BMQKB - THYODENE

  • MSDS: BMQKB
  • Manufacturer: POLYSCIENCES INC
  • Product Name: THYODENE
  • National Stock Number: 6810-00-985-7087
Product Identification

Product ID:THYODENE
MSDS Date:01/07/1988
FSC:6810
NIIN:00-985-7087
MSDS Number: BMQKB

Responsible Party
POLYSCIENCES INC
400 VALLEY ROAD
WARRINGTON, PA 18976
US

Emergency Phone: 215-343-6484

Info Phone: 215-343-6484

Cage: 9C365

Contractor
POLYSCIENCES INC
WARRINGTON, PA 18976 US

Telephone: 215-313-6484

Cage: 9C365

Ingredients

THYODENE

Fraction By Weight: 100%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MATERIAL IS CONSIDERED TO BE
NON-TOXIC. INGESTION OF LARGE AMOUNTS MAY CAUSE GI DISTURBANCES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: WASH AFFECTED AREA WITH COPIOUS AMOUNTS OF WATER. EYE:
FLUSH WITH WATER FOR AT LEAST 15 MINUTES. INHAL: REMOVE TO FRESH
AIR; GIVE OXYGEN OR ARTIFICIAL RESPIRATION, AS NEEDED. INGEST:
LARGE AMOUN TS MAY CAUSE GASTROINTESTINAL DISTURBANCES DUE TO
INABILITY OF DIGESTIVE SYSTEM TO PROCESS LARGE AMOUNTS OF
CARBOHYDRATES. SEEK MEDICAL TREATMENT IF DISCOMFORT PERSISTS.

Fire Fighting

Extinguishing Media:WATER, CO*2, DRY CHEMICAL POWDER, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NO ACUTE HAZARD; AVOID BREATHING VAPORS
OR DUST.

Accidental Release

Spill Release Procedures:SWEEP-UP AND COLLECT WASTE MATERIAL. WEAR
RESPIRATOR, RUBBER BOOTS AND RUBBER GLOVES. AVOID RAISING DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE MATERIAL AT ROOM TEMPERATURE;
KEEP STORAGE CONTAINER TIGHTLY CLOSED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE MATERIAL WITH ADEQUATE VENTILATION.
Protective Gloves:RUBBER GLOVES RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWER AND EYE BATH, RUBBER BOOTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:DEC.
Evaporation Rate & Reference:N/A (BUTYL ACETATE = 1)
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE POWDERY SOLID; ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO; CO*2.

Disposal

Waste Disposal Methods:BURN WASTE MATERIAL IN A SUITABLY EQUIPPED
CHEMICAL INCINERATOR. KEEP WASTE MATERIAL OUT OF SEWERS, WATERWAYS
AND OTHER WATER SOURCES. DISPOSE OF RESIDUES IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL R EGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.