BNLJY - LAMINATING ADHESIVE, 720
- MSDS: BNLJY
- Manufacturer: VIMASCO CORP
- Product Name: LAMINATING ADHESIVE, 720
- National Stock Number: 8040-00N027045
Product Identification
Product ID:LAMINATING ADHESIVE, 720
MSDS Date:11/07/1990
FSC:8040
NIIN:00N027045
MSDS Number: BNLJY
Responsible Party
US
Emergency Phone: 304-755-3328
Info Phone: 304-755-3328
Cage: 14947
Contractor
Telephone: 304-755-3328
Cage: 14947
Ingredients
CHLORINATED PARAFFIN
CAS: 68920-70-7
Fraction By Weight: 15-20%
0.05
CAS: 107-41-5
RTECS: SA0810000
Fraction By Weight: 1%
OSHA PEL 25 PPM, C
ACGIH TLV: 25 PPM, C
VINYLACETATE/DIBUTYLMALEATE
CAS: 25035-90-9
Fraction By Weight: 40-45%
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT) 4.7 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:(ING 3) EYES: TEARING, STINGING,
REDNESS; RESPIRATORY - COUGHING, SORENESS IN RESP TRACT, CHEST
TIGHTNESS, DIFFICULT BREATHING. (ING 1) ACUTE EXPOS MAY PRODUCE
MILD, REVERSIBLE SKIN & EYE IRRIT. CHRON IC EXPOS SUGGESTS A SLIGHT
HAZ SHOULD MASSIVE SYSTEMIC EXPOS OCCUR, W/LIVER AS THE PROBABLE
TARGET (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CHLOROALKANES: GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ: ORGAN. RECENT NATIONAL TOX PROGRAM
STUDIES HAVE SHOWN THAT A C12, 59% CHLORINATED PARAFFIN INCR THE
INCIDENCE OF TUMORS IN LAB ANIMALS WHEN FORCE FED IN COMBINATION
W/CORN OIL AT HIGH DOSES FOR LONG PERIODS OF TIME. (ING 2) IN HIGH
CONC, CAN BE AN IRRIT TO EYES, SKIN & MUC MEMB.
Medical Cond Aggravated by Exposure:PERSONS WITH PREEXISTING LUNG
DISORDERS MAY BE MORE SUSCEPTIBLE.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH CLEAN WATER
FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS, CALL MD. INHAL:
REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, ADMINISTER OXYGEN.
IF IRRI TATION PERSISTS, CALL MD. INGEST: GIVE TWO GLASSES OF
WATER, INDUCE VOMITING, CALL MD OR POISON CONTROL CENTER. NEVER
GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.
Fire Fighting
Flash Point:NO FL TO BOILING
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT
EQUIP . PROD WILL NOT BURN UNTIL WATER HAS BOILED/EVAP.
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:VENT AREA. CONTAIN LIQ W/INERT ABSORB SUCH AS
SAND. ABSORB LIQ USING AN INERT MATL SUCH AS SAND. ABSORB LIQ USING
AN INERT MATL & SHOVEL IN CNTNRS. PVNT PROD FROM ENTERING
STREAMS/DRINKING WATER SUPPL IES. BEFORE DRYING, PROD MAY BE WASHED
(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID BRTHG VAPS AND APPLICATN TO HOT
SURFACES, AS VAPS MAY BE IRRIT. KEEP CNTNR CLSD. USE WITH ADEQ
VENT. STORE INDOORS AT TEMPS OF 45-90F.
Other Precautions:FOR INDUSTRY/PROFESSIONAL USE ONLY. NOT INTENDED FOR
RETAIL SALE OR USE BY INDIVIDUAL CONSUMERS. DO NOT REUSE CONTAINER
FOR POTABLES OR EDIBLES.
Exposure Controls
Respiratory Protection:IN RESTRICTED VENT AREAS, USE NIOSH/MSHA APPRVD
CHEM VAP RESP. IN APPLICATNS WHERE MISTS/SPRAY MAY BE GENERATED,
AVOID INHALATION OF AIRBORNE PARTICULATES BY USING A NIOSH/MSHA
APPRVD RESP W/ORG VAP C ARTRIDGE W/PREFILTER FOR MIST/DUST.
Ventilation:GENERAL (MECHANICAL) ROOM VENTILATION WITH LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD.
Other Protective Equipment:EYEBATH.
Work Hygienic Practices:THOROUGHLY CLEANSE HANDS AFTER HANDLING.
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
SPILL PROC: AWAY WITH WATER; AFTER DRYING, REMOVE WITH A PAINT SCRAPER
OR STRONG SOLVENT.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:210F,99C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:SEE INGRED
Vapor Density:LTR/AIR
pH:7-8
Evaporation Rate & Reference:SAME AS WATER
Solubility in Water:APPRECIABLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:42
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES AND THE PRESENCE OF IRON OR ZINC WILL CATALYZE THE
DETERIORATION.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION WILL YIELD CO,
CO2, HCL, WITH TRACES OF FRAGMENTED SHORT-CHAIN HYDROCARBONS.
Disposal
Waste Disposal Methods:IN ACCORDANCE WITH ALL APPLICABLE REGULATIONS.
REVIEW HAZARD SECTION OF THIS SHEET BEFORE ATTEMPTING CLEANUP.
EMPTY CONTAINERS ARE NON HAZARDOUS UNDER RCRA AS INDUSTRIAL WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.