Product ID:2332A9, RAPID SET EPOXY PART A
MSDS Date:08/14/1987
FSC:8030
NIIN:00N029258
MSDS Number: BNNRC

BAUER COATINGS DIV

1021 N MISSION RD
LOS ANGELES, CA 90033-1218
US

Emergency Phone: 213-225-4154

Info Phone: 213-225-4154

Cage: HO682

MORTON INTERNATIONAL

LOS ANGELES, CA 90033 US

Telephone: 213-225-4154

Cage: 7D283

EPOXY RESIN (MFR CAS#25036-38-6)

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 55%

PROPANE, 1,2-EPOXY-3-(O-TOLYOXY)-; (CRESYLGLYCIDYL ETHER).

CAS: 2210-79-9

RTECS: TZ3700000

Fraction By Weight: 5%

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: GASTRO-INTESTINAL
DISTRESS. SKIN: RPTD/PRLNG LIQUID CONT MAY CAUSE IRRIT W/DISCOMFORT
& DERMAT. MAY ALSO CAUSE ALLERGIC SKIN REACTIONS. INHAL: MAY CAUSE
NOSE/THROAT IRRIT. MAY CAUSE NER VS SYS DEPRESS CHARACT BY
FOLLOWING PROGRESSIVE STEPS: HDACH, DIZZ, NAUS, STAG GAIT,
CONFUSION, UNCON. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CHRONIC EFTS: TITANIUM DIOXIDE - NO
KNOWN HAZ W/NORM INDUS USE. IN A LIFE-TIME INHAL TEST, LUNG CANCERS
WERE FOUND IN SOME RATS EXPOSED TO 250 MG/M3 RESPIRABLE TITANIUM
DUST. ANALYSIS OF TIT ANIUM DIOXIDE CONC IN RAT'S LUNGS SHOWED THAT
LUNG CLEARANCE MECHANISM WAS OVERWHELMED & THAT RSLTS AT THE (SUPP
DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: CALL MD IMMEDIATELY AND HAVE NAMES OF INGREDIENTS
AVAILABLE. SKIN: IMMEDIATELHY WASH W/SOAP & PLENTY OF WATER. EYES:
IMMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. CALL
MD. INHAL : REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION, PREFERABLY MOUTH TO MOUTH. IF BREATHING DIFFICULTY
PERSISTS, OR OCCURS LATER, CONSULT MD.

Flash Point Method:TCC
Flash Point:240F,116C
Extinguishing Media:USE CHEMICAL FOAM, DRY CHEMICAL, OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER FROM FOG NOZZLES MAY BE USED TO COOL
CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP.
Unusual Fire/Explosion Hazard:COMBUSTIBLE - CLASS 3B. WHEN HEATED ABOVE
FLASH POINT, EMITS FLAMM VAPS WHICH, WHEN MIXED W/AIR, CAN BURN OR
BE EXPLOSIVE. FINE MISTS/SPRAYS MAY BE (SUPP DATA)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREAS. REMOVE MATERIAL WITH INERT ABSORBENT AND USE NON-SPARKING
TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE BELOW 120F. DOT STORAGE
CATEGORY: REFERENCE OSHA 1910.106. DO NOT CUT, GRIND, WELD, OR
DRILL NEAR THIS CONTAINER.
Other Precautions:AVOID EXPOSURE TO VAPS. GROUND CONTR WHILE POURING.
MINIMIZE DISTANCE OF FREE FALL TO AVOID STATIC ELECTRICITY
GENERATION. CONTRS, EVEN THOSE THAT HAVE BEEN EMPTIED, WILL RETAIN
PROD RESIDUE/ VAPORS. ALWAYS OBEY HAZ WARNINGS AND (SUPP DATA)

Respiratory Protection:VENTILATE WORKING SPACES TO BELOW TLV. IF LOCAL
EXHAUST NOT AVAILABLE, USE NIOSH/MSHA APPROVED RESPIRATORY DEVICE.
Ventilation:LOCAL EXHAUST TO MAINTAIN VAPOR CONCENTRATION BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH RECOMMENDED.
Work Hygienic Practices:REMOVE AND WASH CONTAMD CLTHG BEFORE REUSE.
DISCARD SHOES IF SATURATED. WHEN PART A IS MIXED WITH PART B AN
(SUPP DATA)
Supplemental Safety and Health
EXPLO HAZ: FLAMMABLE AT TEMP BELOW THE FLASH POINT. EFTS OF OVEREXP:
MASSIVE 250 MG/M3 LEVEL ARE NOT RELEVANT TO THE WORKPLACE. OTHER
PREC: HANDLE CONTRS AS IF THEY WERE FULL. HYGIENE PRACT: EXOTHERMI
C RXN OCCURS WHICH WILL PRDCE TEMP IN EXCESS OF 200F. ADDL PROT
EQUIP MUST BE WORN TO PROPERLY HANDLE THIS PROD MIX.

HCC:N1
Vapor Pres:SEE ING 2
Vapor Density:HVR/AIR
Spec Gravity:1.462
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:MAY LIBERATE CO, CO2, AND UNIDENTIFIED
ORGANIC COMPOUNDS IN BLACK SMOKE.

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL,
STATE, AND FEDERAL REGULATIONS. DO NOT INCINERATE IN A CLOSED
CONTAINER. COMPLY WITH ALL APPLICABLE GOVERNMENTAL REGULATIONS ON
SPILL REPORTING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.