BMGGS - SOLDER
- MSDS: BMGGS
- Manufacturer: NON FERROUS METALS INC
- Product Name: SOLDER
- National Stock Number: 3439-00N024714
Product Identification
Product ID:SOLDER
MSDS Date:05/18/1989
FSC:3439
NIIN:00N024714
MSDS Number: BMGGS
Responsible Party
SEATTLE, WA 98134
US
Emergency Phone: 206-624-8414
Info Phone: 206-624-8414
Cage: 22365
Contractor
Telephone: 206-624-8414
Cage: 22365
Ingredients
ANTIMONY
CAS: 7440-36-0
RTECS: CC4025000
Fraction By Weight: 0-1%
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
SHOWN TO CAUSE BENIGN PNEUMOCONIOSIS.
RTECS: 9999999ZZ
WHEN HEAVY METAL EXPOS ARE ABOVE PEL/TLV.
RTECS: 9999999ZZ
THE FEDERAL STANDARD FOR OCCUP EXPOS
RTECS: 9999999ZZ
AREAS. USER SHLD BE CAREFUL NOT TO INHALE SMOKE
RTECS: 9999999ZZ
USING PROD. WORK CLOTHES/EQUIP SHLD REMAIN IN
RTECS: 9999999ZZ
W/PERSONAL CLTHG. LAUNDER CONTAMD CLTHG BEFORE
RTECS: 9999999ZZ
PROD IS INTENDED FOR INDUS, COMMERCIAL, & DOMESTIC
RTECS: 9999999ZZ
OR TLV SPECIFIED BY OSHA OR OTHER LOCAL, STATE AND
RTECS: 9999999ZZ
WATER DISPOSED OF I/A/W LOC/STATE/FED
RTECS: 9999999ZZ
WORN AS APPROP FOR INDUSTRIAL ENVIRON. PERSONAL
RTECS: 9999999ZZ
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 1-70%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
LEAD
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 30-99%
OSHA PEL 0.05 MG/M3
ACGIH TLV: 0.15 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IF LEFT UNTREATED: WEAK, VOMIT,
LOSS OF APPETITE, UNCOORDINATED BODY MOVEMENTS, CONVULSIONS,
STUPOR, BLOODY STOOLS & POSS COMA. CHRONIC: IF LEFT UNTREATED:
WEAK/INSOM/HYPERTENS/ SLIGHT IRRIT TO SKIN & EYES/METALLIC TASTE
IN MOUTH/ANEMIA/CONSTIP/HDACH/ MUSC & JOINT PAINS/ NEUROMUSCULAR
DYSFUNCTION/POSS (SUPP DATA
Explanation of Carcinogenicity:LEAD :IARC GROUP 2B
Effects of Overexposure:INHAL: DUST/VAP/FUME MAY BE IRRIT TO RESP SYS &
CAN RSLT IN BOTH ACUTE/CHRONIC OVEREXP. SKIN: DUST/VAP/FUME MAY
CAUSE IRRIT. SKIN ABSORPTION:DUST/VAP/FUME ARE NOT READILY ABSORBED
THRU SKIN. EYE: DUST /VAP/FUME MAY CAUSE IRRIT. INGEST:
DUST/VAP/FUME MAY BE ABSORBED BY DIGEST SYS & CAN RSLT IN BOTH
ACUTE/CHRONIC OVEREXP.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH W/COPIOUS QTYS OF H2O FOR A MINIMUM OF 15 MIN.
