BNQBS - TIN LEAD ANTIMONY ALLOY XM-200 CORE
- MSDS: BNQBS
- Manufacturer: GARDINER METAL CO
- Product Name: TIN LEAD ANTIMONY ALLOY XM-200 CORE
- National Stock Number: 3439-00-602-5878
Product Identification
Product ID:TIN LEAD ANTIMONY ALLOY XM-200 CORE
MSDS Date:05/01/1990
FSC:3439
NIIN:00-602-5878
MSDS Number: BNQBS
Responsible Party
CHICAGO, IL 60632-1416
US
Emergency Phone: 312-847-0100/800-424-9300(CHEMTREC)
Info Phone: 312-847-0100
Cage: 73766
Contractor
Telephone: 312-847-0100 CHEMTREC AFTER HOURS
Cage: 84311
Ingredients
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 5-94.8%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 5-94.8%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9192
ANTIMONY (SARA III)
CAS: 7440-36-0
RTECS: CC4025000
Fraction By Weight: 0.2-2.0%
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG SB/M3; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ROSIN ACID
CAS: 8050-09-7
Hazards
LD50 LC50 Mixture:TLV FOR WELDING FUMES IS 5 MG/M3
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: FUMES AND GASES CAN CAUSE EYES
AND UPPER RESPIRATORY SYSTEM IRRITATION, AND CENTRAL NERVOUS SYSTEM
EFFECTS. ARC RAYS CAN INJURE EYES AND BURN SKIN. ELECTRIC SHOCK CAN
KILL. NOISE CAN DAMAGE HEA RING. CHRONIC: NEUROLOGICAL DAMAGE, LUNG
FIBROSIS, PNEUMOCONIOSIS. LEAD IS A SUSPECTED CARCINOGEN.
Explanation of Carcinogenicity:LEAD IS A SUSPECTED CARCINOGEN.
Effects of Overexposure:SHORT TERM EXPOSURE: METALLIC TASTE, NAUSEA,
FEVER, DIZZINESS, DRYNESS, IRRITATION OF EYES, NOSE AND THROAT,
SKIN SENSITIVITY. ACUTE EXPOSURE: SAME SYMPTOMS TO HIGHER DEGREE AS
WELL AS WATERY EYES, HE ADACHE, BREATHING DIFFICULTY, FREQUENT
COUGHING, CHEST PAINS.
Medical Cond Aggravated by Exposure:AGGRAVATION OF EXISTING RESPIRATORY
OR ALLERGIC CONDITIONS.HIGHER LEVEL OF LUNG RELATED PROBLEMS AMONG
SMOKERS.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. IF BREATHING IS DIFFICULT,
GIVE OXYGEN. IF NOT BREATHING, GIVE CPR. IF NO DETECTABLE PULSE,
GIVE HEART MASSAGE. EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 1 5 MINUTES. SKIN: TREAT FOR BURNS. INGESTION: SEEK MEDICAL
ATTENTION.
Fire Fighting
Extinguishing Media:DRY SAND, DRY CHEMICAL. DO NOT USE WATER.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.
Accidental Release
Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE
AND PLACE IN APPROPIATE DISPOSAL CONTAINER. AVOID INHALATION AND
SKIN EXPOSURE.
Handling
Handling and Storage Precautions:STORE IN DRY AREA. ELECTRODES EXPOSED
TO MOISTURE MAY EXPLODE VIOLENTLY IF USED. DRY MOIST RODS BY BAKING
AT 300F FOR TEN HOURS.
Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
MONITOR AIR TO ENSURE ACCEPTABLE EXPOSURES. AVOID ELECTRICAL SHOCK
BY MAINTAINING DRY WORK AREA.
Exposure Controls
Respiratory Protection:FUME RESPIRATOR OR AIR SUPPLIED RESPIRATOR IN
CONFINED SPACES OR WHERE VENTILATION DOES NOT KEEP EXPOSURE BELOW
TLV.
Ventilation:LOCAL EXHAUST TO KEEP BELOW TLV.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:HELMET OR FACE SHIELD WITH FILTER LENS.
Other Protective Equipment:SUBSTANTIAL DARK CLOTH, ARM PROTECTOR,
APRON, HAT AND SHOULDER PROTECTION. AIR SAMPLING TO DETERMINE
CORRECTIVE MEASURES
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING, SMOKING OR
USING SANITARY FACILITIES.
Supplemental Safety and Health
NONE.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:2516F,1380C
Melt/Freeze Pt:M.P/F.P Text:361F,183C
Vapor Pres:1
Spec Gravity:7.55-11.00
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GREY SOLID WIRE. ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:FUMES OF METALS AND METAL OXIDES FROM
ELECTRODE AND BASE METAL, CARBON MONOXIDE, CARBON DIOXIDE, OZONE,
NITROGEN OXIDES.
Disposal
Waste Disposal Methods:CONSULT WITH YOUR LOCAL ENVIRONMENTAL OFFICER.
DISPOSE OF FUMES, FLUX OR WELD GRINDING RESIDUE FROM THE WORK AREA
OR FROM FILTERS IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.