BMYGH - P351, LANTHANUM OXIDE

  • MSDS: BMYGH
  • Manufacturer: J T BAKER INC
  • Product Name: P351, LANTHANUM OXIDE
  • National Stock Number: 6810-00N028671
Product Identification

Product ID:P351, LANTHANUM OXIDE
MSDS Date:05/02/1986
FSC:6810
NIIN:00N028671
MSDS Number: BMYGH

Responsible Party
J T BAKER INC
222 RED SCHOOL LANE
PHILLIPSBURG, NJ 08865-2219
US

Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)

Info Phone: 800-582-2537

Cage: DO803

Contractor
MALLINCKRODT BAKER, INC.
PHILLIPSBURG, NJ 08865 US

Telephone: 800-582-2537

Cage: 70829

Ingredients

LANTHANUM OXIDE

CAS: 1312-81-8

Fraction By Weight: 98-100%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION OF LARGE QUANTITIES MAY
CAUSE LIVER DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGESTION: IF PERSON IS CONSCIOUS, IMMEDIATELY GIVE LARGE
AMOUNTS OF WATER. GET MEDICAL ATTENTION. INHALATION: MOVE EXPOSED
PERSON TO FRESH AIR. GET MEDICAL ATTENTION. EYE: IMMEDIATELY FLUSH
WITH PLEN TY OF WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
ATTENTION. SKIN: IMMEDIATELY WASH WITH PLENTY OF SOAP AND WATER FOR
AT LEAST 15 MINUTES.

Fire Fighting

Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. CAREFULLY
SWEEP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION IS HIGH, USE A
NIOSH/MSHA APPROVED RESPIRATOR OR DUST MASK.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
FUME OR DUST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:DURING USE AVOID CONTACT WITH EYES, SKIN,
CLOTHING. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:7592F,4200C
Melt/Freeze Pt:M.P/F.P Text:4199F,2315C
Spec Gravity:6.51
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE TO OFF-WHITE AMORPHOUS POWDER.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE, AND LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.