GET IMMED MED ATTN. SKIN: WASH THORO W/SOAP & WATER. INHAL: REMOVE
FROM EXPOS. GET MED ATTN IF EXPERIENCING EFTS OF OVEREXP. INGEST:
GET IMME D MED ATTN. NOTES TO MD: LEAD & ITS INORGANIC CMPDS ARE
NEUROTOXINS WHICH MAY PRDCE PERIPHERAL NEUROPATHY. FOR AN OVERVIEW
EFTS OF LEAD EXPOS, CONSULT OSHA APPENDIX A OF OCCUP EXPOS TO (SUPP
DATA)
Fire Fighting
Extinguishing Media:DRY CHEMICAL OR CO2 SHOULD BE USED ON SURROUNDING
FIRE. DO NOT USE WATER ON FIRES WHERE MOLTEN METAL IS PRESENT.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED POSITIVE PRESSURE
SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MOLTEN METALS PRODUCE FUME/VAP &/OR DUST
THAT MAY BE TOXIC &/OR RESPIRATORY IRRITANTS. THE PROD, OR ITS
DUST, CAN REACT VIGOROUSLY W/STRONG OXIDIZING AGENTS.
Accidental Release
Spill Release Procedures:DUST MATL SHLD BE VACUUMED OR WET SWEPT WHERE
VACUUMING IS NOT FEASIBLE. PARTICULATE MATTER SHLD BE STORED IN DRY
CONTAINERS FOR LATER DISPOSAL. DO NOT USE COMPRESSED AIR OR DRY
SWEEPING AS A MEANS OF CLEANING.
Handling
Handling and Storage Precautions:STORE IN DRY AREA WHERE ACCIDENTAL
CONT W/ ACIDS IS NOT POSS. AVOID SKIN CONT. ADHERE TO ALL PERSONAL
PROT EQUIP PROC WHEN HNDLG & VENT REQS (ING 5)
Other Precautions:2 MAJOR MEANS OF HEAVY METAL ABSORPTION:
INHAL/INGEST. MOST INHAL PROBLEMS CAN BE PVNTD W/ADEQ USE OF
VENT/RESP INFO. ALWAYS EXERCISE NORMAL/GOOD PERSONAL HYGIENE PRIOR
TO SMKG/EATING. SMKG/EATING SHL D BE CONFINED TO NON-CONTAMD (ING
7)
Exposure Controls
Respiratory Protection:AS SPECIFIED BY 29CFR1910.1025 SUBPART(F) OF FED
OCCUP SFTY & HLTH ADMIN STD FOR OCCUP EXPOS TO LEAD. OTHER
LOC/STATE REGS MAY ALSO APPLY. NIOSH/MSHA APPRVD RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONC ERN .
Ventilation:VENT, AS DESCRIBED IN INDUS VENT MANUAL PRDCED BY ACGIH,
SHALL BE PROVIDED IN AREAS WHERE EXPOS ARE ABOVE PEL (ING 11)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:COVERALLS OR OTHER FULL BODY CLTHG SHALL BE
WORN DURING PROD USE & PROPERLY LAUNDERED AFTER USE, W/THE WASH
(ING 12)
Work Hygienic Practices:LAUNDER CONTAMD CLTHG BEFORE REUSE. WASH HANDS/
FACE/NECK/ARMS THOROUGHLY BEFORE EATING/SMOKING.
Supplemental Safety and Health
HLTH HAZ: PARALYSIS & ENCEPHALOPATHY/METAL FUME FEVER/LOSS OF
APPETITE/NAUS & PNEUMOCON. FIRST AID PROC: LEAD (29CFR1910.1025).
ANTIMONY/TIN/INORGANIC TIN CMPDS ARE PRIMARY CHEM IRRIT OF SKIN.
CHRONIC EFTS OF ANTIMONY INGEST MAY RESEMBLE THOSE OF ARSENIC.
ANTIMONY IS SEV PULM IRRIT & STANNIC OXIDE HAS BEEN (ING 4)
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>3171F
Melt/Freeze Pt:M.P/F.P Text:361F,183C
Spec Gravity:8.6-11.3
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITISH-GRAY METAL; NO APPARENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND THIS PRODUCT MAY LIBERATE HYDROGEN GAS.
Hazardous Decomposition Products:HIGH TEMPERATURES MAY PRODUCE HEAVY
METAL FUME, VAPOR AND/OR DUST.
Disposal
Waste Disposal Methods:DISPOSE OF TOXIC SUBSTANCES & HAZARDOUS WASTES
I/ A/W LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.