BMWNK - RTV102

  • MSDS: BMWNK
  • Manufacturer: GE SILICONES
  • Product Name: RTV102
  • National Stock Number: 5305-00-012-0503
Product Identification

Product ID:RTV102
MSDS Date:05/03/1991
FSC:5305
NIIN:00-012-0503
MSDS Number: BMWNK

Responsible Party
GE SILICONES
260 HUDSON RIVER ROAD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Cage: GESIL

Contractor
GE SILICONES
WATERFORD, NY 12188 US

Telephone: 518-237-3330

Cage: GESIL

Ingredients

METHYLTRIACETOXYSILANE

CAS: 4253-34-3

RTECS: VV4500000

Fraction By Weight: 1-5%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM


DIMETHYL POLYSILOXANE SILANOL/ST

CAS: 70131-67-8

Fraction By Weight: 60-80%

ACGIH TLV: NA

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEESTION;MAY BE HARMFUL.
SKIN;IRRITATION. INHALATION; RESPIRATORT IRRITATION,IRRITATION OF
MOUTH NOSE AND THROAT. EYES;IRRITATION.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN

First Aid

First Aid:INGESTION;DO NOT INDUCE V OMITING,SLOWLY DILUTE WITH 1-2
GLASSES OF MILK OR WATER AND SEEK MEDICAL ATTENTION. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUNESS PERSON. SKIN;REMOVE
COMPLETELY WITH CLOT H OR PAPER TOWEL, BEFORE WASHING WITH
DETERGENT AND WATER. INHALATION;REMOVE TO FRESH AIR,EYES; FLUSH
WITH PLENTY OF WATER FOR 15 MINUTES AND GET MEDICAL ATTENTION IF
IRRITATION PERSIST.

Fire Fighting

Flash Point:NONE
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:ALL STANDARD PROCEDURES
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE GIVEN

Accidental Release

Spill Release Procedures:WIPE,SCRAPE OR SAOK UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WASH SURFACES WITH DETERHGENT
AND WATER TO REDUCE SLIPPING HAZARD.
Neutralizing Agent:NA

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN
USE.AVOID CONTACT WITH SKIN AND HANDS. REMOVE CONTACT LENS BEFORE
USING SEALANT. DO NOT HANDLE LENS UNTILSEALANTREMO
Other Precautions:RESIDUAL SEALANT MAY REMAIN ON FINGERS AND TERANSFER
TO LENS FOR SEVERAL DAYS. USE IN A WELL VENTILATED AREA.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED IF TVLS ARE EXCEEDED
Ventilation:WELL VENTILATED AREA.
Protective Gloves:CLOTH
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE KNOWN
Work Hygienic Practices:PRUDENT
Supplemental Safety and Health
NA

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:UNK
Vapor Density:UNK
Spec Gravity:1.06
Evaporation Rate & Reference:< 1
Solubility in Water:INSOLUBILE
Appearance and Odor:WHITE PASTE, SLIGHT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,SILICON
DIOXIDE,ACETIC ACID.

Disposal

Waste Disposal Methods:LOCAL,STATE AND FEDERAL REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.