Product ID:2200, INDUSTRIAL MAINT ENAMEL
MSDS Date:05/01/1991
FSC:8010
NIIN:00N030428
MSDS Number: BNQQB

Emergency Phone: 310-531-0131

Info Phone: 310-531-0131

Cage: 5G582

Telephone: 310-531-0131

Cage: 5G582

5.0 @ 77F

CAS: 64742-47-8

Fraction By Weight: 31.24%

OSHA PEL 150 PPM (MFR)

ACGIH TLV: 150 PPM (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL:IRRIT OF NOSE, THROAT &
EYES, DIZZ, WEAKNESS, FATIGUE, NAUS, HDCH. SYMP DISAPPEAR WHEN
EXPOSURE CEASES. EYE/SKIN: CNTCT MAY CAUSE IRRIT. CHRONIC: REPORTS
HAVE SHOWN THAT REPEATED AND PRLN GD OCCUP OVEREXP TO SOLV CAN
CAUSE PERMANENT BRAIN & NERV SYS DMG.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:INHAL:DIZZ, HDCH. UNCON IN EXTREME CASES.
SKIN/EYE: IRRIT. AFFECTED AREA WILL SHOW SIGNS OF REDNESS & RASH IF
NOT WASHED WITH SOAPY WATER IMMED. INGEST: IRRIT OF THE RESP TRACT
CHARAC BY HDCH, DIZZ, S TAGGERING, CONFUSION & UNCON AND COMA IN
EXTREME CASES.
Medical Cond Aggravated by Exposure:PROLONGED AND REPEATED CONTACT MAY
CAUSE DERMATITIS.

First Aid:INHAL: REMOVE PATIENT TO FRESH AIR. EYE: FLUSH WITH PLENTY OF
WATER FOR AT LEAST 15 MIN. SKIN: REMOVE SOAKED CLOTHING AND WASH
SKIN WITH SOAP & WATER THOROUGHLY. SKIN ABSORP: APPLY LOTION OR OIL
TO AF FECTED AREA AFTER THOROUGH WASHING. INGEST: DO NOT INDUCE
VOMITING CALL PHYSICIAN IMMEDIATELY.

Flash Point:105F,41C
Lower Limits:1.0 %
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:FIGHT AS VOLATILE LIQ FIRE. CLSD CNTNRS MAY
EXPLO WHEN EXPOS TO EXTREME HEAT. KEEP AWAY FROM AREAS EXPOS TO
FIRE. WEAR NIOSH/MSHA APPRVD SCBA & FULL (SUPP DATA)
Unusual Fire/Explosion Hazard:AVOID APPLIC IN AREAS OF PILOT
LIGHT/SPARK/ OTHER IGNIT SORUCES AS VAP MAY ACCUM ON FLOOR &
IGNITE.KEEP CNTNRS CLSD TIGHTLY & STORE IN COOL PLACE WHEN NOT
USING

Spill Release Procedures:ABSORB SPILLED MATERIAL WITH ABSORBENTS, SUCH
AS SAWDUST, CLAYS, ETC AND FLUSH SPILL AREA WITH LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE NEAR OPEN FLAME/SOURCES
OF IGNIT. DO NOT STORE IN HIGH TEMP STORAGE. IN CASE OF FIRE,
REMOVE CLOSED CNTNRS FROM AREAS EXPOSED TO FIRE.
Other Precautions:EMPTY CNTNRS USUALLY STILL HOLD RESIDUES OF MATERIAL
AND VAPOR. THESE MUST BE CONSIDERED HAZARDOUS AND DISPOSED OF IN
ACCORDANCE WITH PROPER HANDLING PROCEDURES PRESCRIBED FOR HAZARDOUS
CHEMICALS.

Respiratory Protection:THE USE OF NIOSH/MSHA APPRVD RESP IS RECOM WHEN
USING SOLV BASED COATINGS. WHEN LEVEL OF SOLV VAPS IS NOT
KNOWN/EXCEEDS LEVEL @ WHICH REGULAR RESPS ARE EFTIVE, USE OF
NIOSH/MSHA APPRVD RESP SUCH AS TC -19C-NIOSH-MSHA IS HIGHLY
RECOMMENDED.
Ventilation:PROVIDE ADEQ VENT IN ALL WORKING AREAS AT ALL TIMES.
SERIOUS HLTH PROBLEMS COULD RSLT FROM RPTD/PROLNGD EXPOSURES.
Protective Gloves:NEOPRENE, BUNA N.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE GLOVES & GOGG TO PROT AGAINST ACCIDENTAL
SPLASHING OF LIQ ONTO SKIN/EYES. AVOID PROLONGED
CNTCT/OVEREXP.(SUPP DATA)
Work Hygienic Practices:STANDARD HYGIENIC PRACTICES MUST BE OBSERVED
WHEN HANDLING THIS PRODUCT AND ALL CHEMICALS.
Supplemental Safety and Health
FIRE FIGHT PROC: PROTECTIVE EQUIPMENT . OTHER PROT EQUIP: PROVIDE
ADEQUATE VENTILATION AT ALL TIMES WHEN APPLYING THIS PRODUCT.

HCC:F4
Boiling Pt:B.P. Text:168F,76C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.2 (H2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT SOLUBLE
Appearance and Odor:WHITE AND COLORED PAINTS WITH PAINT THINNER ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALIS. LONG TERM CONTACT WITH WATER.
Stability Condition to Avoid:AVOID OPEN FLAMES, WELDING ARCS OR OTHER
HIGH TEMPERATURE SOURCES WHICH INDUCE THERMAL DECOMPOSITION AND
FIRE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
DIOXIDE AND/OR CARBON MONOXIDE.

Waste Disposal Methods:DISPOSE OF ALL WASTES, INCLUDING ABSORBENTS USED
TO CLEAN UP SPILLS INTO 55-GAL METAL CONTAINERS AND DISPOSE IN
APPROVED DUMPSITE IN ACCORDANCE WITH PRESCRIBED FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.