BMXZT - 03958, CURITHANE 116 POLYAMINE HARDENER
- MSDS: BMXZT
- Manufacturer: DOW CHEMICAL U S A
- Product Name: 03958, CURITHANE 116 POLYAMINE HARDENER
- National Stock Number: 8040-00N028499
Product Identification
Product ID:03958, CURITHANE 116 POLYAMINE HARDENER
MSDS Date:06/14/1990
FSC:8040
NIIN:00N028499
MSDS Number: BMXZT
Responsible Party
MIDLAND, MI 48674
US
Emergency Phone: 517-636-4400
Info Phone: 517-636-4400
Cage: 96717
Contractor
Telephone: 800-258-2436
Cage: 96717
Ingredients
ANALINE, 2',4-METHYLENEDI-; (2,4' METHYLENEDIANILINE)
CAS: 1208-52-2
RTECS: BY5400000
Fraction By Weight: 7%
EXCESSIVE
RTECS: 9999999ZZ
BLOOD'S ABILITY TO TRANSPORT O*2. IN MAN, EXCESSIVE
RTECS: 9999999ZZ
COMPONENT, HAS CAUSED LIVER EFTS; IN ANIMALS, IT HAS
RTECS: 9999999ZZ
& EYE EFTS. MIX CONTAINS A COMPONENT WHICH IS LISTED
RTECS: 9999999ZZ
PURPOSES UNDER OSHA STANDARD 29 CFR 1910.1200. BY THE
RTECS: 9999999ZZ
THE PRIMARY COMPONENT, HAS BEEN SHOWN TO CAUSE CANCER
RTECS: 9999999ZZ
MUTAGENICITY TESTS ON METHYLENE DIANILINE, A
RTECS: 9999999ZZ
PATIENT. METHEMOGLOBINEMIA MAY AGGRAVATE ANY
RTECS: 9999999ZZ
AVAILABLE O*2, SUCH AS CHRONIC LUNG DISEASE,
RTECS: 9999999ZZ
A DISTINCT HAZARD & THEREFORE SHOULD BE
RTECS: 9999999ZZ
IMPERVIOUS TO THIS MATL. SELECTION OF
RTECS: 9999999ZZ
SUIT WILL DEPEND OF OPERATION.
RTECS: 9999999ZZ
POLYMETHYLENE POLYPHENYL AMINE; (POLYMERIC
CAS: 25214-70-4
Fraction By Weight: 30%
ANALINE, 4,4'-METHYLENEDI-; (4,4'-METHYLENEDIANILINE)
CAS: 101-77-9
RTECS: BY5425000
Fraction By Weight: 63%
ACGIH TLV: 0.1 PPM, S
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:LD50: (ORAL, RAT) >830 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY CAUSE SLIGHT TRANSIENT
(TEMPORARY) IRRIT. VAPS MAY IRRITATE EYES. MATL IS SOMETIMES
ENCOUNTERED AT ELEVATED TEMPS; MORE INTENSE EFTS AS WELL AS THERMAL
BURNS ARE POSS. SKIN CONT:PRLNGD/RPTD EX POS MAY CAUSE IRRIT.MATL
ADHERES TO SKIN & MAY BE DIFFICULT TO REMOVE. MATL HANDLED AT
ELEVATED TEMPS, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:METHYLENE DIANILINE (4,4): GROUP 2
(NTP), GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ:THERMAL BURNS ARE POSS. MAY CAUSE
ALLERGIC SKIN REACTION IN SUSCEPTIBLE INDIVIDUALS. SKIN ABORP:RPTD
SKIN EXPOS MAY RESULT IN ABSORP OF HARMFUL AMTS. INGEST: SINGLE
DOSE ORAL TOXICITY IS BELI EVED TO BE LOW TO MOD. AMTS INGESTED
INCIDENTAL TO INDUST HANDLING ARE NOT LIKELY TO CAUSE INJURY;
HOWEVER, (SUPP DATA)
Medical Cond Aggravated by Exposure:RPTD EXCESSIVE EXPOS MAY AGGRAVATE
PREEXISTING LIVER & KIDNEY DISEASES. METHEMOGLOBINEMIA MAY
AGGRAVATE ANY PREEXISTING CONDITION SENSITIVE TO A DECREASE IN
AVAIL O*2, SUCH AS CHRONIC LUNG (ING 15)
First Aid
First Aid:EYE:IRRIGATE IMMED W/WATER FOR AT LEAST 15 MIN. SKIN: WASH
OFF IN FLOWING WATER/SHOWER. INGEST:INDUCE VOMIT IF LG MATS ARE
INGESTED. CONSULT MD PERS. INHAL: REMOVE TO FRESH AIR IF EFTS
OCCUR. CONSULT MD. NOTE TO MD:RPTD EXCESSIVE EXPOS MAYAGGRAVATE
PREEXISTING LIVER & KIDNEY DISEASE. NO SPECIFIC ANTIDOTE.
