Product ID:SOLDER
MSDS Date:09/01/1986
FSC:3439
NIIN:00N026370
MSDS Number: BNKYD

M C CANFIELD SONS

1000 BRIGHTON ST
UNION, NJ 07083
US

Emergency Phone: 201-688-5050

Info Phone: 201-688-5050

Cage: GO013

M C CANFIELD SONS

3100 UNION, NJ 07083 US

Telephone: (201) 688-5050

Cage: GO013

LEAD

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 1-99%

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.15 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 1-99%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:LEAD POISONING AFTER LONG-TERM EXTREME
EXPOSURE FROM INGESTION OR INHALATION OF COMPOUNDS OR FUMES.
NOTE:TOLUENE CAS#7439-92-1 APPEARS ON THE NAVY LISTING OF OCCUP
REPRO HAZ. SEEK CONSULTATION FROM AP PROP HLTH PROFESSIONALS
CONCERN LATEST HAZ LIST INFO AND SAFE HANDLING AND EXPOS
RECOMMENDATIONS.
Explanation of Carcinogenicity:LEAD:IARC GROUP 2B.
Effects of Overexposure:METALLIC TASTE, ABDOMINAL PAIN, NAUSEA, JOINT
OR MUSCLE PAIN OR WEAKNESS. POSSIBLE LOSS OF WEIGHT, MENTAL
CONFUSION, LEAD LINE ON GUMS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALATION: REMOVE IMMEDIATELY FROM AREA; SEE PHYSICIAN.
SKIN: IF BURNED FROM MOLTEN METAL, GIVE ORDINARY BURN FIRST AID.
EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES . INHALATION: REMOVE
FROM EXPOSURE. SUPPORT BREATHING (GIVE ARTIFICIAL
RESPIRATION/OXYGEN) .

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. IN EXTREMELY HIGH TEMP FIRES, LEAD MAY EMIT TOX FUMES. WHEN IN
PROXIMITY TO HIGH OXIDIZABLE (SUPP DATA)
Unusual Fire/Explosion Hazard:MODERATE HAZARD WHEN HIGH CONCENTRATION
OF VERY FINE METALLIC DUST IS EXPOSED TO HIGH HEAT OR OPEN FLAME.

Spill Release Procedures:NORMAL HOUSEKEEPING FOR SOLID METAL. METALLIC
POWDER OR DUST SHOULD BE VACUUMED OR WET SWEPT USING RESPIRATOR AND
PROTECTIVE CLOTHING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE GOOD HOUSEKEEPING PRACT TO PRVNT
ACCUMULATIONS OF DUST AND TO KEEP AIRBORNE DUST CONC AT MIN. AVOID
BRTHG DUST/FUMES. WASH HANDS AFTER HNDLG.
Other Precautions:DO NOT SMOKE OR EXPOSE FOOD TO DUST. KEEP AREA CLEAN.

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: FUME HOOD OVER WORK AREA. MECHANICAL: 200
FT/MIN AIR VELOCITY INTO HOOD OPENING.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY EYEWASH STATIONS SHOULD BE IN CLOSE
PROXIMITY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: MATERIALS AT VERY HIGH TEMPERATURES, LEAD MAY REACT
VIGOROUSLY.

HCC:N1
Boiling Pt:B.P. Text:>1700F
Vapor Pres:NONE
Spec Gravity:7.3-11.3
Solubility in Water:INSOLUBLE
Appearance and Odor:METALLIC COLOR, SOLID-GREY TO SHINY SILVERY GREY.

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES AND OXIDIZERS. MOLTEN METAL MAY REACT VIOLENTLY WITH
WATER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TEMPERATURE ABOVE MELTING POINT MAY
EMIT TOXIC FUMES.

Waste Disposal Methods:SCRAP DRIPPINGS AND DROSSES SHOULD BE STORED IN
CLOSED CONTAINER AND RETURNED TO LEAD RECYCLER. FOLLOW FEDERAL,
STATE AND LOCAL REGULATIONS REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.