Product ID:LINSEED OIL, BOILED
MSDS Date:10/01/1990
FSC:8010
NIIN:00-244-8961
MSDS Number: BMPZW

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 409-756-1065

Preparer: DAVID M SHIPP

Cage: CHEMS

Telephone: 704-821-9822

Cage: 5W216

BOILED LINSEED OIL

CAS: 8001-26-1

RTECS: OI9690000

Fraction By Weight: 100%

OSHA PEL NONE

ACGIH TLV: NONE

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION: MILD IRRITATION OF NOSE
AND THROAT. EYE: MAY CAUSE REDNESS AND TEARING. SKIN ABSORPTION:
SENSITIVE INDIVIDUALS MAY EXPERIENCE DERMATITS AFTER LONG EXPOSURE
OF OIL ON SKIN. INGESTION: LARGE AMOUNTS MAY CAUSE GASTOINTESTINAL
UPSET.

First Aid:EYE: FLUSH WITH CLEAN LUKEWARM WATER FOR AT LEAST 15 MIN,
OCCASIONALLY LIFTING THE EYELIDS. SKIN: MAY BE REMOVED FROM SKIN BY
WASHING WITH SOAP AND WARM WATER. INHALATION: EXPOSED INDIVIDUAL TO
FRESH AIR SOURCE. INGESTION: KEEP PERSON WARMAND QUIET AND SEEK
MEDICAL ADVICE FOR PREVENTION OF POSSIBLE DEHYDRATION.

Flash Point Method:PMCC
Flash Point:>200F,93C
Autoignition Temp:Autoignition Temp Text:650F
Extinguishing Media:FOAM, CO2, DRY CHEMCIAL OR SAND IS RECOMMENDED.
Fire Fighting Procedures:AVOID USE OF WATER BUT IF ONLY ALTERNATIVE,
IMPLEMENT. USE WATER TO KEEP FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:RAGS AND WASTE PAPAER CONTAINING THIS
MATERIAL MAY HEAT AND BURN SPONTANEOUSLY. STORE WIPING RAGS
CONTAINING THIS MAT'L IN METAL CANS WITH TIGHT LIDS.

Spill Release Procedures:DEPENDING UPON QUANTITY OF SPILL: (A) SMALL
SPILLS CAN BE PICKED UP WITH ABSORBENT MATERIAL AND TRANSFERRED TO
CONTAINERS; (B) LARGE SPILLS CAN BE SCOOPED UP AND PUT INTO
CONTAINERS OR SALVAGED. SEE D ISPOSAL PRECAUTIONS.

Handling and Storage Precautions:STORE AWAY FROM HIGH TEMPERATURES &
FLAMES. DON'T BREATHE SPRAY MIST. CONTAINERS BE PROFESSIONALLY
RECONDITIONED FOR REUSE/DISPOSED BY CERTIF FIRMS.
Other Precautions:AVOID SPONTANEOUS COMBUSTION OF CONTAMINATED RAGS AND
OTHER EASILY IGNITABLE ACCUMULATIONS (EXAMPLE: SPRAY BOOTH RESIDUE)
BY IMMEDIATE IMMERSION IN WATER. EMPTY DRUMS SHOULD NOT BE GIVEN TO
PERSONS.

Respiratory Protection:NOT NORMALLY NEEDED.
Ventilation:INTERMITTENT CLEAN AIR EXCHANGES RECOMMENDED BUT NOT
REQUIRED.
Protective Gloves:NEOPRENE RUBBER GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS.
Other Protective Equipment:EYE BATH AND SAFETY SHOWER. TO PREVENT
REPEATED OR PROLONGED SKIN CONTACT, WEAR IMPERVIOUS CLOTHING AND
BOOTS.
Work Hygienic Practices:EYE WASHES AND SAFETY SHOWERS IN THE WORKPLACE
ARE RECOMMENDED.
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:NONE
Spec Gravity:0.9422
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER, OILY LIQUID.
Percent Volatiles by Volume:0
Corrosion Rate:NOT CORR

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:N/K SPONTANEOUS COMBUSTION 21FEB92UR.

Waste Disposal Methods:CAREFULLY INCINERATE OR USE SECURE LANDFILL IN
ACCORDANCE WITH FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.