BMWYN - 1602
- MSDS: BMWYN
- Manufacturer: MINNESOTA MINING AND MFG CO
- Product Name: 1602
- National Stock Number: 8030-01-099-1767
Product Identification
Product ID:1602
MSDS Date:10/24/1989
FSC:8030
NIIN:01-099-1767
MSDS Number: BMWYN
Responsible Party
ST. PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1110
Info Phone: 612-733-1110
Cage: 76381
Contractor
Telephone: 866-556 5712 / 612-733-1110
Cage: 76381
Ingredients
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
MELAMINE/FORMALDEHYDE POLYMER
CAS: 9003-08-1
Fraction By Weight: 11-15%
OSHA PEL NONE
ACGIH TLV: NONE
ISOBUTANE
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: 12-15%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 12-15%
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT; 9192
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 5-10%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 5-10%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 5-10%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 4-8%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 2-5%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
VM&P NAPHTHA (LIGROINE)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 1-3%
OSHA PEL 300 PPM/400 STEL
ACGIH TLV: 300 PPM; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES;IRRITATION, SKIN;IRRITATION, MAY
BE ABSORBED THROUGH SKIN,,PAIN NUMBNESS BURNS,SCALING,CRACKING AND
DRYING. INHALATION;RESPIRATORY IRRITATION AND CNS IMPAIRMENT.
INGESTION;ASPIRATION INTO LUNGS M AY CAUSE LUNG DAMAGE OR DEATH.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE GIVEN
First Aid
First Aid:EYES;FLUSH WITH WATER FOR AT LEAST 10 MINUTES HOLDING EYELIDS
OPEN. SKIN;WASH WITH SOAP AND WATER. INHALATION;REMOVE TO FRESH
AIR, ADMINISTER CPR OR OXYGEN AS NECESSARY,GET MEDICAL ATTENTION.
KEEP PER SON WARM AND QUIET.
Fire Fighting
Flash Point Method:CC
Flash Point:-50F,-46C
Lower Limits:1
Upper Limits:7
Extinguishing Media:CARBON DIOXIDE, FOAM DRUY CHEMICAL
Fire Fighting Procedures:WEAR SCBA
Unusual Fire/Explosion Hazard:OVER HEATED CLOSED CONTAINERS MAY
EXPLODE.
Accidental Release
Spill Release Procedures:OBSERVE PRECAUTIONARY WARNINGS ON CAN.
Neutralizing Agent:NA
Handling
Handling and Storage Precautions:DO NOT PUNCTURE OR INCINERATE OR STORE
ABOVE 120F AVOID PROLONG EXPOSURE TO SUNLIGHT
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID CONTACT WITH
SKIN OR EYES.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA RESPIRATOR IF REQUIRED
Ventilation:LOCAL
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY
Other Protective Equipment:AS REQUIRED TO PROTECT SKIN.
Work Hygienic Practices:PRUDENT
Supplemental Safety and Health
LOCAL
Chemical Properties
HCC:V3
Boiling Pt:B.P. Text:104F,40C
Vapor Pres:ND
Vapor Density:>1
Spec Gravity:1.11
Evaporation Rate & Reference:ND
Solubility in Water:NIL
Appearance and Odor:RED LIQUID AERSOL
Percent Volatiles by Volume:ND
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:OPEN FLAMES, IGNITION SOURCES.
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,
HYDROGEN CHLORIDE AND PHOSGENE
Disposal
Waste Disposal Methods:IN ACCRDANCE WITH LOCAL,STATE AND FEDERAL
REQUIREMENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.