Product ID:SCOTCH-WELD 1751 PART A
MSDS Date:07/20/1990
FSC:8040
NIIN:00-959-1854
Kit Part:Y
MSDS Number: BMQJV

3M CO. ADHESIVES COATINGS AND SEALERS DIV.

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Preparer: C A EISENHARD

Cage: 04963

CHEMICAL COMMODITIES AGENCY, INC.

HIGHLAND, CA 92346-2640 US

Telephone: 909-864-2310

Cage: 60777

POLYAMIDE RESIN

CAS: 68410-23-1

Fraction By Weight: 70-80%

TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 5-15%

CLAY

CAS: 68953-58-2

Fraction By Weight: 1-10%

AMORPHOUS SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-10%

ACGIH TLV: 3 MG/M3; 6 MG/M3 TWA

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE: IRRITATION FROM DIRECT CONTACT.
SKIN: MODERATE IRRITATION. MAY CAUSE SENSITIZATION IN CERTAIN
SUSCEPTIBLE INDIVIDUALS. INHALE: MAY BE IRRITATING TO NOSE AND
THROAT. INGEST: MAY CAUSE DIGESTIVE SY STEM IRRITATION.

First Aid:EYE: IMMEDIATELY FLUSH EYES WITH WATER FOR AT LEAST 10 MIN.
CALL A PHYSICIAN. SKIN: WASH WITH SOAP & WATER. INHALE: REMOVE TO
FRESH AIR. CALL A PHYSICIAN. INGESTION: DO NOT INDUCE VOMITING.
IMMEDIATEL Y CALL A PHYSICIAN OR POISON CONTROL CENTER.

Flash Point:NA
Extinguishing Media:CO2, FOAM, DRY CHEMICALS
Fire Fighting Procedures:FIREFIGHTERS SHOULD BE EQUIPPED WITH
SELF-CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING
THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:VENTILATE THE AREA. COLLECT SPILLED MATERIAL.
PLACE IN A US DOT APPROVED METAL CONTAINER AND SEAL.

Handling and Storage Precautions:THIS MATERIAL IS PART OF A TWO
COMPONENT SYSTEM. THE PRECAUTIONS FOR EACH COMPONENT SHOULD BE
OBSERVED WHEN SEPARATE OR MIXED. AVOID EYE/SKIN CONTACT.
Other Precautions:AVOID BREATHING VAPORS RELEASED DURING HEAT CURING.
AVOID EYE CONTACT WITH OR BREATHING DUST FROM CUTTING, GRINDING OR
SANDING OPERATIONS ON THE CURED MATERIAL. KEEP CONTAINER CLOSED
WHEN NOT IN USE. KEEP OUT OF THE REACH OF CHILDREN.

Respiratory Protection:WEAR DUST MASK TO AVOID DUST EXPOSURE.
Ventilation:SUFFICIENT VENTILATION TO MAINTAIN VAPOR CONCENTRATIONS
BELOW RECOMMENDED EXPOSURE LIMITS. PROPERLY VENT CURING OVENS.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES OR CHEMICAL GOGGLES
Other Protective Equipment:PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Spec Gravity:0.950
Viscosity:100000-*
Solubility in Water:NIL
Appearance and Odor:AMBER PASTE, AMINE ODOR

Stability Indicator/Materials to Avoid:YES

Waste Disposal Methods:MIX PARTS A & B. COMPLETELY CURE & DISPOSE OF
CURED WASTED PRODUCT IN SANITARY LANDFILL. INCINERATE UNCURED
PRODUCT AFTER MIXING WITH FLAMMABLE MATERIAL IN
INDUSTRIAL/COMMERCIAL FACILITY. DISPOSAL SHO ULD BE IN ACCORDANCE
W/APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.