Product ID:92291A,P170 TONER CARTRIDGE FOR HP LASERJET
MSDS Date:11/15/1990
FSC:6850
NIIN:01-343-6998
MSDS Number: BNBXN

CANON INC

30 2 SHIMOMARUKO 3 CHOME
OHTA KU TOKYO
JA

Emergency Phone: 03-758-2111

Info Phone: 03-758-2111

Cage: S4546

HEWLETT PACKARD CO

TOKYO US

Telephone: 208-323-2987

Cage: 54546

STYRENE ACRYLATE COPOLYMER

Fraction By Weight: 45-55%

IRON (III) OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 45-55%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

SILICA GEL; (AMORPHOUS SILICA)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 0.5-2%

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: TONER POWDER IS NOT ACCESSIBLE,
UNTIL THE CARTRIDGE IS FORCED TO BE BROKEN. INHAL: TONER IS FINELY
DIVIDED SOLID. DO NOT BREATHE DUST. EYES: NO SPECIFIC HAZ IS KNOWN
TO CANON. HOWEVER, ANY MATL THAT CONTACTS THE EYE MAY BE IRRIT.
SKIN: LOW HAZARD FOR INDUSTRIAL HANDLING. CHRONIC: NO DATA
AVAILABLE.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH PLENTY OF WATER. SKIN: WASH WITH SOAP AND
WATER.

Extinguishing Media:CO*2, WATER, DRY CHEMICALS.
Fire Fighting Procedures:NONE.
Unusual Fire/Explosion Hazard:THIS MATERIAL, LIKE MOST ORGANIC MATERIAL
IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.
NON-FLAMMABLE SOLID.

Spill Release Procedures:NO TONER SPILLAGE OCCURS IN NORMAL OPERATION
OR HANDLING. IF IT SHOULD OCCUR, AVOID INHALATION OF DUST. SWEEP
MATERIAL ONTO PAPER OR COLLECT IT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
AWAY FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE REQUIRED.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED.
Eye Protection:NONE REQUIRED.
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:V7
Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4-1.6(H*2O=1)
Evaporation Rate & Reference:NEGLIGIBLE (BUAC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS FINE POWDER, WITH SLIGHT PLASTIC ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMBUSTION WILL PRODUCE CO*2 &
POSSIBLE TOXIC CHEMICALS SUCH AS CO.

Waste Disposal Methods:THIS PRODUCT IS CONSTRUCTED FROM PLASTICS &
METALS. THE WASTE TONER COULD BE CONSIDERED AS PLASTIC WASTE.
DISPOSAL SHOULD BE SUBJECT TO FEDERAL, STATE OR LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.