BMZDM - SOLDER SN 62

Product Identification

Product ID:SOLDER SN 62
MSDS Date:02/05/1988
FSC:3439
NIIN:00-402-0967
MSDS Number: BMZDM

Responsible Party
KESTER SOLDER DIV, LITTON SYSTEMS INC
515 EAST TOUHY AVE
DES PLAINES, IL 60018-2675
US

Emergency Phone: 708-297-1600

Info Phone: 312-699-5594

Cage: 75297

Contractor
KESTER SOLDER DIVISION OF LITTON SYSTEMS, INC.
DES PLAINES, IL 60018 US

Telephone: 847-297-1600

Cage: 75297

Ingredients

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 62%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192


LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 32.65%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 0.35%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


BISMUTH

CAS: 7440-69-9

RTECS: EB2600000


CADMIUM

CAS: 10043-52-4

RTECS: EV9800000

OSHA PEL SEE 1910.1027

ACGIH TLV: 0.01 MG/M3 DUST;9394


SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 2.0%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE:SWEETISH METALLIC TASTE, BURNING
IN THE MOUTH, SEVERE THIRST, VOMITING, DIARRHEA. IF MOLTEN, CAN
BURN EYES AND SKIN. CHRONIC:ANOREXIA,"LEAD LINE" ON GUM MARGIN,
NAUSEA, SEVERE ABDOMINAL PAIN, VI SUAL DISTURBANCES, PARALYSIS.
Explanation of Carcinogenicity:CADIUM IS LISTED AS A SUSPECT
CARCINOGEN.
Effects of Overexposure:SYMPTOMS FROM INGESTION & INHALATION INCLUDE
NAUSEA,HEADACHE,ABDOMINAL DISCOMFORT,METALLIC TASTE,JOINT & MUSCLE
PAINS. THESE MAY BE ACCOMPANIED BY PALLOR,PYORRHEA,LEAD LINE ON
GUMS AND WEIGHT LOSS.
Medical Cond Aggravated by Exposure:RESPIRATORY OR ALLERGIC CONDITIONS.

First Aid

First Aid:INHALATION:REMOVE TO FRESH AIR, PROVIDE CPR/OXYGEN IF NEEDED.
EYE CONTACT:FLUSH WITH WATER FOR 15 MINUTES. SKIN CONTACT:WASH WITH
SOAP AND WATER. GET MED ATTENTION IF SYMPTOMS PERSIST.
INGESTION:GET M EDICAL HELP IMMEDIATELY.

Fire Fighting

Flash Point:NONE
Extinguishing Media:ANY MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SCBA. SOLDER ALLOYS CONTAINING A
SUBSTANTIAL AMOUNT OF CADMIUM MAY EMIT TOXIC FUMES IN A FIRE.
Unusual Fire/Explosion Hazard:FLUX IN CORED SOLDER WIRE MAY BURN IF
SOLDERING IS DONE WITH A FLAME.

Accidental Release

Spill Release Procedures:CLEAN UP ANY GRINDING DUST & WASTE RESIDUE &
PLACE IN SUITABLE DISPOSAL CONTAINER.

Handling

Handling and Storage Precautions:NONE
Other Precautions:USE OF STRONG ACID FLUXES MAY RESULT IN THE EMISSION
OF TOXIC LEAD CHLORIDE FUMES DURING SOLDERING. ALLOYS CONTAINING
CADMIUM MAY EMIT CADMIUM FUMES DURING SOLDERING.

Exposure Controls

Respiratory Protection:METAL FUME & DUST TYPE RESPIRATOR IF TLV IS
EXCEEDED.
Ventilation:LOCAL EXHAUST PREFERABLE. MECHANICAL (GENERAL) ACCEPTABLE.
Protective Gloves:SOLDERING GLOVES
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:LONG SLEEVE WORK CLOTHES.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>2170F,>118
Spec Gravity:>7
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY METALLIC BAR, WIRE, OR RIBBON, NO ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, ALKALIS AND OXIDIZERS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:TOXIC FUMES OF METALS, METAL OXIDES.

Disposal

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS. EXCESS SOLDER CAN BE SOLD TO METAL RECLAIMER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.