BNPCP - 061-0703, LATEX METAL PRIMER RED OXIDE

  • MSDS: BNPCP
  • Manufacturer: DECRATREND PAINT CORP
  • Product Name: 061-0703, LATEX METAL PRIMER RED OXIDE
  • National Stock Number: 8010-00N030670
Product Identification

Product ID:061-0703, LATEX METAL PRIMER RED OXIDE
MSDS Date:05/12/1987
FSC:8010
NIIN:00N030670
MSDS Number: BNPCP

Responsible Party
DECRATREND PAINT CORP
251 MASON WAY
CITY OF INDUSTRY, CA 91746
US

Emergency Phone: 818-333-4592

Info Phone: 818-333-4592

Cage: 42590

Contractor
DECRATREND PAINT CORP
CITY OF INDUSTRY, CA 91746 US

Telephone: 818-333-4592

Cage: 42590

Ingredients

0.2 @ 68F.

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: <5%


IRON (III) OXIDE;(IRON OXIDE)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: <5%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293


ZINC HYDROXYPHOSPHITE

CAS: 55799-16-1

Fraction By Weight: 10%

ACGIH TLV: 50 MPPCF (MFR)


SILICATE, MICA;(SILICEOUS MUSCOVITE MICA)

CAS: 12001-26-2

RTECS: VV8760000

Fraction By Weight: <5%

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3 RDUST; 9293


ACRYLIC EMULSION, WATER BASE;(AQUEOUS ACRYLIC EMULSION).

Fraction By Weight: 40%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY CAUSE IRRITATION TO SKIN,
EYES, AND INTESTINAL SYSTEMS. CHRONIC:PROLONGED OR REPEATED
OVEREXPOSURE TO DUST MAY CAUSE DELAYED LUNG DAMAGE. INHAL:ADVERSE
HEALTH EFTS FROM VAPS/SPRAY MISTS IN P OORLY VENT AREAS MAY INCL
IRRIT OF MUC MEMB OF NOSE, THROAT, & RESP TRACT & SYMPS OF
HDCH/NAUS. SKIN:(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:PROLONGED AND REPEATED CONTACT WITH
PRODUCT MAY CAUSE SKIN IRRITATION. REDNESS, DRYING OF SKIN, OR
OTHER SIGNS OF IRRITATION OR CONTACT DERMATITIS. INGEST:CAN CAUSE
GASTROINTESTINAL IRRITATIO N, NAUSEA, VOMITING & DIARRHEA. EYE:IN
DIRECT CONTACT, MAY CAUSE IRRITATION.
Medical Cond Aggravated by Exposure:NONE.

First Aid

First Aid:INHAL:MOVE TO FRESH AIR. EYE:FLUSH IMMEDIATELY WITH LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. GET MD. SKIN:REMOVE WITH
SOAP & WATER. REMOVE ALL CONTAMINATED CLOTHING. INGEST: DRINK 1 OR
2 GLASSE S OF WATER TO DILUTE. DO NOT INDUCE VOMITING. CALL MD OR
POISON CONTROL CENTER IMMEDIATELY. TREAT SYMPTOMATICALLY.

Fire Fighting

Flash Point Method:PMCC
Flash Point:225F,107C
Lower Limits:2.6%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . COOL CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HIGH
TEMPERATURES MAY EXPLODE OR BURST DUE TO BUILD UP OF STEAM
PRESSURE.

Accidental Release

Spill Release Procedures:DIKE, CONTAIN, OR ABSORB WITH INERT MATERIAL
(I.E., SAND, VERMICULITE, ETC.). TRANSFER TO CONTAINERS FOR
RECOVERY OR DISPOSAL. PREVENT RUNOFF INTO SEWERS, STREAMS, OR OTHER
BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT EXPOSE TO EXTREMES IN
TEMPERATURES. AVOID EXPOSURE TO HIGH TEMPERATURES. DO NOT ALLOW TO
FREEZE.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED. IF TLV IS EXCEEDED USE
NIOSH/MSHA APPROVED ORGANIC VAPOR AND MIST PROTECTION.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL AND/OR LOCAL) VENTILATION
OT MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:POLYETHYLENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERVIOUS CLOTHING. EYE WASH STATIONS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE ING
Vapor Density:LTR/AIR
Spec Gravity:1.3 (H2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETELY
Appearance and Odor:TYPICAL FOR WATER BASED LATEX COATING

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CO, CO2,
ETC.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE,
OR FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.