Product ID:227, ENGINE ENAMEL PONTIAC BLUE METALLIC
MSDS Date:10/15/1986
FSC:8010
NIIN:00N030861
MSDS Number: BNMLT

PLASTI-KOTE CO INC

1000 LAKE RD
MEDINA, OH 44256
US

Emergency Phone: 216-725-4511

Info Phone: 216-725-4511

Cage: 07778

TEMPO PRODUCTS CO A PLASTI-KOTE CO INC

MEDINA, OH 44256 US

Telephone: 330-725-4511

Cage: 07708

2-PENTANONE,4-HYDROXY-4-METHYL-; (DIACETONE ALCOHOL). VP

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 0-5%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM

2-PROPANOL, 1-METHOXY-; (PROPYLENE GLYCOL MONOMETHYL

CAS: 107-98-2

RTECS: UB7700000

Fraction By Weight: 0-5%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

186@20C

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 40-45%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PROPELLANTS CONSISTING OF INGREDIENTS 9-11

RTECS: 9999999ZZ

Fraction By Weight: 81%

PROPANE

CAS: 74-98-6

RTECS: TX2275000

OSHA PEL 1000 PPM

ACGIH TLV: SIMPLE ASPHYXIANT

PROPANE, 2-METHYL-; (ISOBUTANE MIXTURE)

CAS: 75-28-5

RTECS: TZ4300000

BUTANE; (N-BUTANE)

CAS: 106-97-8

RTECS: EJ4200000

OSHA PEL 800 PPM

ACGIH TLV: 800 PPM

NONHAZARDOUS INGREDIENTS

Fraction By Weight: 10-15%

SLOWER THAN ETHER (PROPELLANT FASTER)

RTECS: 9999999ZZ

TOLUENE, CAS#108-88-3 APPEARS ON THE

RTECS: 9999999ZZ

APPROP HLTH PROFESSIONALS CONCERN LATEST HAZ LIST

RTECS: 9999999ZZ

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5-10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

16@20C

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 10-15%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

70@20C

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 0-5%

OSHA PEL 200 PPM;300 PPM STEL

ACGIH TLV: 200 PPM;300 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

0.9@20C

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 0-5%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: EXCESSIVE INHAL OF VAP
CAN CAUSE NASAL & RESP IRRIT, DIZZ, WEAKNESS, FATG, NAUS, HDCH,
POSS UNCON & EVEN ASPHY. EYE:CAN CAUSE SEV IRRIT, REDNESS, TEARING,
BLURRED VISION. INGEST: CAN CAU SE GI IRRIT, NAUS, VOMIT, DIARR.
SKIN: CAN CAUSE IRRIT FOR SOME PERSONS. CHRONIC:NONE KNOWN. RPTS
HAVE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: ASSOCIATED REPEATED AND PROLONGED
OCCUPATIONAL OVEREXPOS TO SOLV WITH PERMANENT BRAIN AND NERVOUS
SYSTEM DAMAGE. SEVERE OVEREXPOSURE IN LAB ANIMALS HAS ALSO CAUSED
LIVER ABNORMALITIES & DAMG E TO KIDNEYS, LUNGS, & SPLEEN.
INTENTIONAL MISUSE BY DELIC CONC & INHALING CONTENTS MAY BE HARMFUL
OR FATAL. (ING 14)
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY &/OR
SKIN REACTION.

First Aid:INHAL: REMOVE TO FRESH AIR. IF BRTHG IS DFCLT, ADMINISTER O2.
IF BRTHG IS STOPPED, GIVE ARTF RESP & SEEK MED HELP. EYES: FLUSH
W/H2O FOR @ LST 15 MIN WHILE OCCAS HOLDING LIDS OPEN. GET MED ATTN.
INGES T: DO NOT INDUCE VOMIT(ASPIR OF MATL INTO LUNGS CAN CAUSE
CHEM PNEUM, WHICH CAN BE FATAL). KEEP PERSON WARM, QUIET, & GET MED
ATTN/POIS CTRL CTR. SKIN: WASH W/SOAP & H2O/VARIOUS HAND (SUPP
DATA)

Flash Point:0F,-18C
Lower Limits:1.0%
Extinguishing Media:"ALCOHOL" FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H2O
SPRAY MAY BE INEFTIVE. H2O MAY BE USED TO COOL CLSD CONTR TO PVNT
PRESS BUILD-UP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:CLSD CONTR MAY EXPLODE &/OR AUTOIGNITE
WHEN EXPOS TO EXTREME HEAT. VAP ARE HVR/AIR & MAY TRAVEL ALONG
GROUND/MAY BE MOVED BY VENT & IGNITED BY (SUPP DATA)

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT, OR
OTHER ABSORBENT MATERIAL AND TRANSFER TO A CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE IN AREAS ABOVE 120F, OR
IN DIRECT SUNLIGHT, OR NEAR HEAT OR OPEN FLAMES. DO NOT PUNCTURE OR
INCINERATE.
Other Precautions:STORE LARGE QTY IN BUILDINGS PROTECTED FOR STORAGE OF
CLASS IC FLAMMABLE LIQUIDS.

Respiratory Protection:FOR CASUAL/OCCAS USE-TO AVOID BRTHG VAP/SPRAY
MIST, OPEN WINDOWS & DOORS/USE OTHER MEANS TO ENSURE FRESH AIR
ENTRY DURING APPLICATN & DRYING. IF YOU EXPER EYE WATER, HDCH/DIZZ,
INCR FRESH AIR, WEAR NI OSH/MSHA APPRVD RESP (TC23/ (SUPP DATA)
Ventilation:FOR REGULAR/CONTINOUOUS USE-PROVIDE SUFFICIENT MECH(GEN)
&/OR LOC EXHAUST VENT TO MAINTAIN EXPOS BELOW TLV'S.
Protective Gloves:CHEM RESISTANT SUCH AS NEOPRENE.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WHERE SPECIAL OR UNUSAL CONDITIONS EXIST,
THE EXPERT ASSISTANCE OF AN INDUST HYGIENIST SHOULD BE SOUGHT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM. AS
WITH ALL CHEMICALS, MINIMIZE PERSONAL CONTACT AND BREATHING OF
VAPORS.
Supplemental Safety and Health
FIRE FIGHT PROC:AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF H2O IS
USED, FOG NOZZ ARE PREF. EXPLO HAZ: PILOTS LIGHTS, OTHER FLAMES,
SPARKS, HEATERS, SMOKING, ELEC MOTORS/OTHER IGNIT SOURCES @ LOCAT
IONS DISTANT FROM MATL HNDLG PT. FIRST AID PROC:CLEANERS, & WASH
CLTHG BEFORE RE-USE. RESP PROT:EQUIVALENT)/LEAVE AREA.

HCC:V3
Boiling Pt:B.P. Text:>133F,>56C
Melt/Freeze Pt:M.P/F.P Text:1500F,816C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:<1(H2O=1)
Evaporation Rate & Reference:ING 13
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT.
Percent Volatiles by Volume:85-90

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS AND HEAT.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CO2/CO,
VARIOUS HYDROCARBONS, NITROGEN COMPOUNDS, ETC., WHEN BURNED.

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
LOCAL, STATE, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.