Product ID:50-699 BLUE TREE (D-168)
MSDS Date:06/06/1991
FSC:8010
NIIN:01-274-2568
MSDS Number: BNPXM

NILES CHEMICAL PAINT CO

225 FORT ST
NILES, MI 49120
US

Emergency Phone: 616-683-3377 OR 219-236-5856

Info Phone: 616-683-3377 OR 219-236-5856

Preparer: MIKE LICHATOWICH

Cage: 02388

NILES CHEMICAL PAINT

307 NILES, MI 49120 US

Telephone: 616-683-3377/219-236-5856

Cage: 02388

MINERAL SPIRITS (VAPOR PRESSURE 2.0 MM HG @ 20 C)

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 44%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

AEROSOL PROPELLANT (VAPOR PRESSURE 70 PSIG/MM HG @ 20 C)

CAS: 68476-86-8

Fraction By Weight: 22%

ACGIH TLV: 900 PPM

ALKYD RESIN

CAS: 68459-31-4

Fraction By Weight: 13%

COBALT COMPOUNDS (AS CO)

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: < 1%

OSHA PEL 0.1 MG/M3;AS CO

ACGIH TLV: 0.05 MG/M3;DUST 9293

MANGANESE COMPOUNDS (AS MN)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: < 1%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

PROPRIETARY INGREDIENTS (MFR STATES UNIDENTIFIED INGRED ARE

LD50 LC50 Mixture:NO
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: SEVERE IRRIT/LACRIMATION/REDNESS/
BLURRED VISION/VISUAL DISTURBANCE/EYE BURNS. SKIN: HARMFUL IF
ABSORBED THROUGH SKIN. ABSORBED IN TOXIC AMTS FROM PROLONG/REPEAT
EXPOS. INHAL: NASAL/RESP IRRIT/CS N DEPRESS
(DIZZINESS/DROWSINESS/WEAKNESS/FATIGUE/ CONFUSION)
NAUSEA/HEADACHE/VERTIGO/POSSIBLE UNCONSCIOUSNESS, EVEN##
Effects of Overexposure:##ASPHYXIATION. INGEST: GASTROINTESTINAL
IRRIT/ABDOMINAL PAIN/NAUSEA/VOMITING/DIARRHEA/BLINDNESS/EVEN DEATH.
CHRONIC: UNCONSCIOUSNESS, OMA, EATH DUE TO SUFFOCATION. TARGET
ORGANS: LUNGS, SKIN, EYES, R ESPIRATORY SYSTEM, CNS, GI TRACT.

First Aid:INHAL: MOVE IMMED TO FRESH AIR. IF BREATH STOPPED, GIVE ART
RESP. GET MED AID ASAP. SKIN: WASH W/SOAP & WTR. EYE: IMMED FLUSH
EYE W/LG AMT OF WTR FOR 15 MIN, LIFT LIDS. GET MED ATTN IMMED. WHEN
WORKIN G W/PROD DO NOT WEAR CONTACT LENSES. INGEST: INDUCE VOMITING
IMMED BY GIVING 2 GLASSES OF WTR & STICKING FINGER DOWN THROAT.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. GET MED AID
IMMED.

Flash Point Method:TCC
Flash Point:99.0F,37.2C
Lower Limits:0.8
Upper Limits:36.0
Extinguishing Media:DRY CHEMICAL, FOAM, CO2.
Fire Fighting Procedures:WEAR SCBA W/FULL FACEPIECE OPERATED IN
POSITIVE PRESS MODE, FULL PROTECT CLOTHING. USE WTR TO COOL CLSD
CNTNR TO PREVENT PRESS BLDUP/POSS AUTO IGNIT/EXPLO WHEN
Unusual Fire/Explosion Hazard:KEEP CNTNRS CLSD TIGHT. ISOLATE FROM
HEAT/ SPARKS/ELEC EQUIP/OPEN FLAME. CLSD CNTNRS MAY EXPLO W/EXTREME
HEAT. APPLICATION TO HOT SURFACES REQUIRES SPECIAL PRE

Spill Release Procedures:ELIM ALL IGNIT SOURCES. MINIMIZE THE BREATHING
OF VAPORS/AVOID SKIN CONTACT. ABSORB W/INERT MAT'L (CLAY/SOIL/
COMMERCIALLY AVAILABLE ABSORBENT). SHOVEL RECLAIMED LIQUID &
ABSORBENT INTO RECOVERY OR SA LVAGE DRUMS FOR DISPOSAL. DIKE TO
PREVENT FURTHER#
Neutralizing Agent:N/K ##MOVEMENT & RECLAIM INTO RECOVERY/SALVAGE
DRUMS/TANK TRUCK FOR DISPOSAL.

Handling and Storage Precautions:AVOID STORAGE IN HIGH TEMPERATURE
AREAS OR NEAR FIRE OR OPEN FLAME. KEEP CONTAINERS CLOSED WHEN NOT
IN USE. AVOID ROUGH HANDLING.
Other Precautions:CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN
EMPTY. DO NOT WELD OR FLAME CUT ON EMPTY DRUMS.

Respiratory Protection:WEAR APPROP (TYPE TC-23C-75) PROP FIT HALF-MASK/
FULL FACEPIECE RESP (NIOSH/MSHA) DURING/AFTER APPLICATION UNLESS
AIR MONITORING DEMONSTRATES VAPOR/MIST LEVELS ARE BELOW APPLICABLE
LIMITS. FOLLOW RESP MANUFACTURER'S DIRECTIONS FOR USE.
Ventilation:SUFFICIENT VENT IN VOLUME/PATTERN SHOULD BE PROVIDED TO
KEEP THE AIR CONCENTRATION BELOW CURRENT APPLICABLE OSHA
Protective Gloves:NITRILE OR VITON
Eye Protection:CHEM GOGGLES/SAFETY GLASSES/FACE SHIELDS
Other Protective Equipment:WASH PROMPTLY WHEN SKIN BECOMES
CONTAMINATED. REMOVE ANY CLOTHING THAT BECOMES WET (TO AVOID FLAMM
HAZARD).
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
RESTROOM.
Supplemental Safety and Health
PERMISSIBLE EXPOSURE LIMIT OR ACGIH'S TLV LIMIT. REMOVE DECOMPOSITION
PRODUCTS FORMED DURING WELDING OR FLAME CUTTING OF SURFACES COATED
WITH THIS PRODUCT. FOR BAKING FINISHES--VENT VAPORS EMITTED ON
HEATING.

HCC:F3
Boiling Pt:B.P. Text:-10 TO 330F
Vapor Density:> THAN AIR
Viscosity:55+ -5S
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SLIGHT
Appearance and Odor:LIQUID, ODOR OF SOLVENTS
Percent Volatiles by Volume:83.38

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS SUCH AS CHLORINE, ERMANGATES AND DICHROMATES, STRONG
OXIDIZERS.
Stability Condition to Avoid:HIGH TEMPERATURES, SHOCK FROM DROPPING.
EXPOSED TO EXTREME HEAT.
Hazardous Decomposition Products:CAN PRODUCE CARBON MONOXIDE AND/OR
CARBON DIOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH APPLICABLE LOCAL,
STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.