BMXYZ - S5643, SULFANILIC ACID ANHYDROUS ACS REAGEN

  • MSDS: BMXYZ
  • Manufacturer: SIGMA CHEMICAL CO
  • Product Name: S5643, SULFANILIC ACID ANHYDROUS ACS REAGEN
  • National Stock Number: 6810-00N028480
Product Identification

Product ID:S5643, SULFANILIC ACID ANHYDROUS ACS REAGEN
MSDS Date:01/27/1992
FSC:6810
NIIN:00N028480
MSDS Number: BMXYZ

Responsible Party
SIGMA CHEMICAL CO
SAINT LOUIS, MO 63178
US

Emergency Phone: 314-771-5765

Info Phone: 800-325-3010

Cage: 0DK69

Contractor
SIGMA CHEMICAL CO SIGMA DIAGNOSTICS DIV
ST LOUIS, MO 63103-2530 US

Telephone: 314-771-5765

Cage: 0DK69

Ingredients

SULFANILIC ACID; (SULFANILIC ACID ANHYDROUS ACS REAGENT)

CAS: 121-57-3

RTECS: WP3895500

Hazards

LD50 LC50 Mixture:LD50: (ORAL, RAT) 12300 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY BE HARMFUL BY INHALATION,
INGESTION, OR SKIN ABSORPTION. CAUSES EYE & SKIN IRRITATION.
MATERIAL IS IRRITATING TO MUCOUS MEMBRANES AND UPPER RESPIRATORY
TRACT. TO THE BEST OF OUR KNOWLEDGE, THE CHEMICAL, PHYSICAL, AND
TOXICOLOGICAL PROPERTIES HAVE NOT BEEN THOROUGHLY INVESTIGATED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. SKIN: IMMEDIATELY WASH WITH SOAP AND COPIOUS AMOUNTS OF
WATER. WASH CONTAMINATED CLOTHING BEFORE REUSE. INHAL: REMOVE TO
FRESH AIR. I F NOT BREATHING GIVE ARTIFICIAL RESPIRATION. IF
BREATHING IS DIFFICULT, GIVE OXYGEN. INGEST: WASH OUT MOUTH WITH
WATER PROVIDED PERSON IS CONSCIOUS. CALL MD.

Fire Fighting

Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER OR
APPROPRIATE FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . PREVENT CONTACT WITH SKIN AND EYES.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

Accidental Release

Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SCBA, RUBBER BOOTS
AND HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG AND HOLD FOR
WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA AND WASH SPILL
SITE AFTER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY PLACE. KEEP
TIGHTLY CLOSED.
Other Precautions:AVOID CONTACT AND INHALATION. DO NOT GET IN EYES, OR
SKIN, ON CLOTHING. IRRITANT.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEM WORK GOG & FULL LGTH FSHLD .
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. WEAR SUITABLE
PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Appearance and Odor:GREY POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG BASES, STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF: CARBON MONOXIDE,
CARBON DIOXIDE, NITROGEN OXIDES, SULFUR OXIDES.

Disposal

Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER. DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.