BMGQT - DTE OIL HEAVY MEDIUM

  • MSDS: BMGQT
  • Manufacturer: MOBIL OIL CORP
  • Product Name: DTE OIL HEAVY MEDIUM
  • National Stock Number: 9150-01-015-2185
Product Identification

Product ID:DTE OIL HEAVY MEDIUM
MSDS Date:06/19/1991
FSC:9150
NIIN:01-015-2185
MSDS Number: BMGQT

Responsible Party
MOBIL OIL CORP
3225 GALLOWS RD
FAIRFAX, VA 22037
US

Emergency Phone: 609-737-4411;800-424-9300(CHEMTREC)

Info Phone: 800-662-4525;800-227-0707

Preparer: ENVIRON HLTH & SFTY DEPT

Cage: 1E969

Contractor
MOBIL OIL CORP ENVIRONMENTAL AFFAIRS & TOXICOLOGY
PENNINGTON, NJ 08534 US

Telephone: 703-849-3265

Cage: 0AHK0

Ingredients

MINERAL OIL,PETROLEUM DISTILLATES, HYDROTREATED (MILD)

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: 95%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)


CHARACTERISTICS AT TIME OF DISPOSAL.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SLIGHT SKIN IRRITATION. SLIGHTLY TOXIC
IF INGESTED.
Explanation of Carcinogenicity:CAS NUMBER 64742-54-7 IS LISTED BY THE
RTECS AS AN IARC GROUP 1 CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: FLUSH THORO WITH WATER FOR AT LEAST 15 MINUTES. IF IRRIT
PERSISTS, CALL PHYS. SKIN: WASH CONTACT AREAS WITH SOAP AND WATER.
INHAL: NOT EXPECTED TO BE PROBLEM. INGEST: NOT EXPECTED TO BE
PROBLEM. HOWEVER, IF >1/2 LITER(PINT) INGESTED, IMMED GIVE 1-2
GLASSES OF WATER AND CALL PHYS, HOSPITAL EMER ROOM/POISON CNTRL
CENTER FOR ASSISTANCE. DO NOT INDUCE VOMIT/GIVE ANYTHING BY MOUTH
TO UNCON PERSON.

Fire Fighting

Flash Point Method:COC
Flash Point:>400F,>204C
Lower Limits:.6%
Upper Limits:7.0%
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL AND WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.H*2O/FOAM MAY CAUSE FROTHING.USE H*2O TO KEEP FIRE EXPOS
CNTNRS COOL.H*2O SPRAY MAY BE USED TO FLUSH(SUP DAT)
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:ABSORB ON FIRE RETARDANT TREATED SAWDUST,
DIATOMACEOUS EARTH, ETC. SHOVEL UP AND DISPOSE OF AT AN APPROPRIATE
WASTE DISPOSAL FACILITY IN ACCORDANCE WITH CURRENT APPLICABLE LAWS
AND REGULATIONS, AND PR ODUCT CHARACTERISTICS AT TIME OF DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NO SPECIAL REQUIREMENTS UNDER ORDINARY
CONDITIONS OF USE AND WITH ADEQUATE VENTILATION. USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NO SPECIAL REQUIREMENTS UNDER ORDINARY CONDITIONS OF USE
AND WITH ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:GOOD PERSONAL HYGIENE PRACTICES SHOULD ALWAYS
BE FOLLOWED.
Supplemental Safety and Health
FIRE FIGHT PROC: SPILLS AWAY FROM EXPOS.PVNT RUNOFF FROM FIRE
CNTRL/DILUTION FROM ENTERING STREAMS/SEWERS/DRINKING H*2O
SUPP.WASTE DISP METH:RECYCLING FACILITY/CAN BE DISP OF AT ANY
GOVERNMENT APPRVD WASTE DISP FACILITY.USE OF THESE METHS IS
SUBJECT TO USER COMPLIANCE W/APPLIC LAWS & REGS & CONSIDERATION OF
PROD(ING 2)

Chemical Properties

Boiling Pt:B.P. Text:>600F,>316C
Vapor Pres:<.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID, MILD ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE.

Disposal

Waste Disposal Methods:PROD IS SUITABLE FOR BURNING IN ENCLOSED CNTRLD
BURNER FOR FUEL VALUE/DISP BY SUPERVISED INCINERATION. SUCH BURNING
MAY BE LIMITED PURSUANT TO RESOURCE CONSERVATION & RECOVERY ACT. IN
ADDTN, PROD IS S UITABLE FOR PROCESSING BY APPRVD (SUPP DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.