BMHXP - VANGUARD

  • MSDS: BMHXP
  • Manufacturer: STATE CHEMICAL MFG CO
  • Product Name: VANGUARD
  • National Stock Number: 7930-00F020170
Product Identification

Product ID:VANGUARD
MSDS Date:05/01/1990
FSC:7930
NIIN:00F020170
MSDS Number: BMHXP

Responsible Party
STATE CHEMICAL MFG CO
3100 HAMILTON AVE
CLEVELAND, OH 44114

Emergency Phone: (216) 861-7114

Info Phone: (216) 861-7114

Cage: 53798

Contractor
STATE CHEMICAL MANUFACTURING CO.
CLEVELAND, OH 44114-3701 US

Telephone: 216-861-7114

Cage: 53798

Ingredients

FORMALDEHYDE (SARA III)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: <0.1%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


8.45

RTECS: 9999999WG

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION.
Explanation of Carcinogenicity:FORMALDEHYDE IS A SUSPECTED A2 & 2B
CARCINOGEN BY ACGIH.
Effects of Overexposure:EYES: IRRITATION.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY W/PLENTY OF COOL WATER FOR AT LEAST
15 MINS. SKIN: FLUSH W/WATER. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Flash Point:>200F

Accidental Release

Spill Release Procedures:FLUSH TO DRAIN.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING. AVOID EYE CONTACT.
DON'T REUSE EMPTY CONTAINERS FOR ANY OTHER PURPOSE. PREVENT REUSE
BY DESTROYING EMPTY CONTAINERS.
Other Precautions:READ & FOLLOW ALL LABEL PRECAUTIONS BEFORE USING THE
PRODUCT. THIS PRODUCT IS INTENDED FOR INDUSTRIAL & INSTITUTIONAL
USE ONLY. NOT INTENDED FOR HOUSEHOLD USE OR RESALE. KEEP OUT OF
REACH OF CHILDREN.

Exposure Controls

Ventilation:NO SPECIAL REQUIREMENTS
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:212-215F
Spec Gravity:1.013
pH: 8.9
Solubility in Water:COMPLETE
Appearance and Odor:WHITE EMULSION W/LIGHT CITRUS ODOR.
Percent Volatiles by Volume:>90/WT

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.