BMXBN - MIL-G-10924F
- MSDS: BMXBN
- Manufacturer: SUMMIT LUBRICANTS INC
- Product Name: MIL-G-10924F
- National Stock Number: 9150-01-197-7689
Product Identification
Product ID:MIL-G-10924F
MSDS Date:10/15/1992
FSC:9150
NIIN:01-197-7689
MSDS Number: BMXBN
Responsible Party
BATAVIA, NY 14021
US
Emergency Phone: 716-344-4301/716-685-1576
Info Phone: 716-344-4301/716-685-1576
Preparer: RONALD KROL
Cage: 0R0E6
Contractor
Telephone: 716-344-4301/716-685-1576
Cage: 0R0E6
Ingredients
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (MILD)
CAS: 64742-54-7
RTECS: PY8035500
Fraction By Weight: 10%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
ADDITIVES AND OTHER INGREDIENTS (THICKENERS)
Fraction By Weight: 90%
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT HAS BEEN USED FOR YEARS
WITH NO KNOWN ILL EFFECTS.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGESTION: DO NOT INDUCE VOMITING. SKIN: FLUSH WITH SOAP AND
WATER. EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
INHALATION: NONE NORMALLY REQUIRED.
Fire Fighting
Flash Point:NON-FLAMMABLE
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, EARTH OR SAND.
Fire Fighting Procedures:WATER MAY CAUSE FROTHING.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:ABSORB WITH SAND OR INERT MATERIAL. SWEEP OR
SCOOP UP AND REMOVE.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:KEEP AWAY FROM SPARKS AND OPEN FLAMES.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:USE WITH ADEQUATE VENTILATION.
Protective Gloves:NEOPRENE
Eye Protection:FACE SHIELD
Other Protective Equipment:NONE
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>700F,>371C
Melt/Freeze Pt:M.P/F.P Text:470F,243C
Spec Gravity:0.88
Solubility in Water:NIL
Appearance and Odor:AMBER SEMISOLID - BLAND
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:OPEN FLAMES.
Hazardous Decomposition Products:OXIDES OF CARBON AND SULFUR.
Disposal
Waste Disposal Methods:INCINERATE. FOLLOW ALL APPLICABLE LOCAL, STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.