SUPPORTIVE CARE. TREATMENT BASED ON JUDGEMENT OF MD IN RESPONSE TO
REACTIONS OF (ING 11)
Fire Fighting
Flash Point Method:PMCC
Flash Point:460F,238C
Extinguishing Media:WATER FOG, FOAM, ALCOHOL FOAM, CO*2, AND DRY
CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:ONLY PROPERLY PROTECTED PERS SHOULD REMAIN IN
IMMED AREA. SOAK UP IN NON-COMBUST ABSORB MATL & ALLOW TO HARDEN.
RESIDUAL AMINE MAY BE REMOVED BY STEAM/HOT SOAPY WATER. DO NOT
SEWER. USE OF METHYLENE C HLORIDE/OTHER SOLVS IN CLEAN UP POSES
(ING 13)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE IN A
COOL, DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:ATMOSPHERIC LEVELS SHOULD BE MAINTAINED BELOW
EXPOSURE GUIDELINE. WHEN RESP PROT IS REQD FOR CERTAIN OPERATIONS,
USE A NIOSH/MSHA APPROVED AIR-PURIFYING RESPIRATOR. IN DUSTY
ATMOSPHERES, USE A NIOSH/M SHA APPROVED DUST RESPIRATOR.
Ventilation:PROVIDE GEN AND/OR LOCAL EXHAUST VENT TO CONTROL AIRBORNE
LEVELS BELOW EXPOSURE GUIDELINES.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG & FULL LGTH FSHLD .
Other Protective Equipment:WEAR CLEAN, LONG-SLEEVED, BODY-COVERING
CLTHG. WHEN PRLNGD/FREQUENTLY RPTD CONT COULD OCCUR, USE PROT CLTHG
(ING 14)
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING IMMEDIATELY, WASH
SKIN AREA WITH SOAP AND WATER, AND LAUNDER CLOTHING BEFORE REUSE.
Supplemental Safety and Health
HLTH HAZ:INGEST OF LARGER AMTS COULD CAUSE SERIOUS INJURY, EVEN DEATH.
INHAL: AT ROOM TEMP, EXPOS TO VAPS ARE UNLIKELY DUE TO PHYSICAL
PROPERTIES; HIGHER TEMPS MAY GENERATE VAP LEVELS SUFFICIENT TO CA
USE ADVERSE EFTS. MAY CAUSE RESP SENSITIN SUSCEPTIBLE INDIVIDUALS.
EXCESSIVE EXPOS MAY CAUSE IRRIT TO UPPER (ING 4)
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:748F,398C
Vapor Pres:1 @ 197C
Spec Gravity:1.2 @ 25/20C
Solubility in Water:SLIGHT
Appearance and Odor:TAN SOLID; FAINT AMINE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS, STRONG ACIDS.
Stability Condition to Avoid:STABLE AT ROOM TEMPERATURE. AVOID
PROLONGED HEATING OVER 100C.
Hazardous Decomposition Products:ANILINE, NITROGEN OXIDES.
Disposal
Waste Disposal Methods:INCINERATE WITH FUEL USING EXHAUST CONTROL TO
ASSURE COMPLETE COMBUSTION I/A/W LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.