BMWBT - N172, 1,6-HEXANEDIAMINE
- MSDS: BMWBT
- Manufacturer: J T BAKER INC
- Product Name: N172, 1,6-HEXANEDIAMINE
- National Stock Number: 6810-00N029691
Product Identification
Product ID:N172, 1,6-HEXANEDIAMINE
MSDS Date:11/24/1986
FSC:6810
NIIN:00N029691
MSDS Number: BMWBT
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
1,6-HEXANEDIAMINE
CAS: 124-09-4
RTECS: MO1180000
Fraction By Weight: 90-100%
OSHA PEL 0.5 PPP; 9293
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT) 750 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DUST MAY IRRITATE OR BURN MUCOUS
MEMBRANES. INHALATION OF DUST MAY CAUSE IRRITATION TO UPPER
RESPIRATORY TRACT. CONTACT WITH SKIN OR EYES MAY CAUSE SEVERE
IRRITATION OR BURNS. SKIN ABSORPTION MAY BE H ARMFUL.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTF RESP.
IF BREATHING IS DIFFICULT, GIVE OXYGEN. EYES/ SKIN: IMMEDIATELY
FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES WHILE REMOVING
CONTAMIN ATED CLOTHING AND SHOES. WASH CLOTHING BEFORE REUSE.
INGEST: CALL MD IMMEDIATELY .
Fire Fighting
Flash Point Method:CC
Flash Point:200F,93C
Lower Limits:0.7%
Upper Limits:6.3%
Extinguishing Media:USE ALCOHOL FOAM, DRY CHEMICAL OR CO2. (WATER MAY
BE INEFFECTIVE).
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT
EQUIPMENT . MOVE CNTNRS FROM FIRE AREA IF IT CAN BE DONE W/O RISK.
USE WATER TO KEEP FIRE-EXPSD CNTNRS COOL.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE CLOTHING. SHUT OFF IGNITION SOURCES; NO FLARES, SMOKING
OR FLAMES IN AREA. WITH CLEAN SHOVEL, CAREFULLY PLACE MATERIAL INTO
CLEAN, DRY CONTAINER AND COV ER; REMOVE FROM AREA. FLUSH SPILL AREA
W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN A COOL, DRY, WELL-VENTILATED FLAMMABLE LIQUID STORAGE AREA OR
CABINET.
Other Precautions:KEEP AWAY FROM HEAT, SPARKS, FLAME. DO NOT GET IN
EYES, ON SKIN, ON CLOTHING. AVOID BREATHING VAPOR. USE WITH ADEQ
VENTILATION.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION IS HIGH, USE AN
APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR OR DUST MASK.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
FUME OR DUST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:UNIFORM, APRON.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:C2
Boiling Pt:B.P. Text:401F,205C
Melt/Freeze Pt:M.P/F.P Text:102F,39C
Vapor Pres:1.1
Spec Gravity:0.84
Evaporation Rate & Reference:>1 (BUTYL ACETATE = 1)
Solubility in Water:APPRECIABLE (>10%)
Appearance and Odor:WHITE TO YELLOWISH CRYSTALS WITH AN AMINE ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, ORGANIC MATERIALS.
Stability Condition to Avoid:HEAT, FLAME, OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:AMMONIA, OXIDES OF NITROGEN.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.