BMXCF - P-22

  • MSDS: BMXCF
  • Manufacturer: COLUMBIA CEMENT CO
  • Product Name: P-22
  • National Stock Number: 8040-01-202-1138
Product Identification

Product ID:P-22
MSDS Date:06/11/1991
FSC:8040
NIIN:01-202-1138
MSDS Number: BMXCF

Responsible Party
COLUMBIA CEMENT CO
159 HANSE AVE
FREEPORT, NY 11520
US

Emergency Phone: 800-424-9300

Info Phone: 516-623-6000

Cage: 59479

Contractor
COLUMBIA CEMENT CO INC
FREEPORT, NY 11520-4610 US

Telephone: 516-623-6000

Cage: 59479

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 12.5%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 17.9%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


NAPHTHA, LIGHT ALIPHATIC (PETROLEUM) (THIS MATERIAL

CAS: 64742-89-8

Fraction By Weight: 51.5%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION;NASAL AND RESPIRATORY
IRRITATION,DIZZINESS,WEAKNESS,FATIGUE NAUSEA, HEADACHE,POSSIBLE
UNCONSCIOUNESS AND EVEN ASPHYXIATION.INGESTION;GASTROINTESTINAL
IRRITATION,NAUSEA,VOMITING AND DIARREHA . ASPIRATIONINTO LUNGS CAN
CAUSE CHEMICAL PNEUMONITIS WHIC CAN BE FATAL.
EYES;IRRITATION,REDNESS,TEARING .CONT BELOW
Effects of Overexposure:CONT. FOR ABOVE BLURRED VISION. SKIN; MODERATE
IRRITATION,DEFATTING,DERMITITIS, CAN BE ABSORBED THROUGH THE SKIN.
Medical Cond Aggravated by Exposure:NONE

First Aid

First Aid:INHALATION;REMOVE TO FRESH AIR,ADMINISTER OXYGEN OR CPR AS
REQUIRED,KEEP PERSON WARM AND QUIET GET MEDICAL ATTENTION.
INGESTION;DO NOT INDUCE VOMITING,KEEP WARM,QUIET AND GET MEDICAL
ATTENTION; EYES;F LUSH WITH WATER FOR 15MINUTES LIFTING UPPER AND
LOWER LIDS OCCASIONALY. SKIN;THROUGHLY WASH EXPOSED AREA WITH SOAP
AND WATER REMOVE CONTAMINATED CLOTHING, LAUNDER BEFORE REUSE.

Fire Fighting

Flash Point Method:TOC
Flash Point:>20F,>-7C
Lower Limits:1.1
Upper Limits:10.0
Extinguishing Media:USE FOAM,CARBON DIOXIDE OR DRY CHEMICAL
Fire Fighting Procedures:SCBA,WATEER MAY BE SUITABLE TO COOL FIRE
EXPOSE CONTAINERS, AVOID SPREADING FIRE WITH WATER.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR AND MAY
TRAVEL LONG DISTANCES ALONG THE GROUND TO IGNITION SOURCES AND
FLASH BACK.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES, KEEP PEOPLE
AWAY,RECOVER FREE LIQUID,ADD ABSORBENT TO SPILL AREA, AVOID
BREATHING VAPORS, KEEP PETROLEUM PRODUCTS OUT OF SEWERS AND
WATERWAYS.
Neutralizing Agent:NA

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT STORE NEAR HEAT,SPARKS FLAME OR STRONG OXIDANTS. AVOID
BREATHING VAPORS.PROVIDE ADEQUATE VENTILATION.
Other Precautions:EMPTY CONTAINER MAY BE HAZARDOUS. NEVER USE WELDING
OR CUTTING TORCH ON EMPTY CONTAINERS. OBSERVE ALL HAZARD WARNINGS
GIVEN IN MSDS.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED HYDROCARBON CANNISTER OR
SUPPLIED AIR RESPIRATOR IN CONFINED AREA.
Ventilation:SUFFICENT TO MAINYTAIN LEVELS BELOW TVL.
Protective Gloves:CHEMICAL GLOVES
Eye Protection:SPLASH GOGGLES OR FACE SHIED.
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING IF REQUIRED TO
PREVENT REPEATED OR PROLONGED SKIN CONTACT
Work Hygienic Practices:PRUDENT
Supplemental Safety and Health
NA

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:176F,80C
Vapor Pres:51
Vapor Density:3.0
Spec Gravity:0.85
Evaporation Rate & Reference:UNK
Solubility in Water:UNK
Appearance and Odor:YELLOW TAN SYRUP COLOR, PETROLEUM ODOR.
Percent Volatiles by Volume:82

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS,STRONG ALKALIES, OR STRONG ACIDS OR BASES.
Stability Condition to Avoid:NA
Hazardous Decomposition Products:FUMES, SMOKE,CARBON MONOXIDE,CARBON
DIOXIDE IN THE CASE OF INCOMPLETE COMBUSTION IN AIR.

Disposal

Waste Disposal Methods:SMALL SPILLS ALLOW VOLATILE PORTION TO EVAPORATE
IN WELL VENTILATED AREA.REMAINING MATERIAL IN ACCORDANCE WITH
APPLICABLE REGULATIONS. LARGE SPILL,DISPOSE OF IN ACCORDANCE WITH
LOCAL STATE OR FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.