BMQRC - BAYSILONE FLUID M10,DAMPING FLUID
- MSDS: BMQRC
- Manufacturer: MOBAY CORP
- Product Name: BAYSILONE FLUID M10,DAMPING FLUID
- National Stock Number: 9150-00-024-9621
Product Identification
Product ID:BAYSILONE FLUID M10,DAMPING FLUID
MSDS Date:07/03/1990
FSC:9150
NIIN:00-024-9621
MSDS Number: BMQRC
Responsible Party
PITTSBURG, PA 15205-9741
US
Emergency Phone: 412-923-1800
Info Phone: 412-777-2194
Preparer: L.A. VAN KEUREN
Cage: EO419
Contractor
Telephone: 800-662-2927
Cage: EO419
Ingredients
SILICON FLUID
CAS: 63148-62-9
Fraction By Weight: 100%
Hazards
LD50 LC50 Mixture:LD 50 ORAL RAT IS > 5000 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ON THE BASIS OF ANIMAL TOXICITY
TESTING, THIS PRODUCT IS EXPECTED TO BE NON-IRRITATING TO THE EYES
AND SKIN AND ESSENTIALLY NON-TOXIC BY INGESTION. THIS PRODUCT CAN
FORM AN OIL FILM ON THE EYEBALL WHI CH MAY CAUSE A TEMPORARY
HARMLESS AND REVERSIBLE CLOUDING OF VISION. NO CHRONIC EFFECTS
EXPECTED.
Explanation of Carcinogenicity:NONE OF THE INGREDIENTS IN THIS PRODUCT
IS LISTED BY NTP, IARC OR OSHA AS A CARCINOGEN.
Effects of Overexposure:CLOUDED VISION.
Medical Cond Aggravated by Exposure:NONE KNOWN
First Aid
First Aid:IN CASE OF EYE CONTACT, FLUSH EYES WITH PLENTY OF WATER FOR
AT LEAST 15 MINUTES. CALL A PHYSICIAN IF IRRITATION PERSISTS. IN
CASE OF SKIN CONTACT, REMOVE PRODUCT MECHANICALLY, THEN WASH WITH
SOAP AND WATER. IF SWALLOWED, CALL A PHYSICIAN.
Fire Fighting
Flash Point Method:COC
Flash Point:>575F,>302C
Autoignition Temp:Autoignition Temp Text:>752F
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.
Accidental Release
Spill Release Procedures:USE PROTECTIVE CLOTHING AND EQUIPMENT. SPILLS
SHOULD BE TAKEN UP WITH SUITABLE ABSORBENT AND PLACED IN
CONTAINERS. SPILL AREA CAN BE WASHED WITH WATER; COLLECT WASH WATER
FOR APPROVED DISPOSAL. CLEAN UP SPILLS PROMPTLY TO MINIMIZE SLIP
HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN DRY PLACE, AWAY FROM
EXCESSIVE HEAT, IN ORIGINAL OR SIMILAR WATERPROOF CONTAINERS.
RESEAL CONTAINERS IMMEDIATELY AFTER USE.
Other Precautions:PRODUCT MAY BECOME ELECTROSTATICALLY CHARGED DURING
FILLING AND TRANSFERRING. MAKE SURE EQUIPMENT IS PROPERLY GROUNDED.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHEN HANDLED AT AMBIENT
TEMPERATURES.
Ventilation:NO SPECIAL REQUIREMENTS SPECIFIED BY MANUFACTURER.
Protective Gloves:PLASTIC OR RUBBER GLOVES RECOMMENDED.
Eye Protection:SAFETY GLASSES OR GOGGLES RECOMMENDED.
Other Protective Equipment:EMERGENCY SHOWERS AND EYE WASH STATIONS
SHOULD BE AVAILABLE.
Work Hygienic Practices:WASH AFTER HANDLING PRODUCT AND BEFORE EATING,
DRINKING OR SMOKING.
Supplemental Safety and Health
THIS PRODUCT IS NOT HAZARDOUS UNDER THE CRITERIA OF THE FEDERAL OSHA
HAZARD COMMUNICATION STANDARD 29 CFR 1910.1200 PER MANUFACTURER.
THIS MSDS GENERATED BY DGSC-SSH FROM ANOTHER HMIS RECORD BY THE SA
ME COMPANY.
Chemical Properties
HCC:V6
Vapor Pres:<0.01
Spec Gravity:0.971
Viscosity:500 CST @ 77F
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORLESS LIQUID. ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:EXCESSIVE TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICON OXIDE, SMALL AMOUNT OF FORMALDEHYDE.
Disposal
Waste Disposal Methods:WASTE DISPOSAL SHOULD BE IN ACCORDANCE WITH
EXISTING FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.