL CORPORATION

4500 EUCLID AVE
CLEVELAND, OH 44103
US

Emergency Phone: 216-391-8300

Info Phone: 216-391-8300

Preparer: T.G.

Cage: 18399

PREMIER FARNELL CORPORATION

CLEVELAND, OH 44103-3736 US

Telephone: 216-391-8300

Cage: 18399

METHYLAMINE, M-PHENYLENEBIS-; (M-XYLYLENEDIAMINE (M-XYLENE

CAS: 1477-55-0

RTECS: PF8970000

Fraction By Weight: 3.0%

OSHA PEL 0.1 MG/M3, S, C

ACGIH TLV: 0.1 MG/M3, S, C

DIETHYLTOLUENEDIAMINE

CAS: 68479-98-1

Fraction By Weight: 4.0%

AROMATIC BISTHIODIAMINE

CAS: 52411-33-3

Fraction By Weight: 10.0%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MODERATELY TOXIC BY ORAL EXPOSURE.
EXCESSIVE OR CHRONIC EXPOSURE MAY CAUSE LIVER DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES AND CALL PHYSICIAN. SKIN: WASH SKIN WITH ISOPROPANOL & THEN
WITH PLENTY OF SOAP & WATER. INHALATION: IF AFFECTED, REMOVE TO
FRESH AI R, ADMINISTER OXYGEN & CALL PHYSICIAN. INGESTION: SEEK
PHYSICIAN IMMEDIATELY, SHOW MSDS OR LABEL, DO NOT INDUCE VOMITING.

Flash Point:200F,93C
Lower Limits:0.9%
Upper Limits:9.5%
Extinguishing Media:WATER, FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:EVACUATE AREA, VENT AREA, WEAR NIOSH/MSHA
APPROVED RESPIRATORY PROTECTION, WEAR SUITABLE PROTECTIVE CLOTHING,
GLOVES, AND EYE/FACE PROTECTION. CLEAN UP WITH ABSORBENT MATERIAL,
CONTAIN AND PICK-UP WAS TE MATERIAL, PUT IN SEALED APPROVED
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM HEAT/FLAME. USE ONLY
W/ADEQ VENT. AVOID PRLNGD BRTHG OF VAP/SPRAY MIST. IF VENT IS
INADEQ, WEAR NIOSH/MSHA APPRVD RESP EQUIPMENT.
Other Precautions:AVOID CONTACT WITH EYES AND SKIN. DO NOT TAKE
INTERNALLY. WASH THOROUGHLY AFTER USING. KEEP CONTAINERS CLOSED
WHEN NOT IN USE. IN CASE OF ACCIDENT/ILLNESS, SEEK PHYS IMMED &
SHOW MSDS/LABEL. KEEP OUT OF REACH OF CHILDREN. ALWAYS (SUPP DATA)

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR SUITABLE PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC: READ AND FOLLOW DIRECTIONS ON PRODUCT LABEL. ADDITIONAL
TECHNICAL DATA SHEETS AND/OR MATERIAL SAFETY DATA SHEETS (MSDS) ARE
AVAILABLE UPON REQUEST. FOR PROFESSIONAL AND INDUSTRIAL USE ONLY .

HCC:N1
Vapor Pres:0.5
Spec Gravity:1.05
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:AMBER LIQUID, MILD ODOR.
Percent Volatiles by Volume:>0.01

Stability Indicator/Materials to Avoid:YES
STRONG BASES, WATER, PEROXIDES.
Stability Condition to Avoid:HEAT AND MOISTURE.
Hazardous Decomposition Products:CO, CO*2, AMINES, PYROLYSIS PRODUCTS.
Conditions to Avoid Polymerization:HEAT AND FLAME.

Waste Disposal Methods:DISPOSE OF WASTES IN ACCORDANCE WITH FEDERAL,
STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.