Product ID:DPU166, HIGH SOLIDS PRIMER
MSDS Date:04/24/1989
FSC:8010
NIIN:00N028450
MSDS Number: BMXXV

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: 20696

PPG INDUSTRIES INC

ALLISON PARK, PA 15101 US

Telephone: 412-492-5555; 800-441-9695

Cage: 20696

CHROMIUM COMPOUNDS

Fraction By Weight: 5-10%

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.05 MG/M3

CHROMIUM COMPOUNDS (SLIGHTLY SOLUBLE)

Fraction By Weight: 2-5%

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.05 MG/M3

OF AIRBORNE CONTAMINANTS AGAINST WHICH

RTECS: 9999999ZZ

EXPLO HAZ DATA BELOW STATED LIMIT, & TO REMOVE DECOMP

RTECS: 9999999ZZ

OR LATEX RUBBER.

RTECS: 9999999ZZ

BARIUM COMPOUNDS

Fraction By Weight: 25-30%

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 20-25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

10 MG/M3 TDUST; 5 MG/M3 RDUST.

CAS: 7727-43-7

RTECS: CR0600000

Fraction By Weight: 25-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

STRONTIUM CHROMATE (SARA III)

CAS: 7789-06-2

RTECS: GB3240000

Fraction By Weight: 5-10%

OSHA PEL 0.1 PPM CRO3;CEILING

ACGIH TLV: 0.0005MG CR/M3;A2;93

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

(ORAL,RAT) 1.67

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA III). LD50

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 2-5%

OSHA PEL 200 PPM;300 PPM STEL

ACGIH TLV: 200 PPM;300 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

2-PENTANONE, 4-METHYL-; (METHYL ISOBUTYL KETONE) (SARA

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 1-2%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 25-30%

INGREDS 9, 10 & 11 ARE COMPONENTS OF ONE/MORE OF ABOVE

RTECS: 9999999ZZ

LD50 LC50 Mixture:SEE INGREDIENT 4, 5 & 6.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) INGEST: HARMFUL/FATAL IF
SWALLOWED. EYE:CAUSES SEV EYE IRRIT.SKIN: CAUSES PRIMARY SKIN
IRRIT. PRLNGD/RPTD CONT MAY CAUSE AN ALLERGIC SKIN RXN.INHAL: VAP &
SPRAY MIST HARMFUL IF INHALED. VAP IR RIT EYES,NOSE, & THROAT.
SANDING & GRINDING DUSTS MAY BE HARMFUL IF INHALED. RPTD EXPOS TO
HIGH VAP MAY CAUSE(SUPP DATA)
Explanation of Carcinogenicity:STRONTIUM CHROMATE: GROUP 1 (IARC);
GROUP 1 (NTP).
Effects of Overexposure:EYE WATERING, HDCHS, NAUSEA, DIZZINESS, AND
LOSS OF COORDINATION ARE INDICATIONS THAT SOLV LEVELS ARE TOO HIGH.
REDNESS, ITCHING, BURNING SENSATION AND VISUAL DISTURBANCES MAY
INDICATE EXCESSIVE EYE C ONTACT. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, AND SWELLING ARE CONDITIONS ASSOCIATED WITH
EXCESSIVE SKIN CONT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH EYES IMMED W/PLENTY
OF H*2O FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & H*2O. INHAL: REMOVE TO FRESH AIR.
APPLY ARTF R ESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF ANY
OF FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD, CONT POIS CNTRL
CNTR, EMER ROOM/PHYS IMMEDIATELY; HAVE MSDS INFORMATION AVAILABLE.

Flash Point Method:PMCC
Flash Point:50.0F,10.0C
Lower Limits:1.7%
Extinguishing Media:USE NFPA CLASS B EXTING (CO*2, DRY CHEM/UNIVERSAL
AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS (SUPP
DATA)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.H*2O SPRAY MAY BE INEFT. H*2O SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS(SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS, & OPEN FLAMES. CLSD CNTNRS MAY EXPLO WHEN
EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT(SUPP DATA)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERSONNEL EQUIPPED WITH
PROPER RESP AND SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE
ALL SOURCES OF IGNITION. TAKE UP SPILLED MATERIAL WITH SAWDUST,
VERMICULITE, OR OTHER ABSORB MATL & PLACE INTO CNTNRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QTYS IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA CLASS
IB FLAMMABLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS
RESULTING MIX MAY HAVE HAZ OF ALL PARTS. CNTNRS SHOULD BE GROUNDED
WHEN POURING. AVOID FR EE FALL OF LIQ IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
CNTRLS,VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD(TC-23C) PAINT
SPRAY/AIR SUPP (TC-19C)RESP MAY ALSO REDUCE EXPOS. READ RESP MFR'S
INSTRUCTIONS & LITERA TURE CAREFULLY TO DETERM TYPE (ING 12)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGREDS BELOW LOWEST PELS & LEL IN FIRE & (ING 13)
Protective Gloves:POLYVINYL ALCOHOL, NEOPRENE RUB,(ING 14)
Eye Protection:CHEM WORK GOG & FULL LGTH FACESHLD
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRONG CONSTRUCTED OF: POLYVINYL ALCOHOL, NEOPRENE
RUBBER, OR LATEX RUB.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA:IB FLAM LIQ FIRES. FIRE FIGHT PROC: AUTOIGNIT/EXPLO WHEN
EXPOS TO EXTREME HEAT. IF H*2O USED, FOG NOZ PREFERABLE. EXPLO HAZ:
SURFS. TOX GASES MAY FORM WHEN PROD IS CONTACTED BY FLAME/HOT
SURFS. HAZ DECOMP PRODS: FUMES INCL: CO, OXIDES OF CHROMIUM. HLTH
HAZ: RESP TRACT IRRIT & PERM BRAIN & NERVOUS SYS DMG.

HCC:F3
Boiling Pt:B.P. Text:172F,78C
Vapor Pres:31.4
Vapor Density:HVR/AIR
Spec Gravity:1.94
Evaporation Rate & Reference:270 (BUTYL ACETATE=100)
Solubility in Water:1.3%
Appearance and Odor:VISCOUS LIQ WITH AN ODOR CHARACTERISTIC OF SOLV
LISTED IN INGREDIENTS SECTION.
Percent Volatiles by Volume:36.8

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING OR FLAME-CUTTING ON SURFS COATED W/PROD
MAY PRDCE (SUPP DATA)

Waste Disposal Methods:WASTE MATL MUST BE DISP OF I/A/W FEDERAL, STATE,
PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS. EMPTY
CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED
WASTE MANAGEMENT FACILI TY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.