BMZCQ - 4248, ZINC

  • MSDS: BMZCQ
  • Manufacturer: J T BAKER INC
  • Product Name: 4248, ZINC
  • National Stock Number: 6810-00-264-7868
Product Identification

Product ID:4248, ZINC
MSDS Date:09/08/1987
FSC:6810
NIIN:00-264-7868
MSDS Number: BMZCQ

Responsible Party
J T BAKER INC
222 RED SCHOOL LANE
PHILLIPSBURG, NJ 08865-2219
US

Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)

Info Phone: 800-582-2537

Cage: DO803

Contractor
MALLINCKRODT BAKER, INC.
PHILLIPSBURG, NJ 08865 US

Telephone: 800-582-2537

Cage: 70829

Ingredients

ZINC. PEL/TLV AS ZINC OXIDE.

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 90-100%

OSHA PEL 10MG/M3 TDUST;5 FUME

ACGIH TLV: 10MG/M3 TDUST;5 FUME

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL OF DUST MAY CAUSE IRRIT TO UPPER
RESP TRACT. INHAL OF FUMES MAY CAUSE HDCH, NAUS, VOMIT, DIARR,
CHILLS, FEVER & ACHING MUSCLES. PRLNG SKIN CONT MAY CAUSE DERM.
INGEST MAY CAUSE NAUS, VOMIT, HDCH S, DIZZ, GI IRRIT. NOTE:PROD IS
SOLID MASS; HOWEVER, WARNINGS ARE BASED ON INHAL OF DUST, MIST/FUME
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:EMISSIONS THAT ARE POSS DURING
MFG/CHEM RXNS.
Medical Cond Aggravated by Exposure:RESPIRATORY SYSTEM DISEASE,
GASTROINTESTINAL DISORDERS.

First Aid

First Aid:INGEST:IF SWALLOWED & PERS IS CONSCIOUS, IMMED GIVE LG AMTS
OF H*2O. GET MD. INHAL:IF PERS BREATHES IN LG AMTS, MOVE EXPOSED
PERS TO FRESH AIR. GET MD. EYE:IMMED FLUSH W/PLENTY OF H*2O FOR @
LST 15 MI NS. GET MD. SKIN:IMMED WASH W/PLENTY OFSOAP & H*2O FOR @
LST 15 MINS.

Fire Fighting

Extinguishing Media:USE EXTING MEDIA APPROP FOR SURROUNDING FIRE.
WARNING - APPLICATION OF WATER TO HOT METAL MAY GENERATE STEAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DUST MAY FORM EXPLO MIXT W/AIR. REACTS
W/MOST ACIDS TO PRODUCE HYDROGEN GAS, WHICH CAN FORM EXPLOSIVE
MIXTURE W/AIR. TOX GASES PRDCED:ZINC FUMES, HYDROGEN GAS.

Accidental Release

Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. CAREFULLY
SWEEP UP & REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE AREA. ISOLATE FROM
INCOMPATIBLE MATERIALS.
Other Precautions:DURING USE AVOID CONTACT W/EYES, SKIN, CLOTHING.

Exposure Controls

Respiratory Protection:NONE REQD WHERE ADEQ VENT CONDITIONS EXIST. IF
AIRBORNE CONCENTRATION IS HIGH, USE APPROPRIATE NIOSH/MSHA APPROVED
RESPIRATOR OR DUST MASK.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
FUME OR DUST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:R2
Boiling Pt:B.P. Text:1665F,907C
Melt/Freeze Pt:M.P/F.P Text:786F,419C
Spec Gravity:7.14 (H*2O=1)
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:BLUISH-WHITE METALLIC SOLID W/NO ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:NO
STRONG ACIDS, STRONG BASES, STRONG OXIDIZING AGENTS, WATER, HALOGENATED
HYDROCARBONS.
Stability Condition to Avoid:MOISTURE, DUSTING.
Hazardous Decomposition Products:OXIDES OF ZINC, HYDROGEN.

Disposal

Waste Disposal Methods:DISPOSE I/A/W ALL APPLICABLE FEDERAL, STATE &
LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.