BNPCM - 095-0000, SANDING SEALER CLEAR
- MSDS: BNPCM
- Manufacturer: DECRATREND PAINT CORP
- Product Name: 095-0000, SANDING SEALER CLEAR
- National Stock Number: 8030-00N030667
Product Identification
Product ID:095-0000, SANDING SEALER CLEAR
MSDS Date:06/09/1987
FSC:8030
NIIN:00N030667
MSDS Number: BNPCM
Responsible Party
CITY OF INDUSTRY, CA 91746
US
Emergency Phone: 818-333-4592
Info Phone: 818-333-4592
Cage: 42590
Contractor
Telephone: 818-333-4592
Cage: 42590
Ingredients
1.1@68F
CAS: 25013-15-4
RTECS: WL5075000
Fraction By Weight: <5.0%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM;100 PPM STEL
LIGROINE; (VM&P NAPTHA)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 20%
OSHA PEL 400 PPM;400 STEL
ACGIH TLV: 300 PPM
ALIPHATIC HYDROCARBONS
Fraction By Weight: 35%
OSHA PEL 500 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES: CAN CAUSE SEV IRRIT, RED,
TEARING, & BLURRED VISION. SKIN:CAN CAUSE MOD IRRIT, DEFAT, & DERM.
INHAL: CAN CAUSE NASAL & RESP IRRIT. ASPIR INTO LUNGS CAN CAUSE
CHEM PNEUM WHICH CAN BE FATAL. CHRONIC: PRLNG/RPTD EXPOS ABOVE TLV
MAY RSLT IN PERM BRAIN & NERV SYS DAM. INHAL: EXCESS INHAL OF VAP
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CAN CAUSE NASAL & RESP IRRIT, WEAK,
DIZZ, FATG, NAUS, HDCH & POSS UNCON & EVEN ASPHY. SKIN/EYE: PRLNG/
RPTD CONT CAN CAUSE MOD IRRIT, DEFAT, DERM. CAN CAUSE SEV EYE
IRRIT, RED, TEARING & BLU RRED VISION. SKIN ABSORP:ORG SOLV ARE
EASILY ABSORBED, DRYING OF SKIN, RED/DERM ARE SIGNS OF RPTD/OVEREXP
(SUPP DATA)
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYES: FLUSH IMMED W/LG AMTS OF H2O FOR @ LST 15 MIN. TAKE TO
PHYS FOR MED TRTMT. SKIN: WASH AFFECTED AREAS W/SOAP/ H2O. REMOVE
CONTAMD CLTHG. CONSULT PHYS IF IRRIT PERSISTS. INHAL: REMOVE TO
FRESH AIR . RESTORE BRTHG. TREAT SYMPTOMATICALLY.CONSULT PHYS.
INGEST: DRINK 1-2 GLASSES OF H2O TO DILUTE. DO NOT INDUCE VOMIT.
CONSULT PHYS OR POISON CONTROL CENTER IMMED. TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:TCC
Flash Point:57.0F,13.9C
Lower Limits:0.8%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . DURING EMERGENCY CONDITIONS OVEREXPOSURE TO
DECOMP PROD MAY CAUSE IMMED/DELAYED HLTH HAZ.
Unusual Fire/Explosion Hazard:VAP ARE HVR/AIR & MAY TRAVEL ALONG GROUND
& BE IGNITED BY HEAT, OPEN FLAME/OTHER IGNIT SOURCES. KEEP CONTR
TIGHTLY CLSD. ISOLATE FROM HEAT, SPARKS, (SUPP DATA)
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE, CONTAIN,
OR ABSORB WITH INERT MATERIALS (SAND, VERMICULITE, ETC.). TRANSFER
TO CONTAINERS FOR RECOVERY OR DISPOSAL. PREVENT RUNOFF INTO SEWERS,
STREAMS, OR OTHER BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE OR USE NEAR SOURCES OF
HIGH TEMPERATURES, NEAR FIRE OR OPEN FLAME, OR OTHER IGNITION
SOURCES.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED USE NIOSH/MSHA APPROVED
ORGANIC VAPOR AND MIST, SUPPLIED/SCBA.
Ventilation:USE ADEQUATE MECH (GEN &/OR LOCAL) VENTILATION TO MAINTAIN
EXPOSURE BELOW TLV.
Protective Gloves:RESISTANT GLOVES SUCH AS NITRILE RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING. EYEWASH STATIONS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EXPLO HAZ: ELECTRICAL EQUIPMENT, & OPEN FLAMES. CLOSED CONTAINERS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT. EFTS OF OVEREXP: TO THEIR
DEFATTING ACTION. INGEST: CAN CAUSE GASTROINTESTINAL IRRITATION, N
AUSEA, VOMITING AND DIARRHEA.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:184F,84C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:0.8(H2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NONE.
Appearance and Odor:TYPICAL FOR SOLVENT BASED COATING.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HIGH TEMPERATURES OR OPEN
IGNITION SOURCES.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CO2, CO,
VARIOUS HYDROCARBONS, ETC. ON THERMAL DECOMPOSITION.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE,
OR FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.