Product ID:RTV102
MSDS Date:06/28/1993
FSC:9320
NIIN:01-075-4814
MSDS Number: BMWYD

GENERAL ELECTRIC CO SILICONE PRODUCTS DIV

HUDSON RIVER RD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: DA POLSINELLI

Cage: 01139

GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT

WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

SILANE, METHYLTRIACETOXY-

CAS: 4253-34-3

RTECS: VV4500000

Fraction By Weight: 1-5%

OSHA PEL NOT ESTABLISHED.

ACGIH TLV: NOT ESTABLISHED.

POLYDIMETHYLSILOXANE

CAS: 9016-00-6

RTECS: TQ2690000

Fraction By Weight: 60-80%

TRADE SECRET COMPONENT

Fraction By Weight: 5-10%

TRADE SECRET COMPONENT

Fraction By Weight: 10-30%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

ACETIC ACID (SARA III) (GIVEN OFF DURING APPLICATION AND

CAS: 64-19-7

RTECS: AF1225000

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM/15 STEL; 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: MAY BE HARMFUL IF SWALLOWED.
SKIN: UNCURED PRODUCT MAY IRRITATE SKIN. INHALE: CAUSES MILD
RESPIRATORY IRRITATION, CAUSES IRRITATION OF THE MOUTH, NOSE AND
THROAT. APPLIES ONLY IN UNCURED STATE . EYE: UNCURED PRODUCT
IRRITATES EYES.
Explanation of Carcinogenicity:THIS PRODUCT OR INGREDIENTS PRESENT .1%
OR MORE IS NOT LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN BY
NTP, IARC, OSHA
Effects of Overexposure:SKIN:UNCURED PRODUCT MAY IRRITATE SKIN.
INHALE:MILD RESPIRATORY IRRITATION, IRRITATION OF THE MOUTH, NOSE
AND THROAT. (APPLIES ONLY IN UNCURED STATE). EYE:UNCURED PRODUCT
IRRITATES EYES.
Medical Cond Aggravated by Exposure:RESPIRATORY

First Aid:INGESTED:RINSE MOUTH WITH WATER SEVERAL TIMES. SKIN:REMOVE
COMPLETELY WITH A DRY CLOTH OR PAPER TOWEL BEFORE WASHING WITH
DETERGENT AND WATER. GET MEDICAL ATTENTION IF IRRITATION PERSISTS.
INHALED:MOV E PERSON TO FRESH AIR. EYE:IMMEDIATELY FLUSH WITH
PLENTY OF WATER FOR AT LEAST 15 MIN & GET MEDICAL ATTENTION IF
IRRITATION PERSISTS.

Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:NONE KNOWN.
Unusual Fire/Explosion Hazard:NO INFORMATION GIVEN BY MFR ON MSDS.

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH
DETERGENT AND WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER
PROTECTIVE EQUIPMENT.
Neutralizing Agent:NO INFORMATION GIVEN BY MFR ON MSDS.

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
AVOID CONTACT WITH SKIN AND EYES. USE ONLY IN A WELL VENTILATED
AREA TO PREVENT IRRITATION BY VAPORS. CAUTION!
Other Precautions:REMOVE CONTACT LENSES BEFORE USING SEALANT. DO NOT
HANDLE LENSES UNTIL ALL SEALANT HAS BEEN CLEANED FROM FINGER
TIPS,NAILS & CUTICLES. RESIDUAL SEALANT MAY REMAIN ON FINGERS FOR
SEVERAL DAYS, TRANSFER TO LENSES & CAUSE SEVERE EYE IRRITATION

Respiratory Protection:USE APPROVED NIOSH RESPIRATORY PROTECTION IF TLV
IS EXCEEDED OR IF OVER EXPOSURE IS LIKELY.
Ventilation:USE ONLY IN WELL VENTILATED AREA. USE MECHANICAL
VENTILATION TO STAY BELOW TLV OF 10 PPM ACETIC ACID.
Protective Gloves:CLOTH GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:EYEWASH STATIONS. USE IN A WELL VENTILATED
AREA.
Work Hygienic Practices:MFR: ? HMIS:USE GOOD INDUSTRIAL HYGIENE
PRACTICE. AVOID UNNECESSARY EXPOSURE. WASH THOROUGHLY BEFORE EATING
OR DRINKING
Supplemental Safety and Health
PRODUCT RELEASED ACETIC ACID DURING APPLICATION AND CURING. UNCURED
PRODUCT CONTACT IRRITATES EYES. UNCURED PRODUCT CONTACT MAY
IRRITATE SKIN.

HCC:N1
NRC/State Lic Num:NONE
Spec Gravity:1.06
Evaporation Rate & Reference:< 1 (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE SOLID, ACETIC ACID ODOR.
Percent Volatiles by Volume:<8

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICON DIOXIDE, ACETIC ACID, FORMALDEHYDE
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS. BURY IN A LICENSED LANDFILL
OR BURN IN AN APPROVED INCINERATOR ACCORDING TO FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.