BMPQV - CONCRETE BONDING ADHESIVE, 9902

  • MSDS: BMPQV
  • Manufacturer: QUIKRETE CO
  • Product Name: CONCRETE BONDING ADHESIVE, 9902
  • National Stock Number: 5610-00N025561
Product Identification

Product ID:CONCRETE BONDING ADHESIVE, 9902
MSDS Date:01/01/1988
FSC:5610
NIIN:00N025561
MSDS Number: BMPQV

Responsible Party
QUIKRETE CO
1790 CENTURY CIRCLE
ATLANTA, GA 30345
US

Emergency Phone: 404-634-9100

Info Phone: 404-634-9100

Cage: QUIKR

Contractor
QUIKRETE CO
ATLANTA, GA 30345-5000 US

Telephone: 404-634-9100

Cage: QUIKR

Ingredients

ACETIC ACID, VINYL ESTER, POLYMER; (VINYL ACETATE

CAS: 9003-20-7

RTECS: AK0920000


FORMALDEHYDE (SARA III)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: <0.5%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


ACETIC ACID, VINYL ESTER; (VINYL ACETATE)

CAS: 108-05-4

RTECS: AK0875000

OSHA PEL 10 PPM/15 STEL

ACGIH TLV: 10 PPM/15,A3 STEL;93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


WATER

CAS: 7732-18-5

RTECS: ZC0110000


DISPOSE OF SOLIDS IN LANDFILL. EMULSIONS

RTECS: 9999999ZZ


FEDERAL, ST & LOCAL REGS REGARDING HLTH & POLLUTION

RTECS: 9999999ZZ


RECOVERED MATERIAL.

RTECS: 9999999ZZ


SHOWN FORMALDEHYDE TO CAUSE CANCER IN LAB

RTECS: 9999999ZZ


PROPERTIES.THE ODOR DETECTION LEV VARIES AMONG

RTECS: 9999999ZZ


WILL OCCUR FROM RPTD EXPOS BUT SENSITIVITY RETURNS

RTECS: 9999999ZZ


FORMALDEHYDE. WHETHER RISK EXISTS AT LEVS

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:THE PRINCIPAL VOLATILE COMPONENT IS
WATER. MINOR VOLATILE COMPONENTS ARE FORMALDEHYDE & VINYL ACETATE.
BOTH MINOR COMPONENTS WILL MIGRATE FROM EMULSION & ESTABLISH AN
EQUILIBRIUM CNDTN BETWEEN HEADSPA CE IN THE STORAGE CNTNR & LIQ
EMULSION.LEVS IN EXCESS OF TLV'S (2PPM FOR FORMALDEHYDE, 10PPM FOR
VINYL(EFTS OF OVEREXP)
Explanation of Carcinogenicity:FORMALDEHYDE: GROUP 2A (IARC); GROUP 2
(NTP); OSHA REGULATED.
Effects of Overexposure:HLTH HAZ: ACETATE) CAN ACCUMULATE IN NON-VENTED
HEADSPACES ABOVE STORED EMULSION. CARE MUST BE EXERCISED TO VENT
HEADSPACE OF STORAGE TANKS W/HUMIDIFIED AIR. DRUMS SHOULD BE OPENED
IN WELL VENT SPACE. FORMALDEHYDE CONC IN THE WORK PLACE MAYEXCEED
TLV UNDER SOME CNDNTS OF USE. ALTHOUGH FORMALDEHYDE IS A MINOR(SUPP
DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYE: IF SPLASHED IN EYE,
FLUSH WITH COPIOUS QUANTITIES OF WATER FOR AT LEAST 15 MINUTES AND
SEEK MEDICAL ADVICE. INGEST: INGEST AMTS ARE NOT ANTICIPATED TO
PRODUCE ADVE RSE HLTH EFTS, BUT SHOULD BE REMOVED FROM STOMACH BY
INDUCED VOMIT/ASPIR. CALL MD. INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ARTF RESP) .

Fire Fighting

Extinguishing Media:FOR DRY POLYMER, USE WATER OR CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.WHEN POLYMER BURNS, WATER, CO*2, CO & SMOKE ARE PRODUCED.
PYROLYSIS PRODS MAY INCL SUCH MATL (SUPP DATA)
Unusual Fire/Explosion Hazard:THERE ARE NO UNUSUAL FIRE OR EXPLOSION
HAZARDS.

Accidental Release

Spill Release Procedures:IF MATL IS RELS/SPILL, DAM UP TO LIM
SPREAD.MOP UP/ABSORB ON INERT MATL & PLACE IN CNTNRS.IF SPILL
OCCURS IN ENCLSD AREA, VENT.POLYMER MAY BE SEPARATED FROM WATER BY
ADDTN OF ALUM & FERRIC CHLORIDE.FO R FURTHER SPILL PROC REFER TO
ORIGINAL MSDS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL PLACE, AVOID FREEZING.
MINIMIZE CONT W/AIR TO PVNT INNOCULATION W/MICROORGANISMS WHICH CAN
CAUSE DECOMP & MOLDY OVERGROWTH.
Other Precautions:THE PROD WILL IMPART A WHITE MILKY COLOR TO WATER.
WHEN WATER IS AGITATED/IS TURBULENT, FOAMING CAN RESULT. AS
SUPPLIED/DILUTED, PROD MATL (FOAM INCL) WHEN SPLASHED ON AUTOS OR
OTHER PERSONAL PROPERTY IS DIFFICULT TO REMOVE IF ALLOWED DRY.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:IF HEADSPACE VENT IS REQUIRED, USE HUMIDIFIED AIR TO REDUCE
SKIN FORMATION ON THE EMULSION SURFACE.
Protective Gloves:RUBBER PROTECTIVE GLOVES ARE REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NORMAL CLEANLINESS SHOULD BE OBSERVED.
Supplemental Safety and Health
FIRE FIGHT PROC:AS ACETIC ACID, ACROLEIN/ACETALDEHYDE. MASKS TO REMOVE
SMOKE & ORG VAP FROM RESP AIR ARE RECOMMENDED FOR USE WHEN FIGHTING
FIRES INVOLVING VINYL ACETATE POLYMERS & COPOLYMERS. EFTS OF
OVEREXP:VOLATILE COMPONENT OF THESE EMULSION PRODS, IT IS IMPORTANT
TO RECOGNIZE THAT RECENT TEST RESULTS HAVE (ING 8)

Chemical Properties

HCC:T6
Solubility in Water:WATER MISCIBLE
Appearance and Odor:WHITE, MOBILE LIQUID, WITH A PLEASANT, SWEET ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
SULFURIC ACID OR ALKALI MATERIALS SUCH AS SODIUM OR METAL HYDRIDES.
Stability Condition to Avoid:COAGULATION MAY OCCUR FOLLOWING FREEZING,
THAWING OR BOILING.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:FOR SM SPILLS (PROBABLY LESS THAN 100 GALLONS),
DILUTE W/WATER. WASH INTO INDUSTRIAL SEWER. (WARNING, CONSULT LOCAL
SEWER AUTHORITY BEFORE DISCHARGING). FOR LRG QTYS, PLACE IN
SETTLING POND & ADD FERR IC CHLORIDE & LIME. DECANT WATER. (ING 5)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.