BMYHL - 9256, BENZENE
- MSDS: BMYHL
- Manufacturer: J T BAKER INC
- Product Name: 9256, BENZENE
- National Stock Number: 6810-00N028705
Product Identification
Product ID:9256, BENZENE
MSDS Date:07/30/1986
FSC:6810
NIIN:00N028705
MSDS Number: BMYHL
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
BENZENE
CAS: 71-43-2
RTECS: CY1400000
Fraction By Weight: 90-100%
OSHA PEL 10 PPM;25 PPM, C
ACGIH TLV: 10 PPM
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT) 4894 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHALATION OF VAPORS MAY CAUSE
HEADACHE, NAUSEA, DIZZINESS, FATIGUE AND WEAKNESS IN ARMS AND LEGS.
CHRONIC EFFECTS OF OVEREXPOSURE MAY INCLUDE KIDNEY AND/OR LIVER
DAMAGE. IRREVERSIBLE INJURY TO BLOOD FORMING TISSUE MAY RESULT
FROM CHRONIC LOW LEVEL EXPOSURE. INHALATION OF BENZENE MAY CAUSE
APLASTIC ANEMIA.
Explanation of Carcinogenicity:BENZENE: GROUP 1 (NTP), (IARC); OSHA
REGULATED.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:INGEST: DO NOT INDUCE VOMITING; IF CONSCIOUS, GIVE WATER,
MILK, OR MILK OF MAGNESIA. INHAL: REMOVE TO FRESH AIR. IF NOT
BREATHING, GIVE ARTF RESP. IF BREATHING IS DIFFICULT, GIVE OXYGEN.
EYES/SKIN: IM MEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES.
Fire Fighting
Flash Point Method:CC
Flash Point:12F,-11C
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:USE ALCOHOL FOAM, DRY CHEMICAL OR CO2. (WATER MAY
BE INEFFECTIVE).
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD POSITIVE PRESS SCBA &
FULL PROT EQUIP .MOVE CNTNRS FROM FIRE AREA IF CAN BE DONE W/O
RISK. USE WATER TO KEEP FIRE-EXPSD CNTNRS COOL
Unusual Fire/Explosion Hazard:VAPS MAY FLOW ALONG SURF TO DISTANT IGNIT
SOURCES AND FLASH BACK. CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE. CONTACT WITH STRONG OXIDIZERS MAY CAUSE FIRE.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
CLTHG.SHUT OFF IGNIT SOURCES;NO FLARES/SMOKING/FLAMES IN AREA.STOP
LEAK IF CAN W/O RISK.USE WATER SPRAY TO REDUCE VAPS.TAKE UP
W/SAND/OTHER NON- COMBUST ABSORB MATL & PLACE IN CNTNR FOR LATER
DISP. (SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN A COOL, DRY, WELL-VENTILATED, FLAMMABLE LIQUID STORAGE AREA OR
CABINET.
Other Precautions:KEEP AWAY FROM HEAT, SPARKS, FLAME. AVOID CONTACT
WITH EYES, SKIN, CLOTHING. AVOID BREATHING VAPOR. USE WITH ADEQUATE
VENTILATION.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION
REQUIRED IF AIRBORNE CONCENTRATION EXCEEDS TLV. AT CONCENTRATIONS
ABOVE 10 PPM, A NIOSH/MSHA APPROVED SCBA IS ADVISED.
Ventilation:USE GENERAL OR LOCAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD
Other Protective Equipment:UNIFORM, PROTECTIVE SUIT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
SPILL PROC: FLUSH AREA WITH WATER. J. T. BAKER SOLUSORB SOLVENT
ABSORBENT IS RECOMMENDED FOR SPILLS OF THIS PRODUCT.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:176F,80C
Melt/Freeze Pt:M.P/F.P Text:43.0F,6.1C
Vapor Pres:74.6
Vapor Density:2.8
Spec Gravity:0.88 (H2O=1)
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:CLEAR, COLORLESS LIQUID HAVING CHARACTERISTIC
AROMATIC ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, SULFURIC ACID, NITRIC ACID.
Stability Condition to Avoid:HEAT, FLAME, SOURCES OF IGNITION.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS. EPA HAZARDOUS
WASTE NUMBER: U019 (TOXIC WASTE).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.