BNCWD - BONDING ADHESIVE, 9902

  • MSDS: BNCWD
  • Manufacturer: QUIKRETE CO
  • Product Name: BONDING ADHESIVE, 9902
  • National Stock Number: 8040-00N026593
Product Identification

Product ID:BONDING ADHESIVE, 9902
MSDS Date:01/01/1988
FSC:8040
NIIN:00N026593
MSDS Number: BNCWD

Responsible Party
QUIKRETE CO
1790 CENTURY CIRCLE
ATLANTA, GA 30345
US

Emergency Phone: 404-634-9100

Info Phone: 404-634-9100

Cage: 4B264

Contractor
THE QUIKRETE COMPANIES
ATLANTA, GA 30345 US

Telephone: 404-634-9100

Cage: 4B264

Ingredients

TRAVEL LONG DISTANCES/REACH WATERWAYS. ONCE EMULSION

RTECS: 9999999ZZ


CAN CAUSE MORE HARM TO AQUATIC SYSTEM THAN IF NO

RTECS: 9999999ZZ


IS DIFFICULT TO REMOVE IF ALLOWED TO DRY.

RTECS: 9999999ZZ


MAY CAUSE IRRIT TO EYES, SKIN, & MUC MEMB

RTECS: 9999999ZZ


ACETIC ACID, VINYL ESTER, POLYMER

CAS: 9003-20-7

RTECS: AK0920000


FORMALDEHYDE (SARA III)

CAS: 50-00-0

RTECS: LP8925000

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


VINYL ACETATE

CAS: 108-05-4

RTECS: AK0875000

OSHA PEL 10 PPM/15 STEL

ACGIH TLV: 10 PPM/15,A3 STEL;93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


SPILLS SHOULD BE CONTAINED & CLEANED UP

RTECS: 9999999ZZ


QUICKLY,BEFORE MATL DRIES. MUNICIPAL SEWAGE TREATMENT

RTECS: 9999999ZZ


BY EMULSIONS. CHEM COAGULATION OF DILUTED EMULSION IS

RTECS: 9999999ZZ


MAINTAINING PH OF 8 & MIXING SLOWLY. SETTLED SLUDGE

RTECS: 9999999ZZ


FOR DETAILED PROCEDURE. NONTOXIC BIODEGRADABLE

RTECS: 9999999ZZ


FOR ELIMINATING FOAM. DIKE SPILLS. LG QTY OF MATL

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ALTHOUGH FORMALDEHYDE IS MINOR VOLAT
COMPONENT OF THESE EMULSION PRODS, IS IMPORTANT TO RECOGNIZE THAT
RECENT TEST RESULTS HAVE SHOWN FORMALDEHYDE TO CAUSE CANCER IN LAB
ANIMALS. SINCE POTNTL CANCER H AZ NOT REFLECTED IN TLV, SUGGEST
INSTITUTION OF WORK PRACTICE STD TO MINIMIZE EXPOS TO LOWEST
FEASIBLE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:FORMALDEHYDE:GROUP 2A (IARC), GROUP 2
(NTP), OSHA REGULATED.
Effects of Overexposure:HLTH HAZ:LEVEL. FORMALDEHYDE READILY DETECTED
DUE TO IRRITANT PROPERTIES. ODOR DETECTION LEVEL VARIES AMONG
DIFFERENT INDIVIDUALS BETWEEN 0.2-1 PPM. IN ADDTN, ACCLIMATION WILL
OCCUR FROM RPTD EXPOS BU T SENSITIVITY RETURNS FOLLOWING REST
PERIOD AWAY FROM ATM CONTAINING FORMALDEHYDE. NO KNOWN SYMPS OF
INGESTION. (ING 13)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN:WASH W/WATER & SOAP. EYE:FLUSH W/COPIOUS QTYS OF WATER
FOR AT LEAST 15 MINUTES & GET MD. INGEST:NOT ANTICIPATED TO PRDCE
ADVERSE HEALTH EFFECTS BUT SHOULD BE REMOVED FROM STOMACH BY
INDUCED VOMIT ING/ASPIRATION. CALL MD. INHAL:REMOVE TO FRESH AIR.
SUPPORT BRTHG (GIVE O*2/ARTF RESP), CALL MD .

