BNRMB - 4445 SAVIN 9350 DISPERSANT

  • MSDS: BNRMB
  • Manufacturer: RICOH CORP
  • Product Name: 4445 SAVIN 9350 DISPERSANT
  • National Stock Number: 6850-01-343-2257
Product Identification

Product ID:4445 SAVIN 9350 DISPERSANT
MSDS Date:02/26/1991
FSC:6850
NIIN:01-343-2257
MSDS Number: BNRMB

Responsible Party
RICOH CORPORATION
5 DEDRICK PLACE
WEST CALDWELL, NJ 07006
US

Emergency Phone: 800-336-6737

Info Phone: 201-882-2000

Preparer: KRISTINA SAGE

Cage: 54726

Contractor
SAVIN CORP.
12070 STAMFORD, CT 06904-2270 US

Telephone: 203-967-5000

Cage: 29382

Ingredients

HYDROTREATED HEAVY NAPHTHA (ISOPAR)

CAS: 64742-48-9

Fraction By Weight: >99%


RESIN MALEATED POLYMER

Fraction By Weight: <1%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: SLIGHT CONJUNCTIVAL
IRRITATION. SKIN: MILD IRRITATION WITH EXCESSIVE EXPOSURE.
INHALATION: NO UNTOWARD EFFECTS. INGESTION: PRACTICALLY NON-TOXIC.
CHRONIC: HEALTH STUDIES HAVE SHOWN THAT M ANY PETROLEUM
HYDROCARBONS POSE POTENTIAL HEALTH RISKS WHICH MAY VARY FROM PERSON
TO PERSON.
Explanation of Carcinogenicity:NONE GIVEN BY MANUFACTURER.
Effects of Overexposure:HIGH VAPOR CONCENTRATIONS (GREATER THAN 1000
PPM) ARE IRRITATIVE TO EYES AND RESPIRATORY TRACT, MAY CAUSE
HEADACHES AND DIZZINESS, ARE ANESTHETIC AND MAY HAVE OTHER NERVOUS
SYSTEM EFFECTS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. SKIN: REMOVE ANY
CONTAMINATED CLOTHING. WASH AREA WITH SOAP AND WATER. INHALATION:
MOVE TO FRESH AIR. GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE
VOMITING. GET MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:TCC
Flash Point:109F,43C
Lower Limits:0.7%
Upper Limits:6.5%
Extinguishing Media:FOAM, WATER SPRAY, DRY CHEMICALS, OR CARBON
DIOXIDE.
Fire Fighting Procedures:USE STANDARD FIRE-FIGHTING PROCEDURE FOR
PETROLEUM BASED LIQUIDS. USE NIOSH/MSHA APPROVED SCBA FOR ENCLOSED
OR CONFINED SPACES. MINIMIZE BREATHING VAPORS/FUMES.
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX WITH STRONG OXIDIZING
AGENTS.

Accidental Release

Spill Release Procedures:SHUT OFF AND ELIMINATE ALL IGNITION SOURCES.
RECOVER FREE PRODUCT. APPLY SAND, EARTH, OR OTHER SUITABLE
ABSORBENT TO SPILL AREA. COLLECT CONTAMINATED ABSORBENT IN SUITABLE
CONTAINERS FOR DISPOSAL.KEEP PRODUCT OUT OF SEWERS AND
WATERCOURSESBY DIKING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, OPEN FLAME AND
SPARKS. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE (LIQUID/VAPOR) AND
CAN BE DANGEROUS. TO AVOID THE RISK OF EXPLOSION, DO NOT PUNCTURE,
INCINERATE, OR EXPOSE EMPTY CONTAINERS TO HEAT, FLAME, SPARKS, OR
OTHER SOURCES OF IGNITION.

Exposure Controls

Respiratory Protection:NONE NEEDED UNDER NORMAL CONDITIONS OF USE.
Ventilation:MECHANICAL: GENERAL VENTILATION ADEQUATE.
Protective Gloves:NONE NEEDED UNDER NORMAL CONDITIONS.
Eye Protection:NONE NEEDED UNDER NORMAL CONDITIONS.
Other Protective Equipment:NONE NEEDED UNDER NORMAL CONDITIONS OF USE.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
MINIMIZE BREATHING VAPOR OR MIST. AVOID PROLONGED OR REPEATED CONTACT
WITH SKIN. CLEANSE SKIN THOROUGHLY AFTER CONTACT.

Chemical Properties

HCC:F4
Boiling Pt:=161.1C, 322.F
B.P. Text:322F,161C
Vapor Pres:<10 (@26C)
Vapor Density:>5 (AIR=1)
Spec Gravity:0.75 (15C)
Evaporation Rate & Reference:0.3 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE. <0.1%
Appearance and Odor:CLEAR WATER WHITE LIQUID, FAINT PETROLEUM
HYDROCARBON ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZERS SUCH HAS LIQUID CHLORINE OR
CONCENTRATED OXYGEN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND OTHER
DECOMPOSITION PRODUCTS IN THE CASE OF INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:CONTACT YOUR LOCAL ENVIRONMENTAL OFFICER.
DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.