BMMFL - VINYL LIQUID PATCH
- MSDS: BMMFL
- Manufacturer: PDI INC
- Product Name: VINYL LIQUID PATCH
- National Stock Number: 8030-00F021614
Product Identification
Product ID:VINYL LIQUID PATCH
MSDS Date:07/06/1992
FSC:8030
NIIN:00F021614
MSDS Number: BMMFL
Responsible Party
BLAINE, MN 55434
US
Emergency Phone: 612-785-2156
Info Phone: 612-785-2156
Preparer: THOMAS M MILLER
Cage: 0B629
Contractor
Telephone: 612-785-2156
Cage: 0B629
Ingredients
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 18-20%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TETRAHYDROFURAN
CAS: 109-99-9
RTECS: LU5950000
Fraction By Weight: 59-61%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CYCLOHEXANONE, KETOHEXAMETHYLENE
CAS: 108-94-1
RTECS: GW1050000
Fraction By Weight: 2-3%
OSHA PEL 50 PPM
ACGIH TLV: 100 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
RESIN
Fraction By Weight: 18-20%
7.65
RTECS: 9999999WG
6.27
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRREGULAR HEARTBEAT. BRAIN
& NERVOUS SYSTEM DAMAGE. SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE, DIZZINESS, DROWSINESS,
FATIGUE. SKIN: DRYING, CRACKING, IRRITATION. EYES: IRRITATION.
Medical Cond Aggravated by Exposure:PRE-EXISTING HEART, LIVER, KIDNEY &
LUNG DISORDERS.
First Aid
First Aid:INGESTION: CONTACT PHYSICIAN. INHALATION: REMOVE TO FRESH
AIR. ADMINISTER OXYGEN OR ARTIFICIAL RESPIRATION IF NECESSARY.
EYES: FLUSH W/PLENTY OF WATER. SKIN: WASH W/SOAP & WATER. OBTAIN
MEDICAL ATTENT ION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:<20F
Lower Limits:1.1%
Upper Limits:11.8%
Extinguishing Media:CO2, DRY CHEMICAL, OR FOAM
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS W/A FULL
FACE PIECE, OPERATED IN PRESSURE DEMAND OR OTHER POSITIVE PRESSURE
MODE.
Unusual Fire/Explosion Hazard:THIS MATERIAL IS FLAMMABLE & MAY BE
IGNITED BY HEAT, SPARKS, FLAME OR STATIC ELECTRICITY. FLAMMABLE
LIQUID.
Accidental Release
Spill Release Procedures:WIPE UP W/FLOOR ABSORBENT. TRANSFER TO HOOD.
PREVENT RUN OFF TO SEWERS. ELIMINATE ALL SOURCES OF IGNITION.
VENTILATE AREA.
Handling
Handling and Storage Precautions:KEEP AWAY FROM SPARKS, FLAME & HIGH
HEAT SOURCES. DON'T STORE >120F. KEEP CONTAINER CLOSED WHEN NOT IN
USE.
Exposure Controls
Respiratory Protection:USE AN ORGANIC VAPOR CARTRIDGE, NIOSH/MSHA
APPROVED.
Ventilation:MECHANICAL (GENERAL): TO MAINTAIN EXPOSURE BELOW TLV. LOCAL
EXHAUST: SUPPLEMENTAL (IF NEEDED)
Protective Gloves:THERMAL IMPERVIOUS
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING/BOOTS
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:175F (79C)
Vapor Pres:145
Vapor Density:3
Spec Gravity:0.90-0.92
Evaporation Rate & Reference:(BU AC = 1): 5
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID, STRONG SOLVENT ODOR.
Percent Volatiles by Volume:82
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, OXIDIZING AGENT, SELECTED AMINES, CHEMICALLY
ACTIVE METALS, POWDERS
Stability Condition to Avoid:HEAT, SPARKS, FLAME, STATIC ELECTRICITY,
OR OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:CO & CO2
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. FLAMMABLE LIQUID. UN1133.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.