Fire Fighting

Extinguishing Media:FOR DRY POLYMER, USE WATER OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WHEN POLYMER BURNS,WATER, CO*2, CO & SMOKE ARE PRODUCED. PYROLYSIS
PRODS MAY INCLUDE SUCH MATLS (SUPP DATA)
Unusual Fire/Explosion Hazard:NO UNUSUAL FIRE OR EXPLOSION HAZARDS.

Accidental Release

Spill Release Procedures:DAM UP TO LIMIT SPREADING. MOP UP/ABSORB ON
INERT MATL & PLACE IN CNTNRS. IF SPILL OCCURS IN ENCLOSED AREA,
VENT. POLYMER MAY BE SEPARATED FROM WATER BY ADDTN OF ALUM & FERRIC
CHLORIDE. SPILLED EMULSI ON VERY SLIPPERY. USE CARE TO AVOID FALLS.
(ING 4)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL PLACE. AVOID FREEZING.
MINIMIZE CONTACT W/AIR TO PVNT INNOCULATION W/MICROORGANISMS WHICH
CAN CAUSE DECOMPOSITION & MOLDY OVERGROWTH.
Other Precautions:NORMAL CLEANLINESS SHOULD BE OBSERVED. CARE:PRODS
WILL IMPART WHITE MILKY COLOR TO WATER. WHEN WATER IS
AGITATED/TURBULENT, FOAMING CAN RESULT. AS SUPPLIED/DILUTED, PROD
MATL (FOAM INCLD) WHEN SPLASHE D ON AUTOS/OTHER PERS PROPERTY (ING
12)

Exposure Controls

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:IF HEADSPACE VENTILATION IS REQUIRED, USE HUMIDIFIED AIR TO
REDUCE SKIN FORMATION ON EMULSION SURFACE.
Protective Gloves:RUBBER PROTECTIVE GLOVES RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:REMOVE SATURATED CLOTHING & WASH CONTACTED SKIN
AREAS W/SOAP & WATER.
Supplemental Safety and Health
FIRE FIGHT PROC:AS ACETIC ACID, ACROLEIN OR ACETALDEHYDE. MASKS TO
REMOVE SMOKE & ORG VAP FROM RESPIRABLE AIR RECOMM FOR USE WHEN
FIGHTING FIRES INVOLVING VINYL ACETATE POLYMERS & COPOLYMERS. WASTE
DI SP METH:INCIN DIRECTLY UNDER APPROP COND. ALL FED, STATE &
LOCAL REGS REGARDING HLTH & POLLUTION SHOULD BE FOLLOWED.

Chemical Properties

Solubility in Water:MISCIBLE
Appearance and Odor:WHITE, MOBILE LIQUID W/PLEASANT, SWEET ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
WATER SENSITIVE MATERIAL SUCH AS SULFURIC ACID OR ALKALI MATERIALS SUCH
AS SODIUM OR METAL HYDRIDES.
Stability Condition to Avoid:COAGULATION MAY OCCUR FOLLOWING FREEZING,
THAWING OR BOILING.
Hazardous Decomposition Products:CO*2, CO AND SMOKE.

Disposal

Waste Disposal Methods:SML SPILLS (<100 GALS),DILUTE W/WATER. WASH INTO
INDUS SEWER. (WARNING! CONSULT LOCAL SEWER AUTHORITY BEFORE
DISCHARGING.) LG:PLACE IN SETTLING POND & ADD FERRIC CHLORIDE &
LIME. DECANT WATER. DISPOSE OF SOLIDS IN LANDFILL. EMULSION CAN
BE(SUPP DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.