BNCTH - FULL SET PLUS MULTIPURPOSE THINSET MORTAR (
- MSDS: BNCTH
- Manufacturer: H B FULLER CO
- Product Name: FULL SET PLUS MULTIPURPOSE THINSET MORTAR (
- National Stock Number: 8030-00N026350
Product Identification
Product ID:FULL SET PLUS MULTIPURPOSE THINSET MORTAR (
MSDS Date:09/29/1988
FSC:8030
NIIN:00N026350
MSDS Number: BNCTH
Responsible Party
VADNAIS HEIGHTS, MN 55110
US
Emergency Phone: 800-228-5635
Info Phone: 612-481-3300
Preparer: JOHN DOLMAR
Cage: 0HD19
Contractor
Telephone: 612-481-3300
Cage: 0HD19
Ingredients
10 MG/M3
CAS: 65997-15-1
RTECS: VV8770000
Fraction By Weight: > 10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
SILICA, CRYSTALLINE - QUARTZ
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 50-60%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE AND SKIN IRRITANT. EYE
CONTACT MAY BE ABRASIVE. CHRONIC: LONG-TERM EXCESSIVE CRYSTALLINE
SILICA EXPOSURE CAN CAUSE PERMANENT LUNG DAMAGE. CRYSTALLINE SILICA
HAS BEEN IDENTIFIED BY IARC AS A PROBABLE HUMAN CARCINOGEN.
Explanation of Carcinogenicity:CRYSTALLINE SILICA QUARTZ: (IARC) 2A;
NTP - ANTICIPATED TO BE A CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING LUNG
CONDITIONS MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF DUST EXPOSURE.
First Aid
First Aid:INGEST: GIVE ONE GLASS OF WATER OR MILK. CONSULT A PHYSICIAN.
EYE: FLUSH IMMEDIATELY WITH WATER FOR AT LEAST 15 MIN. GET
IMMEDIATE MEDICAL ATTENTION. SKIN: WASH AFFECTED AREA WITH SOAP AND
WATER. INHA L: REMOVE TO FRESH AIR.
Fire Fighting
Extinguishing Media:NON-FLAMMABLE. EXTINGUISHING MEDIA SUITABLE FOR
SURROUNDING FIRE .
Fire Fighting Procedures:NONE KNOWN. WEAR NIOSH/MSHA APPROVED SCBA AND
FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SWEEP UP SPILLED MATERIAL. MOP UP RESIDUE WITH
WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY AREA.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED PARTICULATE RESPIRATOR
RECOMMENDED IN SITUATIONS WHERE DUSTING MAY OCCUR.
Ventilation:NO SPECIAL REQUIRMENTS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR TRADE NAME/PART NO: WHITE WALL, TA-381/TA-381-S.
Chemical Properties
HCC:N1
Appearance and Odor:SOLID
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:LANDFILL IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.