BMHYV - 746-0000 LATEX SG ENAMEL WHITE
- MSDS: BMHYV
- Manufacturer: DECRATREND PAINT CORP
- Product Name: 746-0000 LATEX SG ENAMEL WHITE
- National Stock Number: 8010-00F020196
Product Identification
Product ID:746-0000 LATEX SG ENAMEL WHITE
MSDS Date:08/04/1987
FSC:8010
NIIN:00F020196
MSDS Number: BMHYV
Responsible Party
CITY OF INDUSTRY, CA 91746
Emergency Phone: (818) 333-4592
Info Phone: (818) 333-4592
Cage: 42590
Contractor
Telephone: 818-333-4592
Cage: 42590
Ingredients
1,2-PROPANEDIOL (PROPYLENE GLYCOL)
CAS: 57-55-6
RTECS: TY2000000
Fraction By Weight: <5%
PROPANOIC ACID, 2-METHYL, MONOESTER
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: <5%
1.18 LB/GAL OR 142 G/L
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF MUCOUS
MEMBRANES OF THE NOSE, THROAT, & RESPIRATORY TRACT, HEADACHE, &
NAUSEA. EYES: IRRITATION. SKIN: IRRITATION, REDNESS, DRYING, &
DERMATITIS. INGESTION: GASTROINTESTINAL IRRITATION, NAUSEA,
VOMITING, DIARRHEA,& INTESTINAL SYSTEMS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION OF MUCOUS MEMBRANES OF
THE NOSE, THROAT, & RESPIRATORY TRACT, HEADACHE, & NAUSEA. EYES:
IRRITATION. SKIN: REDNESS, DRYING, IRRITATION, & DERMATITIS.
INGESTION: GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING,
DIARRHEA,& INTESTINAL SYSTEMS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP & WATER. INGESTION:
DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DON'T INDUCE VOMITING.
TREAT SYMPTOM ATICALLY. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:225F
Lower Limits:0.6%
Upper Limits:4.2%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, OR WATER FOG
Fire Fighting Procedures:COOL CONTAINERS W/WATER SPRAY.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HIGH
TEMPERATURES MAY EXPLODE OR BURST DUE TO BUILD UP OF STEAM
PRESSURE.
Accidental Release
Spill Release Procedures:DIKE, CONTAIN, OR ABSORB W/INERT MATERIAL SUCH
AS SAND OR VERMICULITE. TRANSFER TO CONTAINERS FOR RECOVERY OR
DISPOSAL. PREVENT RUNOFF INTO SEWERS, STREAMS, OR OTHER BODIES OF
WATER.
Handling
Handling and Storage Precautions:DON'T EXPOSE TO EXTREME TEMPERATURES.
AVOID EXPOSURE TO HIGH TEMPERATURES. DON'T ALLOW TO FREEZE. DON'T
TAKE INTERNALLY.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR & MIST
PROTECTION.
Ventilation:MECHANICAL/GENERAL OR LOCAL: ADEQUATE TO KEEP
Eye Protection:CHEMICAL SPLASH GOGGLES, SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING, & EYEWASH STATIONS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOHTING BEFORE
REUSE. WASH HANDS BEFORE EATING OR USING RESTROOMS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:365-471F
Vapor Density:
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETE
Appearance and Odor:TYPICAL FOR WATER BASED LATEX COATING
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:TOXIC MATERIAL, CO2, & CO
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.