BMJBB - V-105 QUICK DRY SANDING WOOD SEALER
- MSDS: BMJBB
- Manufacturer: MAUTZ PAINT CO
- Product Name: V-105 QUICK DRY SANDING WOOD SEALER
- National Stock Number: 8010-00F020224
Product Identification
Product ID:V-105 QUICK DRY SANDING WOOD SEALER
MSDS Date:01/01/1987
FSC:8010
NIIN:00F020224
MSDS Number: BMJBB
Responsible Party
MADISON, WI 53703
Emergency Phone: (608) 262-3702 OR (608) 255-1661
Info Phone: (608) 262-3702 OR (608) 255-1661
Cage: 0DHF1
Contractor
Telephone: (608) 262-3702 OR (608) 255-16
Cage: 0DHF1
Ingredients
LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA
CAS: 64742-89-8
Fraction By Weight: 57%
ACGIH TLV: 300 PPM
HYDROTREATED LIGHT DISTILLATE, PETROLEUM; C12-C15
CAS: 64742-47-8
Fraction By Weight: 4.6%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
7.1
RTECS: 9999999WG
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: IRRITATION &
DAMAGE. INHALATION: RESPIRATORY TRACT IRRITATION, HEADACHE,
DIZZINES, NAUSEA & PERMANENT BRAIN DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION & DAMAGE.
INHALATION: RESPIRATORY TRACT IRRITATION, HEADACHE, DIZZINESS,
NAUSEA & PERMANENT BRAIN DAMAGE.
First Aid
First Aid:EYES: FLUSH W/WATER. SKIN: WASH W/SOAP & WATER. INHALATION:
REMOVE TO FRESH AIR. GIVE CPR OR OXYGEN IF NEEDED. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:53F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM & NFPA CLASS B EXTINGUISHER
Fire Fighting Procedures:WATER MAY BE USED TO COOL CONTAINERS TO REDUCE
RATE OF BURNING & RESIST ADDITIONAL IGNITION OR EXPLOSION.
Unusual Fire/Explosion Hazard:CONTIANERS SHOULD BE KEPT TIGHTLY CLOSED.
FLAMMABLE LIQUID.
Accidental Release
Spill Release Procedures:ELMINATE SOURCES OF IGNITION. VENTILATE AREA.
SOAK UP SPILL W/ABSORBENT MATERIAL (SAWDUST). REMOVE W/GROUNDED
NONSPARKING EQUIPMENT.
Handling
Handling and Storage Precautions:ELMINATE IGNITION SOURCES. STORE IN A
AREA SUITABLE FOR FLAMMABLE OR COMBUSTIBLE LIQUIDS. DON'T TAKE
INTERNALLY.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED CHEMICAL CARTRIDGE RESPIRATOR
TO REMOVE SOLID AIRBORNE PARTICLES.
Ventilation:LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE BATH/SAFETY SHOWER
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:243-416F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:65.6%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT, OPEN FLAME, ELECTRICAL EQUIPMENT,
SPARKS & IGNITION SOURCES
Hazardous Decomposition Products:CO & CO2
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. FLAMMABLE LIQUID.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.