BMNXJ - WHITE BASE PREPOXY

  • MSDS: BMNXJ
  • Manufacturer: PRESERVATIVE PAINT CO
  • Product Name: WHITE BASE PREPOXY
  • National Stock Number: 8010-00N024842
Product Identification

Product ID:WHITE BASE PREPOXY
MSDS Date:07/11/1988
FSC:8010
NIIN:00N024842
MSDS Number: BMNXJ

Responsible Party
PRESERVATIVE PAINT CO
5410 AIRPORT WAY SOUTH
SEATTLE, WA 98108
US

Emergency Phone: 206-526-2121;206-634-5252

Info Phone: 206-763-0300

Cage: 86589

Contractor
PRESERVATIVE PAINT CO
80387 SEATTLE, WA 98108-1726 US

Cage: 86589

Ingredients

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 14%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


POLYAMID 800 CX60 SOLIDS

Fraction By Weight: 16.91%


EPOXY RESIN 471X75 SOLIDS

Fraction By Weight: 22.23%


HAZARDOUS MIXTURES CONTAINING INGREDIENTS 5-7.

RTECS: 9999999ZZ

Fraction By Weight: 46.86%

ACGIH TLV: 50 PPM (MFR)


XYLENE; (XYLOL)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 24.27%

OSHA PEL 100 PPM;150 STEL

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ETHANOL,2-BUTOXY-; (BUTYL CELLUSOLVE)

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 24.27%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293


2-PENTANONE,4-HYDROXY-4-METHYL-; (DIACETONE ALCOHOL)

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 18.76%

ACGIH TLV: 50 PPM

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL OF HIGH CONC OF VAP/MISTS MAY
LEAD TO ASPHYXIATION. PROMPT REMOVAL TO FRESH AIR USUALLY RESULTS
IN COMPLETE RECOVERY IF NORMAL RESPIRATION HAS BEEN STOPPED. MAY
CAUSE SKIN IRRIT. ANIMAL STUDIES HAVE CLEARLY DEMONSTRATED
DOSE-RELATED ADVERSE EFTS ON THE CNS, THE HEMATOPOIETIC TISSUE, THE
BLOOD, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:THE KIDNEYS, AND THE LIVER ASSOCIATED
WITH THE ADMINISTRATION OF ETHYLENE GLYCOL MONOBUTYL ETHER (EGBE)
AND ETHYLENE GLYCOL MONOBUTYL ETHER ACETATE (EGBEA). (EXTRACTED
FROM DHHS (NIOSH) PUBLI CATION NO. 90-118) .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN:WASH THOROUGHLY WITH SOAP AND WATER. REMOVE CONTAMINATED
CLOTHING AND WASH BEFORE REUSE. EYE:FLUSH WITH WATER FOR AT LEAST
15 MIN; IF IRRITATION PERSISTS, GET MED ATTN. INGEST:DO NOT INDUCE
VOMIT -CALL PHYS. INHAL:REMOVE TO FRESH AIR. SUPPORT BRTHG. (GIVE
O*2/ARTF RESP) .

Fire Fighting

Flash Point Method:TCC
Flash Point:60.0F,15.6C
Lower Limits:1%
Upper Limits:6.9%
Extinguishing Media:CO*2/DRY CHEMICALS. TURN OFF IGNITION.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:EXTINGUISH ALL SOURCES OF IGNITION IN VICINITY
OF SPILL OR RELEASED VAPORS; CLEAN UP SPILLS AS SOON AS POSSIBLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL, WELL VENTILATED AREA
AWAY FROM SOURCES OF IGNITION; CONTR OF MATL SHOULD HAVE FLAMM LIQ
"CAUTION" LBL. DO NOT STORE OVER 100F.
Other Precautions:MAY CAUSE SKIN IRRITATION.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR OR
GAS MASKS; PREFERABLE SCBA IF CONCENTRATION OF VAPOR EXCEED TLV.
Ventilation:LOCAL EXHAUST IF CONCENTRATION OF VAPOR IS EXCESSIVE.
Protective Gloves:NEOPRENE/RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:271F,133C
Vapor Pres:18@77F
Vapor Density:3.18
Spec Gravity:1.076
Evaporation Rate & Reference:0.51(BUTYL ACETATE=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:AROMATIC ODOR.
Percent Volatiles by Volume:46.35

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, AMINES AND ALKALIES.
Stability Condition to Avoid:WITH ACIDS, AMINES, ALKALIES.
Hazardous Decomposition Products:FOR NORMAL COMBUSTION, FORMS CO*2 AND
WATER VAPOR. INCOMPLETE COMBUSTION CAN FORM CO.
Conditions to Avoid Polymerization:ACIDS, AMINES AND BASES.

Disposal

Waste Disposal Methods:ABSORB LARGE SPILLS WITH CLAY, DIATOMACEOUS
EARTH. BURY IN LANDFILL. DISPOSE OF IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.