BNKYS - ACRYSOL ASE-108 THICKENING AGENT, 65519

  • MSDS: BNKYS
  • Manufacturer: ROHM AND HAAS CO
  • Product Name: ACRYSOL ASE-108 THICKENING AGENT, 65519
  • National Stock Number: 6810-00N026498
Product Identification

Product ID:ACRYSOL ASE-108 THICKENING AGENT, 65519
MSDS Date:01/06/1988
FSC:6810
NIIN:00N026498
MSDS Number: BNKYS

Responsible Party
ROHM AND HAAS CO
INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19105
US

Emergency Phone: 215-592-3000;800-424-9300(CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

Contractor
ROHM AND HAAS CO
PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

Ingredients

ACRYLIC COPOLYMER

Fraction By Weight: 17-19%


RESIDUAL MONOMERS

Fraction By Weight: 0.1% MAX


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 81-83%

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT) > 5.0 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: VAPOR OR MIST CAN CAUSE
HEADACHE, NAUSEA, AND IRRITATION OF NOSE, THROAT AND LUNGS. SKIN:
IRRITATING TO SKIN UPON REPEATED OR PROLONGED CONTACT. EYE:
SLIGHTLY IRRITATING TO EYES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: MOVE SUBJECT TO FRESH AIR. EYE: FLUSH EYES WITH A
LARGE AMOUNT OF WATER FOR AT LEAST 15 MIN. SEE PHYSICIAN IF IRRIT
PERSISITS. SKIN: WASH AFFECTED SKIN AREAS WITH SOAP AND WATER.
INGEST: IF SWA LLOWED DILUTE BY GIVING 2 GLASSES OF WATER TO DRINK.
SEE A PHYSICIAN. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS
PERSON.

Fire Fighting

Flash Point:NON-COMBUSTIBLE
Extinguishing Media:EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE 100C/212F.
POLYMER FILM CAN BURN.

Accidental Release

Spill Release Procedures:KEEP SPECTATORS AWAY. FLOOR MAY BE SLIPPERY;
USE CARE TO AVOID FALLING. DIKE & CNTN SPILL W/INERT MATL. TRANSFER
LIQ TO CNTNRS FOR RECOVERY/DISP & SOLID DIKING MATL TO SEPERATE
CNTNRS FOR DISP. KEEP S PILLS & CLEANINING RUNOFFS OUT OF
(SUPPDATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORAGE TEMP: 1C-49C. KEEP FROM
FREEZING--PRODUCT MAY COAGULATE.
Other Precautions:MONOMER VAPS CAN BE EVOLVED WHEN PROD IS HEATED
DURING PROCESSING OPERATIONS. SUCH A CASE, USE LOC EXHST VENT W/A
MINIMUM CAPTURE VELOCITY OF 100FT/MIN AT THE POINT OF MONOMER
EVOLUTION. REFER TO "IND USTRIAL VENT: A MANUAL OF (SUPP DATA)

Exposure Controls

Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED.
WEAR NIOSH/MSHA APPROVED RESPIRATOR SUITABLE FOR CONCENTRATIONS OF
AIR CONTAMINANTS ENCOUNTERED.
Ventilation:MECHANICAL LOCAL EXHAUST VENTILATION AT POINT OF
CONTAMINANT RELEASE.
Protective Gloves:IMPERVIOUS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH: 2.4-3.4. SPILL PROC: MUNICIPAL SEWERS AND OPEN BODIES OF WATER.
OTHER PREC: "RECOMMENDED PRACTICE" PUBLISHED BY THE AMERICAN
CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS.

Chemical Properties

HCC:C3
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:0C/32F H*2O
Vapor Pres:17 @ 20C
Vapor Density:< 1, H*2O
pH:SUPDAT
Evaporation Rate & Reference:< 1 (BUTYL ACETATE=1)
Solubility in Water:DILUTABLE
Appearance and Odor:MILKY WHITE LIQUID; MILD ACRYLIC ODOR;
Percent Volatiles by Volume:81-83

Stability

Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:TEMPERATURES OVER 177C/350F.
Hazardous Decomposition Products:NONE KNOWN.

Disposal

Waste Disposal Methods:INCINERATE SOLIDS AND CONTAMINATED DIKING
MATERIAL AT A PERMITTED FACILITY IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.