Product ID:THERMOFIT S-1006 ADHESIVE
MSDS Date:09/01/1988
FSC:8040
NIIN:00-922-8288
Kit Part:Y
MSDS Number: BNRRM

RAYCHEM CORP

300 CONSTITUTION DRIVE
MENLO PARK, CA 94025
US

Emergency Phone: 415-361-5524

Info Phone: 415-361-5524

Preparer: ARLENE KLONOFF

Cage: 06090

STEVEN INDUSTRIES

8 BAYONNE, NJ 07002-3417 US

Telephone: 201-437-6501

Cage: 33150

POLYAMIDE RESIN

CAS: 68410-23-1

TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

AMORPHOUS SILICA (INGREDIENT IN THIS PRODUCT IS BOUND IN

CAS: 112945-52-5

RTECS: VV7310000

LD50 LC50 Mixture:ORAL LD50 (RAT): >16 ML/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN, EYE, NOSE, AND THROAT
IRRITATION. MAY BE IRRITATING IF INGESTED BUT IS NOT KNOWN TO HAVE
OTHER HARMFUL EFFECTS. CALIFORNIA PROPOSITION 65 WARNING: THIS
PRODUCT CONTAINS TRACE AMOUNTS OF RESID UAL EPICHLOROHYDRIN, WHICH
IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER.
Explanation of Carcinogenicity:PRODUCT INGREDIENTS, PRESENT AT EQUAL TO
OR GREATER THAN 0.1% OF PRODUCT, ARE NOT LISTED AS SUSPECT
CARCINOGENS.

First Aid:EYES: FLUSH WITH WATER FOR WATER FOR AT LEAST 15 MINUTES.
SEEK MEDICAL ATTENTION. SKIN: WASH WITH MILD SOAP AND WATER.
INGESTION: SEEK MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR.
TREAT SYMPTOM ATICALLY.

Flash Point:>365F,>185C
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL
Fire Fighting Procedures:TOXIC FUMES MAY BE EVOLVED IN A FIRE. FIREMEN
SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS IN ENCLOSED AREAS.

Spill Release Procedures:DON APPROPRIATE PERSONAL PROTECTION BEFORE
RESPONDING. CONTAIN SPILL WITH INERT ABSORBENT. TAKE MEASURES TO
STOP SPILL AT THE SOURCE. TRANSFER CONTAMINATED ABOSRBENT INTO A
CONTAINER AND HANDLE AS HAZ ARDOUS WASTE.

Handling and Storage Precautions:PREVENT CONTACT WITH SKIN AND EYES.
WASH HANDS THOROUGHLY AFTER USE. USE ONLY WITH ADEQUATE
VENTILATION.
Other Precautions:CURING OF ADHESIVE SHOULD BE DONE IN A
WELL-VENTILATED AREA. THE CURING PROCESS IS EXOTHERMIC.

Respiratory Protection:IF VENTILATION IS INADEQUATE TO CONTROL VAPORS,
NIOSH/MSHA APPROVED AIR-PURIFYING RESPIRATORS ARE RECOMMENDED.
Ventilation:IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE, ENSURE
ADEQUATE VENTILATION DURING APPLICATION.
Protective Gloves:IMPERVIOUS GLOVES TO PREVENT CONTACT
Eye Protection:USE EYEWEAR AS APPROP TO GIVEN OPERATION
Supplemental Safety and Health

Solubility in Water:MODERATE
Appearance and Odor:VISCOUS, TAN LIQUID WITH AMMONIA-LIKE ODOR.

Stability Indicator/Materials to Avoid:YES
MAY REACT EXOTHERMICALLY (RELEASE HEAT) WITH ACIDS, BASES OR STRONG
OXIDIZING AGNETS.
Stability Condition to Avoid:STABLE AT ROOM TEMPERATURES.
Hazardous Decomposition Products:INCLUDES, NOT LIMITED TO: CO, CO2,
ACIDS, ALDEHYDES & NITROGEN COMPOUNDS. DEGRADATION PRODUCTS ARE
LIKELY TO BE TOXIC.

Waste Disposal Methods:MUST BE DISPOSED OF AS HAZARDOUS WASTE IN
ACCORDANCE WITH LOCAL, STATE, AND FEDERAL LAWS. DUMPING INTO SEWER,
ONTO THE GROUND OR INTO ANY BODY OF WATER IS PROHIBITED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.